Overclock.net › Forums › AMD › AMD Motherboards › ASUS ROG Zenith Extreme X399 ThreadRipper Overclocking / Support
New Posts  All Forums:Forum Nav:

ASUS ROG Zenith Extreme X399 ThreadRipper Overclocking / Support - Page 129

post #1281 of 1719
Quote:
Originally Posted by Obsidience View Post

Can we see a picture of the box fan? LOL redface.gif

Ill take a video tonight and upload it on Youtube and post it here. Its quite comical.
post #1282 of 1719
Quote:
Originally Posted by Obsidience View Post

Quote:
Originally Posted by ENTERPRISE View Post

So in all importance which temp reading should I be reading? Thanks

Tdie is the number to look at, I've been as high as 88C (so 115tctl) Prime95 stable at 3.975ghz. I'm hoping some new watercooling equipment bumps me up past 4ghz.

Quote:
Originally Posted by Kriant View Post

Quote:
Originally Posted by ENTERPRISE View Post



So in all importance which temp reading should I be reading? Thanks

Tdie is what you need to look at primarily.

Thanks Guys. So I will look at Tdie, however what does tctl measure ?
post #1283 of 1719
Quote:
Originally Posted by sovereignty68 View Post

Did you install the modules into D1, C1, A1, B1 DIMM slots as mentioned in the manual? I had the exact same issue with CL14 3200Kit. I couldn't get them run stable beyond 3000 but it turns out because they were installed into C1, C2, A2, A1 slots. After I reinstall them into correct slots, now its rock stable.

yeah, I had them in the correct slots.

I got my new 3000 MHz CL14 kit today- as expected, it won't work at 3200 either (basically errors at the same rate the 3200 kit did). But it works at 3000 fine, so I'm happy with that. I guess my board/CPU is the limitation.
post #1284 of 1719
Thread Starter 
Quote:
Originally Posted by ENTERPRISE View Post




Thanks Guys. So I will look at Tdie, however what does tctl measure ?

tCTL is the real sensor, tDIE is not.

tDIE is tCTL with the temperature offset deducted, 27°C in the case of TR. So ref tDIE to know actual CPU temperature with offset removed.

Look at heading temp info in my Ryzen Essential thread.
Edited by gupsterg - 10/19/17 at 3:19pm
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
post #1285 of 1719
Quote:
Originally Posted by ENTERPRISE View Post




Thanks Guys. So I will look at Tdie, however what does tctl measure ?



Tdie is your ACTUAL temperature. Tctl is what the sensor reads but after amd has added their offset of +27c.

Basically, ignore tctl and look only at tdie
post #1286 of 1719
That's great thanks guys, glad to see my temps are in check !
post #1287 of 1719
Can anyone that has this kit G.SKILL TridentZ RGB Series 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Desktop Memory Model F4-3200C14Q-32GTZR post a stable OC with all their settings, voltages and all. My kit is supposed to arrive tomorrow and I want to be ahead of the ball to get some idea of what my settings should be like. it's a CAS 14
post #1288 of 1719
Hi Ivanov, I have 4 x F4-3200C14D-16GTZ which is the dual channel version, you have the quad channel version. I have 8 sticks (64GB) running just fine at 3066mhz with these settings:


