Originally Posted by changboy
Hi, i repair my voltage problem and iam verry happy, my pressure come down now.
I delid the cpu again, need a lot less pression for deliding the next time.
-First thing i saw when take off the cap is a splash of liquid metal on little module around the cpu. So when i recap it the first time maybe have lil bulb of liquid metal on a side and after apply pressure it splash !
- Then i bought remover too and i have clean all, take off the polish nails too.
- After i have a photocopy of the 7900x online delided and i counting all compoment around the cpu and nothing missing.
- I apply again liquid metal but so tin and on the cap more tin and put my hight temp silicon and put the cap.
When restart the pc voltage are ok on both side of dimm. The voltage wich was lower coz a shorting module are now a lil higher then the right side. I belive those controler have a kind of memory and when shorting it work harder to try upper the lower voltage. Iam sure in 24 hour voltage will be the same on both side.
Now i have left side 1.360 volt
right side 1.344 volt with aida 64 but in bios they show both 1.344.
Now all me memory is install on manuel setting at 3200mhz and its working fine.
So what we must learn about my story is ; when you delid a cpu and apply liquid metal inside, apply a verry verry tin layer coz with the pressure it will splash on the side.
Now without overclocking my temp idle is 17-18-19 Celcius and the max i see is 42-45-48 Celcius. Tomorrow i will begin overclock it for catch the max.
Those have deliding there cpu i want ask if you need less voltage after putting liquid metal inside for the same overclock ?
p.s: by the way sorry for my bad english lol. Voltage already drop to 1.344 volt then all perfect.