Overclock.net › Forums › Intel › Intel CPUs › Need some opinions on what to do here.
New Posts  All Forums:Forum Nav:

Need some opinions on what to do here.

post #1 of 10
Thread Starter 
I have just built the system in my sig and I am getting horrible temps. I started out with a Hyper evo 212 and figured that was the culprit, then i changed to the Captain 240 ex and there is no change in my temps. This thing can get all the way to 88c under full load and that scares me. Is there anything I can do to make my temps better? I have the rad in push pull with all PWM fans that I have controlled by my board. I have been tempted to delid but I was hoping there was something I am missing to make this thing get cooler before I go to that extreme. Also I am using Noctua thermal paste so that shouldn't be the issue. I am sorry if this has been posted before.

Thanks.
post #2 of 10
How much paste have you been using? How have you been applying it? Also, do not let the chip get that hot again.
Primary
(18 items)
 
Secondary
(9 items)
 
Tertiary
(10 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 ASUS Pro x370 Prime Gigabyte Windforce 1070 GSkill 3000MH C15 1.35V 
Hard DriveHard DriveHard DriveOptical Drive
Seagate 1TB (ST1000DM003 9YN162) Seagate 2TB (ST2000DM001 1CH164 Trion 150 960GB Some LG Blu-Ray 
CoolingOSMonitorMonitor
Noctua D14 Windows 7 Profession 64bit Acer V246HL Acer G245HQ 
MonitorKeyboardPowerCase
ASUS MX25AQ Logitec G710+ Rosewill Capstone 450W Cooler Master Haf XB EVO 
MouseMouse Pad
Roccat Lua My table 
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS Sabertooth 990FX EVGA 560TI ADATA 4x2GB 1600C9 1.65V-1.5V 
Hard DriveCoolingOSPower
Some 2.5in 1TB drive Stock Windows 7 Home Premium 64bit Corsair TX850 
Case
Cooler Master HAF 
CPUMotherboardRAMOptical Drive
i7-960 Gigabyte X58 ADATA 2x2GB 1600C9 1.65V-1.5V Generic DVD 
CoolingOSMonitorKeyboard
Asetek 510LC Linux with pfSense in VM Some generic 1280x1024 Generic 
CaseMouse
Corsair Carbide 400R Generic 
  hide details  
Reply
Primary
(18 items)
 
Secondary
(9 items)
 
Tertiary
(10 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 ASUS Pro x370 Prime Gigabyte Windforce 1070 GSkill 3000MH C15 1.35V 
Hard DriveHard DriveHard DriveOptical Drive
Seagate 1TB (ST1000DM003 9YN162) Seagate 2TB (ST2000DM001 1CH164 Trion 150 960GB Some LG Blu-Ray 
CoolingOSMonitorMonitor
Noctua D14 Windows 7 Profession 64bit Acer V246HL Acer G245HQ 
MonitorKeyboardPowerCase
ASUS MX25AQ Logitec G710+ Rosewill Capstone 450W Cooler Master Haf XB EVO 
MouseMouse Pad
Roccat Lua My table 
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS Sabertooth 990FX EVGA 560TI ADATA 4x2GB 1600C9 1.65V-1.5V 
Hard DriveCoolingOSPower
Some 2.5in 1TB drive Stock Windows 7 Home Premium 64bit Corsair TX850 
Case
Cooler Master HAF 
CPUMotherboardRAMOptical Drive
i7-960 Gigabyte X58 ADATA 2x2GB 1600C9 1.65V-1.5V Generic DVD 
CoolingOSMonitorKeyboard
Asetek 510LC Linux with pfSense in VM Some generic 1280x1024 Generic 
CaseMouse
Corsair Carbide 400R Generic 
  hide details  
Reply
post #3 of 10
Thread Starter 
I just apply a small dab in the center and let the processor spread it. Maybe the size of a grain of rice.
post #4 of 10
How are the fans in your case? Got any on intake? Is your AIO on exhaust or intake? Are the fans spinning up? Is the AIO connected to the PSU properly?
Sorry for the basic questions, just making sure we get the easy stuff out of the way.
Primary
(18 items)
 
