Originally Posted by mdd1986
Cool I'm assuming you used something like autocad/solidworks to design them and just have a company laser cut them? i will be looking to do something similar on a building im doing with the same case.
I use solidworks, and lasercut them yes. Then I just drilled and tapped the rear to support M4 threads.
Originally Posted by MoDeNa
Great job! Excellent guide for cable modding and management.
If it is possible, could you please provide a list of all the material, including tools, to start doing cable sleeving like you do by ourselves?
I can't wait to try by myself.
Many thanks in advance.
Glad you like it!
All the tools, and stuff you need can be found on the links in the description of the video (e22.biz and pexon pcs). I think they are both out of crimpers, but those can be found on highflow.nl.
Then you "just" need wire, terminals for what you want to do (male/female). If you want to make extensions, then you need to sleeve one end with female, and the other with male terminals. If you want to make completely custom cables like I did here, you need female terminals in both ends (at least for Corsair PSU's. I also think all other modular PSU's uses male pins on the PSU end.) Depending on how much you want to sleeve, you will need around 40 meters of wires and 40 meters of sleeving. But measure up with some string before you order (measure each run, multiply by how many wires, add some for scrap and trial.)
Originally Posted by Drizztly
Beautiful cable management! Excited to see the midplate!
Video almost done!
Originally Posted by Groshek
It's looking great so far. I'll be checking your cable guide too
Originally Posted by madbrayniak
Can you list the exact types of tools you are using in your cable video?
I am familiar with a couple of them and the lighter goes without explanation but the wire stripper you are using I have not seen before and it looks like the stripper and what you are using to widen the pin looks to be the same?
Just curious as I really want to start doing my own cable sleeving as I start trying to elevate my PC building skills.
Nanotm posted a good reply above. The only thing is that I would get a crimper from highflow.nl, e22.biz or pexon pcs. The crimper is the last thing you want to cheap out on.
Thanks man! And thank you for the links!
Originally Posted by Blaze0303
Looks great so far!
@all, new video is soon done:D I just need to do some voice over so it should be up soon!