Overclock.net › Forums › AMD › AMD CPUs › AMD Ryzen Threadripper Owners Club - 1950X | 1920X | 1900X
New Posts  All Forums:Forum Nav:

AMD Ryzen Threadripper Owners Club - 1950X | 1920X | 1900X - Page 115

post #1141 of 2784
Quote:
Originally Posted by tarot View Post

dammit dammit dammit smile.gif

tried 4.1 went up to 1.38(offset llc2)
no dice crashes half way through my guess is I need a few more turns of the wheel not really wanting to do that on the h115i
and now I have ordered even more parts for the water cooling ....I decided to do 2 loops one for the vega and one for the threadripper....going to be a tight squeeze but I, m pretty sure with a dremmel hammer and I've it will all fit smile.gif

as a matter of interest, what settings are you using for 4.15 voltages etc?

I,m using pstates and offset voltages got to 4 pretty stable with only 1.3 volts but I wouldn't call it ultra stable.

and using the balanced power plan it happily drops to 2199 most of the time and the ramp up seems pretty good as well.

4.0 1.28xxx I turned pstates off so it's always @ 4.0 and for 4.15 I went all the way to 1.375 ... I don't think balanced mode is a good idea for threadripper
post #1142 of 2784
Quote:
Originally Posted by Bm514 View Post

4.0 1.28xxx I turned pstates off so it's always @ 4.0 and for 4.15 I went all the way to 1.375 ... I don't think balanced mode is a good idea for threadripper


Hi there wink.gif

https://www.kraytracing.com/kraybench/?b&publicid=71&lang=en
post #1143 of 2784
Quote:
Originally Posted by TheScarecow View Post

Hi there wink.gif

https://www.kraytracing.com/kraybench/?b&publicid=71&lang=en

Oh really it's like that .... gimme 2 sec
post #1144 of 2784
Im going to whip out 3733 ram clocks on you guys lol.
post #1145 of 2784
Quote:
Originally Posted by chew* View Post

Im going to whip out 3733 ram clocks on you guys lol.

your going to need to come out with the big guns to beat me now wink.gif
7th position 8916
https://www.kraytracing.com/kraybench/?b&publicid=72&lang=en
post #1146 of 2784
You sure you want to issue that challenge? My system lives right next to -40c bolt on goodness wink.gif
post #1147 of 2784
What voltage ⚡ Scarecow

Sent from my ONEPLUS A5000 using Tapatalk
post #1148 of 2784
Quote:
Originally Posted by Bm514 View Post

What voltage ⚡ Scarecow

Sent from my ONEPLUS A5000 using Tapatalk

1.437v teps dont go over 65c on the Tdie, still yet to bring that voltage down further to see how low it can go and still be stable or if its Prime95 stable (only just got the whole system up and working last night)
post #1149 of 2784
Quote:
Originally Posted by chew* View Post

You sure you want to issue that challenge? My system lives right next to -40c bolt on goodness wink.gif

Mate I wanna see what -40c will get from one of these beasts so bring it on biggrin.gif also do you know where I can find good info on doing ram timings for TR? im at 14-14-14-36 with no sub timings touched
post #1150 of 2784
All depends on board type of dimms SR or DR Ic brand etc etc but there a ton of guides.

In order for me to bolt up the phase change I need a medium in between cpu to maintain ram clocks.

to cold imc takes a huge dive but who knows TR may run hot enough for me not to use a spacer.


I will run this real quick to see how it scales ram clocks latency or neither.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › AMD Ryzen Threadripper Owners Club - 1950X | 1920X | 1900X