Warning: Spoiler! (Click to show)
[2017/10/18 23:25:23]
Ai Overclock Tuner [Manual]
BCLK Frequency [Auto]
Custom CPU Core Ratio [Manual]
> FID [159]
> DID [8]
Overclocking Enhancement [Enabled]
Performance Bias [None]
Memory Frequency [DDR4-3066MHz]
Core Performance Boost [Disabled]
SMT Mode [Auto]
Spread Spectrum [Disabled]
EPU Power Saving Mode [Disabled]
TPU [Keep Current Settings]
CPU Core Voltage [Manual mode]
- CPU Core Voltage Override [1.45000]
CPU SOC Voltage [Offset mode]
VDDSOC Offset Mode Sign [+]
- VDDSOC Voltage Offset [0.06250]
DRAM AB Voltage [1.41500]
DRAM CD Voltage [1.41500]
1.8V PLL Voltage [1.80000]
1.05V SB Voltage [Auto]
Target TDP [Auto]
TRC_EOM [Auto]
TRTP_EOM [Auto]
TRRS_S_EOM [Auto]
TRRS_L_EOM [Auto]
TWTR_EOM [Auto]
TWTR_L_EOM [Auto]
TWCL_EOM [Auto]
TWR_EOM [Auto]
TFAW_EOM [Auto]
TRCT_EOM [Auto]
TREFI_EOM [Auto]
TRDRD_DD_EOM [Auto]
TRDRD_SD_EOM [Auto]
TRDRD_SC_EOM [Auto]
TRDRD_SCDLR_EOM [Auto]
TRDRD_SCL_EOM [Auto]
TWRWR_DD_EOM [Auto]
TWRWR_SD_EOM [Auto]
TWRWR_SC_EOM [Auto]
TWRWR_SCDLR_EOM [Auto]
TWRWR_SCL_EOM [Auto]
TWRRD_EOM [Auto]
TRDWR_EOM [Auto]
TWRRD_SCDLR_EOM [Auto]
Mem Over Clock Fail Count [Auto]
DRAM CAS# Latency [14]
DRAM RAS# to CAS# Read Delay [14]
DRAM RAS# to CAS# Write Delay [14]
DRAM RAS# PRE Time [14]
DRAM RAS# ACT Time [28]
Trc [50]
TrrdS [6]
TrrdL [9]
Tfaw [36]
TwtrS [4]
TwtrL [12]
Twr [10]
Trcpage [Auto]
TrdrdScl [2]
TwrwrScl [2]
Trfc [307]
Trfc2 [Auto]
Trfc4 [Auto]
Tcwl [14]
Trtp [8]
Trdwr [Auto]
Twrrd [3]
TwrwrSc [1]
TwrwrSd [7]
TwrwrDd [7]
TrdrdSc [1]
TrdrdSd [5]
TrdrdDd [5]
Tcke [8]
ProcODT [53.3 ohm]
Cmd2T [2T]
Gear Down Mode [Disabled]
Power Down Enable [Auto]
RttNom [Auto]
RttWr [Auto]
RttPark [Auto]
MemAddrCmdSetup [Auto]
MemCsOdtSetup [Auto]
MemCkeSetup [Auto]
MemCadBusClkDrvStren [Auto]
MemCadBusAddrCmdDrvStren [Auto]
MemCadBusCsOdtDrvStren [Auto]
MemCadBusCkeDrvStren [Auto]
VTTDDR AB Voltage [Auto]
VTTDDR CD Voltage [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
DRAM CTRL REF Voltage on CHC [Auto]
DRAM CTRL REF Voltage on CHD [Auto]
VPP DRAM AB [Auto]
VPP DRAM CD [Auto]
1.8V Standby Voltage [Auto]
CPU 3.3v AUX [Auto]
2.5V SB Voltage [Auto]
DRAM R1 Tune [Auto]
DRAM R2 Tune [Auto]
DRAM R3 Tune [Auto]
DRAM R4 Tune [Auto]
Sense MI Skew [Auto]
Sense MI Offset [Auto]
Clock Amplitude [Auto]
PLL Tune R1 [Auto]
PLL Tune R2 [Auto]
PCIE Tune R1 [Auto]
PCIE Tune R2 [Auto]
PCIE Tune R3 [Auto]
Ln2 Tune [Auto]
PLL Reference Voltage [Auto]
PLL Reference Voltage 2 [Auto]
Short Reset [Auto]
CLDO VDDP voltage [Auto]
CPU Load-line Calibration [Level 4]
CPU Current Capability [120%]
CPU VRM Switching Frequency [Auto]
VRM Spread Spectrum [Auto]
CPU Power Duty Control [T.Probe]
CPU Power Phase Control [Auto]
CPU Power Thermal Control [130]
VDDSOC Load-line Calibration [Level 2]
VDDSOC Current Capability [140%]
VDDSOC Switching Frequency [Auto]
VDDSOC Phase Control [Auto]
VDDSOC Power Thermal Control [120]
DRAM Current Capability(CHA, CHB) [130%]
DRAM Current Capability(CHC, CHD) [130%]
DRAM Power Phase Control(CHA, CHB) [Extreme]
DRAM Power Phase Control(CHC, CHD) [Extreme]
DRAM Switching Frequency(CHA, CHB) [Auto]
DRAM Switching Frequency(CHC, CHD) [Auto]
DRAM VBoot Voltage AB [1.40000]
DRAM VBoot Voltage CD [1.40000]
Security Device Support [Enable]
Security Device Support [Enable]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement Hierarchy [Enabled]
TPM2.0 UEFI Spec Version [TCG_2]
Physical Presence Spec Version [1.3]
TPM Device Selection [Discrete TPM]
Erase fTPM NV for factory reset [Enabled]
SATA Port Enable [Enabled]
PT Aggresive SATA Device Sleep Port 0 [Auto]
PT Aggresive SATA Device Sleep Port 1 [Auto]
PT XHCI GEN1 [Auto]
PT XHCI GEN2 [Auto]
PT USB Equalization4 [Auto]
PT USB Redriver [Auto]
U31G2_1 [Enabled]
USB3.1_2 [Enabled]
U31G1_9 [Enabled]
U31G1_10 [Enabled]