Secondary
(9 items)
 
Tertiary
(10 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 ASUS Pro x370 Prime Gigabyte Windforce 1070 GSkill 3000MH C15 1.35V 
Hard DriveHard DriveHard DriveOptical Drive
Seagate 1TB (ST1000DM003 9YN162) Seagate 2TB (ST2000DM001 1CH164 Trion 150 960GB Some LG Blu-Ray 
CoolingOSMonitorMonitor
Noctua D14 Windows 7 Profession 64bit Acer V246HL Acer G245HQ 
MonitorKeyboardPowerCase
ASUS MX25AQ Logitec G710+ Rosewill Capstone 450W Cooler Master Haf XB EVO 
MouseMouse Pad
Roccat Lua My table 
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS Sabertooth 990FX EVGA 560TI ADATA 4x2GB 1600C9 1.65V-1.5V 
Hard DriveCoolingOSPower
Some 2.5in 1TB drive Stock Windows 7 Home Premium 64bit Corsair TX850 
Case
Cooler Master HAF 
CPUMotherboardRAMOptical Drive
i7-960 Gigabyte X58 ADATA 2x2GB 1600C9 1.65V-1.5V Generic DVD 
CoolingOSMonitorKeyboard
Asetek 510LC Linux with pfSense in VM Some generic 1280x1024 Generic 
CaseMouse
Corsair Carbide 400R Generic 
  hide details  
Reply
Primary
(18 items)
 
Secondary
(9 items)
 
Tertiary
(10 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 ASUS Pro x370 Prime Gigabyte Windforce 1070 GSkill 3000MH C15 1.35V 
Hard DriveHard DriveHard DriveOptical Drive
Seagate 1TB (ST1000DM003 9YN162) Seagate 2TB (ST2000DM001 1CH164 Trion 150 960GB Some LG Blu-Ray 
CoolingOSMonitorMonitor
Noctua D14 Windows 7 Profession 64bit Acer V246HL Acer G245HQ 
MonitorKeyboardPowerCase
ASUS MX25AQ Logitec G710+ Rosewill Capstone 450W Cooler Master Haf XB EVO 
MouseMouse Pad
Roccat Lua My table 
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS Sabertooth 990FX EVGA 560TI ADATA 4x2GB 1600C9 1.65V-1.5V 
Hard DriveCoolingOSPower
Some 2.5in 1TB drive Stock Windows 7 Home Premium 64bit Corsair TX850 
Case
Cooler Master HAF 
CPUMotherboardRAMOptical Drive
i7-960 Gigabyte X58 ADATA 2x2GB 1600C9 1.65V-1.5V Generic DVD 
CoolingOSMonitorKeyboard
Asetek 510LC Linux with pfSense in VM Some generic 1280x1024 Generic 
CaseMouse
Corsair Carbide 400R Generic 
  hide details  
Reply
post #5 of 10
Thread Starter 
Quote:
Originally Posted by AcEsSalvation View Post

How are the fans in your case? Got any on intake? Is your AIO on exhaust or intake? Are the fans spinning up? Is the AIO connected to the PSU properly?
Sorry for the basic questions, just making sure we get the easy stuff out of the way.

The only way to mount the AIO was in the front as intake. The fans spin up fine when it gets warm. The pump is hooked to the AIO pump header on the board and the fans are hooked to a splitter and then to the CPU fan 1 on the board
post #6 of 10
And I'm guessing the rear fan is on exhaust? That is actually how I ended up changing my rig around while I was still using my H100. I'd rather have more intake and let the GPU sit a little warmer in the case than have only one fan on intake.

