Overclock.net › Forums › AMD › AMD Motherboards › ASUS ROG Zenith Extreme X399 ThreadRipper Overclocking / Support
New Posts  All Forums:Forum Nav:

ASUS ROG Zenith Extreme X399 ThreadRipper Overclocking / Support - Page 64

post #631 of 1761
Thread Starter 
Quote:
Originally Posted by Reikoji View Post

Hmmmmm would it help if the fan behind the I/O was actually spinning . . . ?

I set COV Fan to turn on at 65°C, as it's a bit whiny redface.gif .

In the SmallFFT 3.9GHz 1.3V it is running, see HWINFO screenshot. On the stock CPU but 3466MHz RAM setup, SmallFFT run it is not running.
Quote:
Originally Posted by Reikoji View Post

At stock, 15m of realbench put VRM to 56c

That is appropriate IMO.

Concerning was when you said:-
Quote:
Originally Posted by Reikoji View Post

Warning: Spoiler! (Click to show)


(/ .□.)\ ┻━┻~ ヽ(`Д´)ノ~┻━┻ /(.□. \)


This is my 1800x all over again, but with better cooling and correct memory timings. Passes 15m real bench no errors again redface.gif. 78c vrms tho hmm.

RB 3.9GHz 1.3V 3466MHz

The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
post #632 of 1761
Quote:
Originally Posted by gupsterg View Post

I set COV Fan to turn on at 65°C, as it's a bit whiny redface.gif .

In the SmallFFT 3.9GHz 1.3V it is running, see HWINFO screenshot. On the stock CPU but 3466MHz RAM setup, SmallFFT run it is not running.
That is appropriate IMO.

Concerning was when you said:-
RB 3.9GHz 1.3V 3466MHz


Probably from not having an active airflow going over it. Open air case weaknesses i suppose
post #633 of 1761
Thread Starter 
Guess so.

Dark Base 900 was pants with stock door closed. Without the complete front panel mesh mod it would have been unacceptable for usage IMO. I was seeing a delta on water of ~18+°C from room temp redface.gif .

I may still mod top panel.

Cooling TR really require hefty WC and good airflow to key components on mobo, like VRM.

I may at some point remove shield over VRM HS and go for a bigger fan there.

Currently using AS5 TIM on CPU. May try Thermal Grizzly.
Edited by gupsterg - 9/23/17 at 5:47am
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
post #634 of 1761
Quote:
Originally Posted by gupsterg View Post

Guess so.

Dark Base 900 was pants with stock door closed. Without the complete front panel mesh mod it would have been unacceptable for usage IMO. I was seeing a delta on water of ~18+°C from room temp redface.gif .

I may still mod top panel.

Cooling TR really require hefty WC and good airflow to key components on mobo, like VRM.

I may at some point remove shield over VRM HS and go for a bigger fan there.

Currently using AS5 TIM on CPU. May try Thermal Grizzly.

my mobo supringly stays 30c. pch got to 50ish c. my ec loop has 480mm extreme rad with delta fans.

where is the control for the cover fan? gotta install aisuite?
Edited by Reikoji - 9/23/17 at 6:15am
post #635 of 1761
Thread Starter 
Side panel off I see mobo/PCH temps similar to that when rig under load. Otherwise a few degrees higher. The front rad has fans on outer side to push air in. I plan to add some on inside, it will aid airflow through case IMO plus some what aid cooling capacity on front rad.

Not using AiSuite or Ryzen Master. Usually I avoid SW like that. I'm setting up profile for VRM fan in UEFI. Monitor page, sub menu Chassis Fan configuration IIRC. By default it has stop enabled, so you won't see it in HWiNFO until it comes on.
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
post #636 of 1761
Quote:
Originally Posted by gupsterg View Post

17360365589 is serial. First two digits is production year, 17 in your case. Second two digits is production week, 36 in your case. In each kit you will notice consecutive numbers like you have (87, 88, 89 and 90).

My serial is longer. 1712A500xxxxxxx , I have F4-3200C14D-16GTZ. The A500 is to denote Samsung IC, IIRC A400 is Hynix. Besides the serial showing timings can be guide to which IC there maybe.

F4-3200C16Q-32GTZR has 16-18-18-38, which is more than likely Hynix. A kit where the first three primary timings are the same, is likely to be Samsung, for example 14-14-14-34.

Thanks for the reply Gupsterg, I was thinking from the start that they would be Hynix and I really don't care if they are I only hope they run at 3200 MHz on the setup, but I was curious about the different barcodes... mines are different both in the box and the sticker on the rams. but who knows probably is just a new coding that they are using, anyway when the build is done I would post what kind of chip these ones have.

Also, I got the Be Quiet! DB 900 Pro sitting here waiting for the other items, it would be interesting on comparing temps, what thermal paste did you use on your build with TR? I have always use AS5 because is the only one from that I can get in my country, well the only one that is good, I have seen some Thermaltake and some Coolermaster but AS5 have always deliver good results and been durable in my personal setups (clean and change every year or so). I was considering getting the Thermal Grizzly kryonaut.

I will use a Kraken X62 for now, maybe in the future, I will jump on the custom loop train, but I don't have any experience with full custom loops and I need further reading on what build fit on the case and maintain a low level of noise while idle or light to moderate use also I don't want to be draining the whole system too often to clean it.

EDITED: I just read that you are using AS5, let us know how the Thermal Grizzly works.
Edited by Turok916 - 9/23/17 at 9:58am
post #637 of 1761
CPU temp is fine with 603 on my Zenith now, the RGB stoped working, had to flash aura to get it working again, not sure which version my aura firmware was before, but its working with 1.00.13.
post #638 of 1761

In preparation of my build I am downloading the latest BIOS and drivers etc, however I cannot seem to see the AI Suite download, only the Aura + Live OLED Dash utility. 

 

Am I being dense lol ? 

 

EDIT. Ignore me, I found links in the OP

post #639 of 1761
Hey guys i am new here and wanted to say hi. I am about to grab Bios 0603. I am currently on 0503 and still having major memory issues. This is my first time taking a bios from anywhere other than ASUS website. Just wanted to make sure that 0603 is good? and that it also includes everything before it just like on asus website where you just want to get the latest? Thanks in advance.



never mind i gave it a shot and it worked. So much info in this site, great resource
Edited by Jazzfan1 - 9/23/17 at 12:10pm
post #640 of 1761
FYI, I just noticed this in my facebook feed, that you can get a free copy of an AAA game if you purchased your board from one of the partner dealers:
https://www.asus-promotion.eu/x399/

My swedish dealer (inet.se) is listed as a partner so I just sent my info (using the link for people without a promo code) and will claim a copy of Farcry 5 if the copy of my invoice is accepted :-)
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › ASUS ROG Zenith Extreme X399 ThreadRipper Overclocking / Support