U31G1_11 [Enabled]
U31G1_12 [Enabled]
PT USB30 PORT4 [Enabled]
PT USB30 PORT5 [Enabled]
USB13 [Enabled]
USB14 [Enabled]
USB_3 [Enabled]
USB_5 [Enabled]
USB_6 [Enabled]
USB_4 [Enabled]
PT PCIE PORT 0 [Auto]
PT PCIE PORT 1 [Auto]
PT PCIE PORT 2 [Auto]
PT PCIE PORT 3 [Auto]
PT PCIE PORT 4 [Auto]
PT PCIE PORT 5 [Auto]
PT PCIE PORT 6 [Auto]
PT PCIE PORT 7 [Auto]
Onboard LED [Enabled]
SATA Port Enable [Enabled]
SATA Mode [AHCI]
SMART Self Test [Enabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
ErP Ready [Disabled]
Restore On AC Power Loss [Power Off]
Power On By PCI-E/PCI [Disabled]
Power On By RTC [Disabled]
HD Audio Controller [Disabled]
CPU PCIE Link Mode [Auto]
SB PCIE Link Mode [Auto]
PCIEX16_1 Bandwidth [X16 Mode]
PCIEX8_2 Bandwidth [X8 Mode]
PCIEX16_3 Bandwidth [X16 Mode]
PCIE_X8/X4_4 Bandwidth [X4 Mode]
Asmedia USB 3.1 Controller [Enabled]
USB Type C Power Switch for U31G2_1 [Auto]
USB Type C Power Switch for U31G2_EC1 [Auto]
When system is in working state [On]
When system is in sleep, hibernate or soft off states [On]
Intel LAN Controller [Enabled]
Intel LAN OPROM [Disabled]
Wi-Fi Controller [Disabled]
Bluetooth Controller [Disabled]
NX Mode [Enabled]
SVM Mode [Enabled]
Network Stack [Disabled]
Debug Port Table [Disabled]
Debug Port Table 2 [Disabled]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
UFD 2.0 Silicon-Power16G1100 [Auto]
U31G2_EC1 [Enabled]
U31G2_E2 [Enabled]
U31G2_1 [Enabled]
U31G1_1 [Enabled]
U31G1_2 [Enabled]
U31G1_3 [Enabled]
U31G1_4 [Enabled]
U31G1_5 [Enabled]
U31G1_6 [Enabled]
U31G1_7 [Enabled]
U31G1_8 [Enabled]
U31G1_9 [Enabled]
U31G1_10 [Enabled]
U31G1_11 [Enabled]
U31G1_12 [Enabled]
USB13 [Enabled]
USB14 [Enabled]
CPU Temperature [Monitor]
MotherBoard Temperature [Monitor]
VRM Temperature [Monitor]
PCH Temperature [Monitor]
T_Sensor1 Temperature [Monitor]
T_Sensor2 Temperature [Monitor]
DIMM.2 sensor1 Temperature [Monitor]
DIMM.2 sensor2 Temperature [Monitor]
EXT_Sensor1 Temperature [Monitor]
EXT_Sensor2 Temperature [Monitor]
EXT_Sensor3 Temperature [Monitor]
CPU Fan Speed [Monitor]
Chassis Fan 1 Speed [Monitor]
Chassis Fan 2 Speed [Monitor]
HAMP Fan Speed [Monitor]
W_PUMP+ Speed [Monitor]
CPU Optional Fan Speed [Monitor]
COV Fan Speed [Monitor]
Extension Fan 1 Speed [Monitor]
Extension Fan 2 Speed [Monitor]
Extension Fan 3 Speed [Monitor]
W FLOW1 Speed [Monitor]
Water In T Sensor Temperature [Monitor]
Water Out T Sensor Temperature [Monitor]
W FLOW2 Speed [Monitor]
WB In T Sensor Temperature [Monitor]
WB Out T Sensor Temperature [Monitor]
CPU Core Voltage [Monitor]
3.3V Voltage [Monitor]
5V Voltage [Monitor]
12V Voltage [Monitor]
CPU Q-Fan Control [PWM Mode]
CPU Fan Smoothing Up/Down Time [0 sec]
CPU Fan Speed Lower Limit [200 RPM]
CPU Fan Profile [Standard]
W_PUMP+ Control [Disabled]
COV Fan Q-Fan Control [DC Mode]
COV Fan Smoothing Up/Down Time [0 sec]
COV Fan Upper Temperature [95]
COV Fan Max. Duty Cycle (%) [100]
COV Fan Middle Temperature [90]
COV Fan Middle. Duty Cycle (%) [100]
COV Fan Lower Temperature [44]
COV Fan Min. Duty Cycle (%) [23]
Allow Fan Stop [Enabled]
Chassis Fan 1 Q-Fan Control [Auto]
Chassis Fan 1 Q-Fan Source [CPU]
Chassis Fan 1 Smoothing Up/Down Time [0 sec]
Chassis Fan 1 Speed Low Limit [200 RPM]
Chassis Fan 1 Profile [Standard]
Chassis Fan 2 Q-Fan Control [Auto]
Chassis Fan 2 Q-Fan Source [CPU]
Chassis Fan 2 Smoothing Up/Down Time [0 sec]
Chassis Fan 2 Speed Low Limit [200 RPM]
Chassis Fan 2 Profile [Standard]
HAMP Fan Q-Fan Control [Auto]
HAMP Fan Source [CPU]
HAMP Fan Smoothing Up/Down Time [0 sec]
HAMP Fan Speed Low Limit [200 RPM]
HAMP Fan Profile [Standard]
Extension Fan 1 Q-Fan Control [DC Mode]
Extension Fan 1 Q-Fan Source [CPU]
Extension Fan 1 Speed Low Limit [200 RPM]
Extension Fan 1 Profile [Standard]
Extension Fan 2 Q-Fan Control [DC Mode]