My only guess as of right now is the 212 wasn't sufficient for the 8350 7700kderp and now there might be something with the AIO...
Are you overclocked right now?
Edited by AcEsSalvation - 10/19/17 at 8:30pm
Primary
(18 items)
 
Secondary
(9 items)
 
Tertiary
(10 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 ASUS Pro x370 Prime Gigabyte Windforce 1070 GSkill 3000MH C15 1.35V 
Hard DriveHard DriveHard DriveOptical Drive
Seagate 1TB (ST1000DM003 9YN162) Seagate 2TB (ST2000DM001 1CH164 Trion 150 960GB Some LG Blu-Ray 
CoolingOSMonitorMonitor
Noctua D14 Windows 7 Profession 64bit Acer V246HL Acer G245HQ 
MonitorKeyboardPowerCase
ASUS MX25AQ Logitec G710+ Rosewill Capstone 450W Cooler Master Haf XB EVO 
MouseMouse Pad
Roccat Lua My table 
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS Sabertooth 990FX EVGA 560TI ADATA 4x2GB 1600C9 1.65V-1.5V 
Hard DriveCoolingOSPower
Some 2.5in 1TB drive Stock Windows 7 Home Premium 64bit Corsair TX850 
Case
Cooler Master HAF 
CPUMotherboardRAMOptical Drive
i7-960 Gigabyte X58 ADATA 2x2GB 1600C9 1.65V-1.5V Generic DVD 
CoolingOSMonitorKeyboard
Asetek 510LC Linux with pfSense in VM Some generic 1280x1024 Generic 
CaseMouse
Corsair Carbide 400R Generic 
  hide details  
Reply
Primary
(18 items)
 
Secondary
(9 items)
 
Tertiary
(10 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 ASUS Pro x370 Prime Gigabyte Windforce 1070 GSkill 3000MH C15 1.35V 
Hard DriveHard DriveHard DriveOptical Drive
Seagate 1TB (ST1000DM003 9YN162) Seagate 2TB (ST2000DM001 1CH164 Trion 150 960GB Some LG Blu-Ray 
CoolingOSMonitorMonitor
Noctua D14 Windows 7 Profession 64bit Acer V246HL Acer G245HQ 
MonitorKeyboardPowerCase
ASUS MX25AQ Logitec G710+ Rosewill Capstone 450W Cooler Master Haf XB EVO 
MouseMouse Pad
Roccat Lua My table 
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS Sabertooth 990FX EVGA 560TI ADATA 4x2GB 1600C9 1.65V-1.5V 
Hard DriveCoolingOSPower
Some 2.5in 1TB drive Stock Windows 7 Home Premium 64bit Corsair TX850 
Case
Cooler Master HAF 
CPUMotherboardRAMOptical Drive
i7-960 Gigabyte X58 ADATA 2x2GB 1600C9 1.65V-1.5V Generic DVD 
CoolingOSMonitorKeyboard
Asetek 510LC Linux with pfSense in VM Some generic 1280x1024 Generic 
CaseMouse
Corsair Carbide 400R Generic 
  hide details  
Reply
post #7 of 10
Thread Starter 
Quote:
Originally Posted by AcEsSalvation View Post

And I'm guessing the rear fan is on exhaust? That is actually how I ended up changing my rig around while I was still using my H100. I'd rather have more intake and let the GPU sit a little warmer in the case than have only one fan on intake.

My only guess as of right now is the 212 wasn't sufficient for the 8350 and now there might be something with the AIO...
Are you overclocked right now?

I dont have the 8350 I have a 7700k is my sig not showing the correct info?

Also i have the rear as exhaust and two top exhaust fans.
post #8 of 10
doh.gif
Too many threads, I'm so sorry!

