post #1 of 1
Thread Starter 
i have a usb 3.0 card installed on a usb 2.0 motherboard so i have front usb ports on the case which are 3.0 so i needed a way to plug in the 20 pin header, hence the add in card. i can use the ports on the card and the front of the case for anything but booting. is this a driver issue or can you not boot from a pci-e add in card? i can boot from usb drive on the ports on the rear of the motherboard.
Edited by ried16 - 9/24/17 at 10:54am