Extension Fan 2 Q-Fan Source [CPU]
Extension Fan 2 Speed Low Limit [200 RPM]
Extension Fan 2 Profile [Standard]
Extension Fan 3 Q-Fan Control [DC Mode]
Extension Fan 3 Q-Fan Source [CPU]
Extension Fan 3 Speed Low Limit [200 RPM]
Extension Fan 3 Profile [Standard]
OnChip SATA Channel [Enabled]
OnChip SATA Type [AHCI]
U31G1_1 [Enabled]
U31G1_2 [Enabled]
U31G1_3 [Enabled]
U31G1_4 [Enabled]
U31G1_5 [Enabled]
U31G1_6 [Enabled]
U31G1_7 [Enabled]
U31G1_8 [Enabled]
IR Config [Disabled]
SD Mode [Disabled]
SdForce18 Enable [Disabled]
SD Mode configuration [AMDA]
Uart 0 Enable [Disabled]
Uart 1 Enable [Disabled]
I2C 0 Enable [Disabled]
I2C 1 Enable [Disabled]
I2C 2 Enable [Disabled]
I2C 3 Enable [Disabled]
Restore On AC Power Loss [Power Off]
GPIO Devices Support [Disabled]
ESATA Port On Port 0 [Disabled]
ESATA Port On Port 1 [Disabled]
ESATA Port On Port 2 [Disabled]
ESATA Port On Port 3 [Disabled]
ESATA Port On Port 4 [Disabled]
ESATA Port On Port 5 [Disabled]
ESATA Port On Port 6 [Disabled]
ESATA Port On Port 7 [Disabled]
SATA Power On Port 0 [Enabled]
SATA Power On Port 1 [Enabled]
SATA Power On Port 2 [Enabled]
SATA Power On Port 3 [Enabled]
SATA Power On Port 4 [Enabled]
SATA Power On Port 5 [Enabled]
SATA Power On Port 6 [Enabled]
SATA Power On Port 7 [Enabled]
SATA Port 0 MODE [Auto]
SATA Port 1 MODE [Auto]
SATA Port 2 MODE [Auto]
SATA Port 3 MODE [Auto]
SATA Port 4 MODE [Auto]
SATA Port 5 MODE [Auto]
SATA Port 6 MODE [Auto]
SATA Port 7 MODE [Auto]
SATA Hot-Removabel Support [Disabled]
SATA 6 AHCI Support [Disabled]
Int. Clk Differential Spread [Disabled]
SATA MAXGEN2 CAP OPTION [Disabled]
SATA CLK Mode Option [INT 100MHz]
Aggressive Link PM Capability [Enabled]
Port Multiplier Capability [Enabled]
SATA Ports Auto Clock Control [Enabled]
SATA Partial State Capability [Enabled]
SATA FIS Based Switching [Enabled]
SATA Command Completion Coalescing Support [Disabled]
SATA Slumber State Capability [Enabled]
SATA MSI Capability Support [Disabled]
SATA Target Support 8 Devices [Disabled]
Generic Mode [Disabled]
SATA AHCI Enclosure [Disabled]
SATA SGPIO 0 [Disabled]
SATA SGPIO 1 [Disabled]
SATA PHY PLL [Disabled]
AC/DC Change Message Delivery [Disabled]
TimerTick Tracking [Enabled]
Clock Interrupt Tag [Enabled]
EHCI Traffic Handling [Disabled]
Fusion Message C Multi-Core [Disabled]
Fusion Message C State [Disabled]
SPI Auto Mode [Disabled]
SPI Read Mode [Default]
SPI 100MHz Support [Enabled]
SPI Normal Speed [33MHz]
SPI Fast Read Speed [Default]
SPI Burst Write [Disabled]
I2C 0 D3 Support [Enabled]
I2C 1 D3 Support [Enabled]
I2C 2 D3 Support [Enabled]
I2C 3 D3 Support [Enabled]
UART 0 D3 Support [Enabled]
UART 1 D3 Support [Enabled]
SATA D3 Support [Enabled]
EHCI D3 Support [Enabled]
XHCI D3 Support [Enabled]
SD D3 Support [Enabled]
S0I3 [Disabled]
Chipset Power Saving Features [Enabled]
SB Clock Spread Spectrum [Enabled]
SB Clock Spread Spectrum Option [-0.375%]
HPET In SB [Enabled]
MsiDis in HPET [Disabled]
_OSC For PCI0 [Enabled]
USB Phy Power Down [Disabled]
PCIB_CLK_Stop Override [0]
USB MSI Option [Disabled]
LPC MSI Option [Disabled]
PCIBridge MSI Option [Disabled]
AB MSI Option [Disabled]
SB C1E Support [Disabled]
SB Hardware Reduced Support [Disabled]
GPP Serial Debug Bus Enable [Disabled]
Fast Boot [Enabled]
Next Boot after AC Power Loss [Normal Boot]
Boot Logo Display [Auto]
POST Delay Time [3 sec]
Boot up NumLock State [Enabled]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Enabled]
Interrupt 19 Capture [Disabled]
Setup Mode [Advanced Mode]
Launch CSM [Disabled]
OS Type [Other OS]
Setup Animator [Disabled]
Load from Profile [1]
Profile Name [3066mhz stable]
Save to Profile [3]
CPU Core Voltage [Auto]
VDDSOC Voltage [Auto]
1.8V PLL Voltage [Auto]
BCLK Frequency [Auto]
CPU Ratio [Auto]
Bus Interface [PCIEX16_1]

