Some interesting posts:
What is a single error? Influence of СLDO_VDDP on MEMCLK "holes"
Effect of temperature and higher voltage on memory stability
Effect of the CPU frequency on the stability of the RAM
Great gratitude STaRDoGG , slafniy , ajc9988 and A_z_z_y for help !
This program is publicly available for publication in news resources and preparation of reviews. The copyright to the logic of the program and the product is present.
Tried it with my 4*16Gb of f4-3200c14 16gtz, able to boot but memtest found error really fast so i'll try later to meddle with the timmings more. Currently going to work for the next 36 hrs ;'(.
Tested timings from V2 as i see V3 gives same numbers.
500% give or take 1 hour Y-Cruncher and loads LOADS of IBT runs.
With those timings my system Scores more. Its more responsive at lower volts !!! dont think i can get anything more from this motherboard cpu and ddr combo lol
Is it ok to link this topic on forums ?? Deffo out of alpha stage even passed beta stage !!!
Tested timings from V2 as i see V3 gives same numbers.
500% give or take 1 hour Y-Cruncher and loads LOADS of IBT runs.
With those timings my system Scores more. Its more responsive at lower volts !!! dont think i can get anything more from this motherboard cpu and ddr combo lol
Is it ok to link this topic on forums ?? Deffo out of alpha stage even passed beta stage !!!
I already went ahead and linked it, but as far it being out of any stage.... ehh? I mean thats up to 1usmus to decided if he feels its truly ready for the limelight and well... some sort of additional calc variable for blk offset would be nice.
No idea how hard it would be or if it even matters, I'm ganna end up seeing if I get any sort of different results with gear down disabled now that memory is completely strapped or if a looser tRC or using tRFC ult instead does me any favors in that regard.
if have Asus aura or a similar program that accesses the spd bus running and active while attempting to read the spd of a ram stick in typhoon burner you can potentially corrupt it
Tested timings from V2 as i see V3 gives same numbers.
500% give or take 1 hour Y-Cruncher and loads LOADS of IBT runs.
With those timings my system Scores more. Its more responsive at lower volts !!! dont think i can get anything more from this motherboard cpu and ddr combo lol
Is it ok to link this topic on forums ??
Deffo out of alpha stage even passed beta stage !!!
Don't think it's ready yet to go out of Beta stage
Still some non-functioning features in it
Plus... usmus is still working on finetuning the calculation(s) of certain timings (i asume)
I think at the current stage the program has a beta stage, the main functions work but you still need to work on the balance, the nuances turned out to be much more than just using the formula for calculations
the difference between 0.9.9 2 and 0.9.9 3 in optimizing the download speed, the changed interface and instructions
Quote:
Originally Posted by ku4eto
You need to mention, people need to be REAL careful with the Taiphoon Burner. Or they may brick their RAM sticks.
Tried it with my 4*16Gb of f4-3200c14 16gtz, able to boot but memtest found error really fast so i'll try later to meddle with the timmings more. Currently going to work for the next 36 hrs ;'(.
For my kit, RGB GSkill 3600C16 2x8Gb, I can use TheStilt fast timings for 3200 Mhz profile with the 3466 speed.
I've tweaked also some timings (tRRDS from 6 to 4; tFAW from 36 to 24; tWRWR SD and DD from 7 to 5; and tRDRD SD and DD from 5 to 3 and last tCKE from 9 to 1) a bit strictly and the system is benchable and playable (I think to be rock stable I've to play also with other settings as CLDO_VDDP and VDDP)
Due my low knowledge, when possible, I prefer to leave the settings on auto.
One of the most important thing (for my experience on this platform) to boot in my case are also the BGS and GDM settings.
The settings proposed in that fields are really a no go for me.
For my kit, RGB GSkill 3600C16 2x8Gb, I can use TheStilt fast timings for 3200 Mhz profile with the 3466 speed.
I've tweaked also some timings (tRRDS from 6 to 4; tFAW from 36 to 24; tWRWR SD and DD from 7 to 5; and tRDRD SD and DD from 5 to 3 and last tCKE from 9 to 1) a bit strictly and the system is benchable and playable (I think to be rock stable I've to play also with other settings as CLDO_VDDP and VDDP)
Due my low knowledge, when possible, I prefer to leave the settings on auto.
One of the most important thing (for my experience on this platform) to boot in my case are also the BGS and GDM settings.
The settings proposed in that fields are really a no go for me.
thanks ,some understated timings are responsible for recharging banks and read / write commands in one / different banks, you cut them, the speed of this action will not increase unfortunately, but the system will lose stability.You tested the system with a test of HСI 16 X 750 mb ?
thanks ,some understated timings are responsible for recharging banks and read / write commands in one / different banks, you cut them, the speed of this action will not increase unfortunately, but the system will lose stability.You tested the system with a test of HСI 16 X 750 mb ?
If you put wrong timings - like too low, not correct formula, you may not ever boot again with that stick. Esp if you touch the lowest frequency strap (2133Mhz or whatever is for DDR4). Otherwise, if you crap out only the highest frequency, you can always just reset CMOS and run at lower speed into Windows and edit back with Typhoon.
Quote:
For BGS and GDM i noted that are wrong in calculator for my kit, both! and if I change GDM from "auto" to "Disabled" is a no go (no boot) and BGS -one of the two- are to be active to boot, as suggested is a no boot.
For BGS and GDM i noted that are wrong in calculator for my kit, both! and if I change GDM from "auto" to "Disabled" is a no go (no boot) and BGS -one of the two- are to be active to boot, as suggested is a no boot.
impressive! you have a very high-quality copy of the processor and memory
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ask a question
Ask a question
Overclock.net
27.8M posts
541.2K members
Since 2004
A forum community dedicated to overclocking enthusiasts and testing the limits of computing. Come join the discussion about computing, builds, collections, displays, models, styles, scales, specifications, reviews, accessories, classifieds, and more!