I wonder fi you would see a difference having that rear fan on intake. I'd expect it to be miniscule.
I think I need a break to think before I start trying to give you advice on your i5-4130
Edited by AcEsSalvation - 10/19/17 at 8:31pm
Primary
(18 items)
 
Secondary
(9 items)
 
Tertiary
(10 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 ASUS Pro x370 Prime Gigabyte Windforce 1070 GSkill 3000MH C15 1.35V 
Hard DriveHard DriveHard DriveOptical Drive
Seagate 1TB (ST1000DM003 9YN162) Seagate 2TB (ST2000DM001 1CH164 Trion 150 960GB Some LG Blu-Ray 
CoolingOSMonitorMonitor
Noctua D14 Windows 7 Profession 64bit Acer V246HL Acer G245HQ 
MonitorKeyboardPowerCase
ASUS MX25AQ Logitec G710+ Rosewill Capstone 450W Cooler Master Haf XB EVO 
MouseMouse Pad
Roccat Lua My table 
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS Sabertooth 990FX EVGA 560TI ADATA 4x2GB 1600C9 1.65V-1.5V 
Hard DriveCoolingOSPower
Some 2.5in 1TB drive Stock Windows 7 Home Premium 64bit Corsair TX850 
Case
Cooler Master HAF 
CPUMotherboardRAMOptical Drive
i7-960 Gigabyte X58 ADATA 2x2GB 1600C9 1.65V-1.5V Generic DVD 
CoolingOSMonitorKeyboard
Asetek 510LC Linux with pfSense in VM Some generic 1280x1024 Generic 
CaseMouse
Corsair Carbide 400R Generic 
  hide details  
Reply
Primary
(18 items)
 
Secondary
(9 items)
 
Tertiary
(10 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 ASUS Pro x370 Prime Gigabyte Windforce 1070 GSkill 3000MH C15 1.35V 
Hard DriveHard DriveHard DriveOptical Drive
Seagate 1TB (ST1000DM003 9YN162) Seagate 2TB (ST2000DM001 1CH164 Trion 150 960GB Some LG Blu-Ray 
CoolingOSMonitorMonitor
Noctua D14 Windows 7 Profession 64bit Acer V246HL Acer G245HQ 
MonitorKeyboardPowerCase
ASUS MX25AQ Logitec G710+ Rosewill Capstone 450W Cooler Master Haf XB EVO 
MouseMouse Pad
Roccat Lua My table 
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS Sabertooth 990FX EVGA 560TI ADATA 4x2GB 1600C9 1.65V-1.5V 
Hard DriveCoolingOSPower
Some 2.5in 1TB drive Stock Windows 7 Home Premium 64bit Corsair TX850 
Case
Cooler Master HAF 
CPUMotherboardRAMOptical Drive
i7-960 Gigabyte X58 ADATA 2x2GB 1600C9 1.65V-1.5V Generic DVD 
CoolingOSMonitorKeyboard
Asetek 510LC Linux with pfSense in VM Some generic 1280x1024 Generic 
CaseMouse
Corsair Carbide 400R Generic 
  hide details  
Reply
post #9 of 10
Thread Starter 
Do you think deliding is the answer here?
post #10 of 10
Quote:
Originally Posted by jonathonparker View Post

Do you think deliding is the answer here?

 

Well those are some pretty high temps even before a delid. I would check and see what voltages your cpu is running at. There also should be some kind of PWM fan calibrator in the bios if all your fans are PWM.


Edited by ozlay - 10/23/17 at 7:38am
Silvia
(7 items)
 
Red Queen
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel I5-7600k Asrock Z270M Extreme 4 GTX 1060 Galax HOF 
Hard DriveOSCase
Samsung 850 pro windows 10 pro enthoo evolv matx tempered glass 
  hide details  
Reply
Silvia
(7 items)
 
Red Queen
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel I5-7600k Asrock Z270M Extreme 4 GTX 1060 Galax HOF 
Hard DriveOSCase
Samsung 850 pro windows 10 pro enthoo evolv matx tempered glass 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Need some opinions on what to do here.