I could absolutely not get 8 sticks stable at anything faster than 3066. Right now I'm just tweaking subsettings noted in this video: https://www.youtube.com/watch?v=urVJR_qh-2c&list=WL&index=8&t=1s. He's a funny guy but the info is awesome, I just made the first two changes to Trc and Trfc and am running MemTest86 now...

Hope that's helpful!

EDIT: it's easy to miss but also the VBOOT voltages need to be changed.
EDIT#2: I was able to run 4 sticks at 3333mhz with Stilt's fast profile with 1.4v VDIMM and 1.43 VBOOT voltages. I'm not sure if you have 4 or 8 sticks.
Edited by Obsidience - 10/19/17 at 4:36pm
post #1289 of 1719
Quote:
Originally Posted by Obsidience View Post

Hi Ivanov, I have 4 x F4-3200C14D-16GTZ which is the dual channel version, you have the quad channel version. I have 8 sticks (64GB) running just fine at 3066mhz with these settings:


Warning: Spoiler! (Click to show)
[2017/10/18 23:25:23]
Ai Overclock Tuner [Manual]
BCLK Frequency [Auto]
Custom CPU Core Ratio [Manual]
> FID [159]
> DID [8]
Overclocking Enhancement [Enabled]
Performance Bias [None]
Memory Frequency [DDR4-3066MHz]
Core Performance Boost [Disabled]
SMT Mode [Auto]
Spread Spectrum [Disabled]
EPU Power Saving Mode [Disabled]
TPU [Keep Current Settings]
CPU Core Voltage [Manual mode]
- CPU Core Voltage Override [1.45000]
CPU SOC Voltage [Offset mode]
VDDSOC Offset Mode Sign [+]
- VDDSOC Voltage Offset [0.06250]
DRAM AB Voltage [1.41500]
DRAM CD Voltage [1.41500]
1.8V PLL Voltage [1.80000]
1.05V SB Voltage [Auto]
Target TDP [Auto]
TRC_EOM [Auto]
TRTP_EOM [Auto]
TRRS_S_EOM [Auto]
TRRS_L_EOM [Auto]
TWTR_EOM [Auto]
TWTR_L_EOM [Auto]
TWCL_EOM [Auto]
TWR_EOM [Auto]
TFAW_EOM [Auto]
TRCT_EOM [Auto]
TREFI_EOM [Auto]
TRDRD_DD_EOM [Auto]
TRDRD_SD_EOM [Auto]
TRDRD_SC_EOM [Auto]
TRDRD_SCDLR_EOM [Auto]
TRDRD_SCL_EOM [Auto]
TWRWR_DD_EOM [Auto]
TWRWR_SD_EOM [Auto]
TWRWR_SC_EOM [Auto]
TWRWR_SCDLR_EOM [Auto]
TWRWR_SCL_EOM [Auto]
TWRRD_EOM [Auto]
TRDWR_EOM [Auto]
TWRRD_SCDLR_EOM [Auto]
Mem Over Clock Fail Count [Auto]
DRAM CAS# Latency [14]
DRAM RAS# to CAS# Read Delay [14]
DRAM RAS# to CAS# Write Delay [14]
DRAM RAS# PRE Time [14]
DRAM RAS# ACT Time [28]
Trc [50]
TrrdS [6]
TrrdL [9]
Tfaw [36]
TwtrS [4]
TwtrL [12]
Twr [10]
Trcpage [Auto]
TrdrdScl [2]
TwrwrScl [2]
Trfc [307]
Trfc2 [Auto]
Trfc4 [Auto]
Tcwl [14]
Trtp [8]
Trdwr [Auto]
Twrrd [3]
TwrwrSc [1]
TwrwrSd [7]
TwrwrDd [7]
TrdrdSc [1]
TrdrdSd [5]
TrdrdDd [5]
Tcke [8]
ProcODT [53.3 ohm]
Cmd2T [2T]
Gear Down Mode [Disabled]
Power Down Enable [Auto]
RttNom [Auto]
RttWr [Auto]
RttPark [Auto]
MemAddrCmdSetup [Auto]
MemCsOdtSetup [Auto]
MemCkeSetup [Auto]
MemCadBusClkDrvStren [Auto]
MemCadBusAddrCmdDrvStren [Auto]
MemCadBusCsOdtDrvStren [Auto]
MemCadBusCkeDrvStren [Auto]
VTTDDR AB Voltage [Auto]
VTTDDR CD Voltage [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
DRAM CTRL REF Voltage on CHC [Auto]
DRAM CTRL REF Voltage on CHD [Auto]
VPP DRAM AB [Auto]
VPP DRAM CD [Auto]
1.8V Standby Voltage [Auto]
CPU 3.3v AUX [Auto]
2.5V SB Voltage [Auto]
DRAM R1 Tune [Auto]
DRAM R2 Tune [Auto]
DRAM R3 Tune [Auto]
DRAM R4 Tune [Auto]
Sense MI Skew [Auto]
Sense MI Offset [Auto]
Clock Amplitude [Auto]
PLL Tune R1 [Auto]
PLL Tune R2 [Auto]
PCIE Tune R1 [Auto]
PCIE Tune R2 [Auto]
PCIE Tune R3 [Auto]
Ln2 Tune [Auto]
PLL Reference Voltage [Auto]
PLL Reference Voltage 2 [Auto]
Short Reset [Auto]
CLDO VDDP voltage [Auto]
CPU Load-line Calibration [Level 4]
CPU Current Capability [120%]
CPU VRM Switching Frequency [Auto]
VRM Spread Spectrum [Auto]
CPU Power Duty Control [T.Probe]
CPU Power Phase Control [Auto]
CPU Power Thermal Control [130]
VDDSOC Load-line Calibration [Level 2]
VDDSOC Current Capability [140%]
VDDSOC Switching Frequency [Auto]
VDDSOC Phase Control [Auto]
VDDSOC Power Thermal Control [120]
DRAM Current Capability(CHA, CHB) [130%]
DRAM Current Capability(CHC, CHD) [130%]
DRAM Power Phase Control(CHA, CHB) [Extreme]
DRAM Power Phase Control(CHC, CHD) [Extreme]
DRAM Switching Frequency(CHA, CHB) [Auto]
DRAM Switching Frequency(CHC, CHD) [Auto]
DRAM VBoot Voltage AB [1.40000]
DRAM VBoot Voltage CD [1.40000]
Security Device Support [Enable]
Security Device Support [Enable]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement Hierarchy [Enabled]
TPM2.0 UEFI Spec Version [TCG_2]
Physical Presence Spec Version [1.3]
TPM Device Selection [Discrete TPM]
Erase fTPM NV for factory reset [Enabled]
SATA Port Enable [Enabled]
PT Aggresive SATA Device Sleep Port 0 [Auto]
PT Aggresive SATA Device Sleep Port 1 [Auto]
PT XHCI GEN1 [Auto]
PT XHCI GEN2 [Auto]
PT USB Equalization4 [Auto]
PT USB Redriver [Auto]
U31G2_1 [Enabled]
USB3.1_2 [Enabled]
U31G1_9 [Enabled]
U31G1_10 [Enabled]
U31G1_11 [Enabled]
U31G1_12 [Enabled]
PT USB30 PORT4 [Enabled]
PT USB30 PORT5 [Enabled]
USB13 [Enabled]
USB14 [Enabled]
USB_3 [Enabled]
USB_5 [Enabled]
USB_6 [Enabled]
USB_4 [Enabled]
PT PCIE PORT 0 [Auto]
PT PCIE PORT 1 [Auto]
PT PCIE PORT 2 [Auto]
PT PCIE PORT 3 [Auto]
PT PCIE PORT 4 [Auto]
PT PCIE PORT 5 [Auto]
PT PCIE PORT 6 [Auto]
PT PCIE PORT 7 [Auto]
Onboard LED [Enabled]
SATA Port Enable [Enabled]
SATA Mode [AHCI]
SMART Self Test [Enabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
ErP Ready [Disabled]
Restore On AC Power Loss [Power Off]
Power On By PCI-E/PCI [Disabled]
Power On By RTC [Disabled]
HD Audio Controller [Disabled]
CPU PCIE Link Mode [Auto]
SB PCIE Link Mode [Auto]
PCIEX16_1 Bandwidth [X16 Mode]
PCIEX8_2 Bandwidth [X8 Mode]
PCIEX16_3 Bandwidth [X16 Mode]
PCIE_X8/X4_4 Bandwidth [X4 Mode]
Asmedia USB 3.1 Controller [Enabled]
USB Type C Power Switch for U31G2_1 [Auto]
USB Type C Power Switch for U31G2_EC1 [Auto]
When system is in working state [On]
When system is in sleep, hibernate or soft off states [On]
Intel LAN Controller [Enabled]
Intel LAN OPROM [Disabled]
Wi-Fi Controller [Disabled]
Bluetooth Controller [Disabled]
NX Mode [Enabled]
SVM Mode [Enabled]
Network Stack [Disabled]
Debug Port Table [Disabled]
Debug Port Table 2 [Disabled]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
UFD 2.0 Silicon-Power16G1100 [Auto]
U31G2_EC1 [Enabled]
U31G2_E2 [Enabled]
U31G2_1 [Enabled]
U31G1_1 [Enabled]
U31G1_2 [Enabled]
U31G1_3 [Enabled]
U31G1_4 [Enabled]
U31G1_5 [Enabled]
U31G1_6 [Enabled]
U31G1_7 [Enabled]
U31G1_8 [Enabled]
U31G1_9 [Enabled]
U31G1_10 [Enabled]
U31G1_11 [Enabled]
U31G1_12 [Enabled]
USB13 [Enabled]
USB14 [Enabled]
CPU Temperature [Monitor]
MotherBoard Temperature [Monitor]
VRM Temperature [Monitor]
PCH Temperature [Monitor]
T_Sensor1 Temperature [Monitor]
T_Sensor2 Temperature [Monitor]
DIMM.2 sensor1 Temperature [Monitor]
DIMM.2 sensor2 Temperature [Monitor]
EXT_Sensor1 Temperature [Monitor]
EXT_Sensor2 Temperature [Monitor]
EXT_Sensor3 Temperature [Monitor]
CPU Fan Speed [Monitor]
Chassis Fan 1 Speed [Monitor]
Chassis Fan 2 Speed [Monitor]
HAMP Fan Speed [Monitor]
W_PUMP+ Speed [Monitor]
CPU Optional Fan Speed [Monitor]
COV Fan Speed [Monitor]
Extension Fan 1 Speed [Monitor]
Extension Fan 2 Speed [Monitor]
Extension Fan 3 Speed [Monitor]
W FLOW1 Speed [Monitor]
Water In T Sensor Temperature [Monitor]
Water Out T Sensor Temperature [Monitor]
W FLOW2 Speed [Monitor]
WB In T Sensor Temperature [Monitor]
WB Out T Sensor Temperature [Monitor]
CPU Core Voltage [Monitor]
3.3V Voltage [Monitor]
5V Voltage [Monitor]
12V Voltage [Monitor]
CPU Q-Fan Control [PWM Mode]
CPU Fan Smoothing Up/Down Time [0 sec]
CPU Fan Speed Lower Limit [200 RPM]
CPU Fan Profile [Standard]
W_PUMP+ Control [Disabled]
COV Fan Q-Fan Control [DC Mode]
COV Fan Smoothing Up/Down Time [0 sec]
COV Fan Upper Temperature [95]
COV Fan Max. Duty Cycle (%) [100]
COV Fan Middle Temperature [90]
COV Fan Middle. Duty Cycle (%) [100]
COV Fan Lower Temperature [44]
COV Fan Min. Duty Cycle (%) [23]
Allow Fan Stop [Enabled]
Chassis Fan 1 Q-Fan Control [Auto]
Chassis Fan 1 Q-Fan Source [CPU]
Chassis Fan 1 Smoothing Up/Down Time [0 sec]
Chassis Fan 1 Speed Low Limit [200 RPM]
Chassis Fan 1 Profile [Standard]
Chassis Fan 2 Q-Fan Control [Auto]
Chassis Fan 2 Q-Fan Source [CPU]
Chassis Fan 2 Smoothing Up/Down Time [0 sec]
Chassis Fan 2 Speed Low Limit [200 RPM]
Chassis Fan 2 Profile [Standard]
HAMP Fan Q-Fan Control [Auto]
HAMP Fan Source [CPU]
HAMP Fan Smoothing Up/Down Time [0 sec]
HAMP Fan Speed Low Limit [200 RPM]
HAMP Fan Profile [Standard]
Extension Fan 1 Q-Fan Control [DC Mode]
Extension Fan 1 Q-Fan Source [CPU]
Extension Fan 1 Speed Low Limit [200 RPM]
Extension Fan 1 Profile [Standard]
Extension Fan 2 Q-Fan Control [DC Mode]
Extension Fan 2 Q-Fan Source [CPU]
Extension Fan 2 Speed Low Limit [200 RPM]
Extension Fan 2 Profile [Standard]
Extension Fan 3 Q-Fan Control [DC Mode]
Extension Fan 3 Q-Fan Source [CPU]
Extension Fan 3 Speed Low Limit [200 RPM]
Extension Fan 3 Profile [Standard]
OnChip SATA Channel [Enabled]
OnChip SATA Type [AHCI]
U31G1_1 [Enabled]
U31G1_2 [Enabled]
U31G1_3 [Enabled]
U31G1_4 [Enabled]
U31G1_5 [Enabled]
U31G1_6 [Enabled]
U31G1_7 [Enabled]
U31G1_8 [Enabled]
IR Config [Disabled]
SD Mode [Disabled]
SdForce18 Enable [Disabled]
SD Mode configuration [AMDA]
Uart 0 Enable [Disabled]
Uart 1 Enable [Disabled]
I2C 0 Enable [Disabled]
I2C 1 Enable [Disabled]
I2C 2 Enable [Disabled]
I2C 3 Enable [Disabled]
Restore On AC Power Loss [Power Off]
GPIO Devices Support [Disabled]
ESATA Port On Port 0 [Disabled]
ESATA Port On Port 1 [Disabled]
ESATA Port On Port 2 [Disabled]
ESATA Port On Port 3 [Disabled]
ESATA Port On Port 4 [Disabled]
ESATA Port On Port 5 [Disabled]
ESATA Port On Port 6 [Disabled]
ESATA Port On Port 7 [Disabled]
SATA Power On Port 0 [Enabled]
SATA Power On Port 1 [Enabled]
SATA Power On Port 2 [Enabled]
SATA Power On Port 3 [Enabled]
SATA Power On Port 4 [Enabled]
SATA Power On Port 5 [Enabled]
SATA Power On Port 6 [Enabled]
SATA Power On Port 7 [Enabled]
SATA Port 0 MODE [Auto]
SATA Port 1 MODE [Auto]
SATA Port 2 MODE [Auto]
SATA Port 3 MODE [Auto]
SATA Port 4 MODE [Auto]
SATA Port 5 MODE [Auto]
SATA Port 6 MODE [Auto]
SATA Port 7 MODE [Auto]
SATA Hot-Removabel Support [Disabled]
SATA 6 AHCI Support [Disabled]
Int. Clk Differential Spread [Disabled]
SATA MAXGEN2 CAP OPTION [Disabled]
SATA CLK Mode Option [INT 100MHz]
Aggressive Link PM Capability [Enabled]
Port Multiplier Capability [Enabled]
SATA Ports Auto Clock Control [Enabled]
SATA Partial State Capability [Enabled]
SATA FIS Based Switching [Enabled]
SATA Command Completion Coalescing Support [Disabled]
SATA Slumber State Capability [Enabled]
SATA MSI Capability Support [Disabled]
SATA Target Support 8 Devices [Disabled]
Generic Mode [Disabled]
SATA AHCI Enclosure [Disabled]
SATA SGPIO 0 [Disabled]
SATA SGPIO 1 [Disabled]
SATA PHY PLL [Disabled]
AC/DC Change Message Delivery [Disabled]
TimerTick Tracking [Enabled]
Clock Interrupt Tag [Enabled]
EHCI Traffic Handling [Disabled]
Fusion Message C Multi-Core [Disabled]
Fusion Message C State [Disabled]
SPI Auto Mode [Disabled]
SPI Read Mode [Default]
SPI 100MHz Support [Enabled]
SPI Normal Speed [33MHz]
SPI Fast Read Speed [Default]
SPI Burst Write [Disabled]
I2C 0 D3 Support [Enabled]
I2C 1 D3 Support [Enabled]
I2C 2 D3 Support [Enabled]
I2C 3 D3 Support [Enabled]
UART 0 D3 Support [Enabled]
UART 1 D3 Support [Enabled]
SATA D3 Support [Enabled]
EHCI D3 Support [Enabled]
XHCI D3 Support [Enabled]
SD D3 Support [Enabled]
S0I3 [Disabled]
Chipset Power Saving Features [Enabled]
SB Clock Spread Spectrum [Enabled]
SB Clock Spread Spectrum Option [-0.375%]
HPET In SB [Enabled]
MsiDis in HPET [Disabled]
_OSC For PCI0 [Enabled]
USB Phy Power Down [Disabled]
PCIB_CLK_Stop Override [0]
USB MSI Option [Disabled]
LPC MSI Option [Disabled]
PCIBridge MSI Option [Disabled]
AB MSI Option [Disabled]
SB C1E Support [Disabled]
SB Hardware Reduced Support [Disabled]
GPP Serial Debug Bus Enable [Disabled]
Fast Boot [Enabled]
Next Boot after AC Power Loss [Normal Boot]
Boot Logo Display [Auto]
POST Delay Time [3 sec]
Boot up NumLock State [Enabled]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Enabled]
Interrupt 19 Capture [Disabled]
Setup Mode [Advanced Mode]
Launch CSM [Disabled]
OS Type [Other OS]
Setup Animator [Disabled]
Load from Profile [1]
Profile Name [3066mhz stable]
Save to Profile [3]
CPU Core Voltage [Auto]
VDDSOC Voltage [Auto]
1.8V PLL Voltage [Auto]
BCLK Frequency [Auto]
CPU Ratio [Auto]
Bus Interface [PCIEX16_1]

I could absolutely not get 8 sticks stable at anything faster than 3066. Right now I'm just tweaking subsettings noted in this video: https://www.youtube.com/watch?v=urVJR_qh-2c&list=WL&index=8&t=1s. He's a funny guy but the info is awesome, I just made the first two changes to Trc and Trfc and am running MemTest86 now...

Hope that's helpful!

EDIT: it's easy to miss but also the VBOOT voltages need to be changed.
EDIT#2: I was able to run 4 sticks at 3333mhz with Stilt's fast profile with 1.4v VDIMM and 1.43 VBOOT voltages. I'm not sure if you have 4 or 8 sticks.


Thanks my friend!! I have 4x8GB sticks what i ordered. I really appreciate it!! hope that gets me up and running. I was debating on buying the 16GB ones but I'd never need the full 128GB between the 8 slots so i just went with the 8GB ones. Max i will ever need is 64GB.

You think 1.415V for that RAM is fine? I've never put it over 1.35
Edited by Ivanov88 - 10/19/17 at 5:37pm
post #1290 of 1719
Ivanov, you can try what I tried and just keep bumping and testing the memory until it becomes stable. 1.4 - 1.415 was my sweet spot. Check the inline spreadsheet here for a good range of what people are running:

http://www.overclock.net/t/1628751/official-amd-ryzen-ddr4-24-7-memory-stability-thread
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › ASUS ROG Zenith Extreme X399 ThreadRipper Overclocking / Support