Hi
This is my first overclock since my 2500k a few years back lol, so I am a little unfamiliar with the settings. I have a stable O/C @ x45 multi, blck @ 100.70 giving me about 4530Mhz.
System:
Asus 170k motherboard, 6600k, 2x8g DDR4 Cosair Value 2133@ 2283Mhz air cooled for now, 360 EKWB custom loop to be fitted next week. EVGA 1080 SC
Vcore is set @ 1.35 but in CPUZ shows as 1.312 under load, stable an no issues.
My problem is that I have missed a setting and the system runs continuously @ 4.5 Ghz and does not slow off load, as such the Vcore stays at 1.312v
What did I miss in the settings? C States are enabled etc Any help would be greatly appreciated as this is the last step to finishing an otherwise nice O/C
This is my first overclock since my 2500k a few years back lol, so I am a little unfamiliar with the settings. I have a stable O/C @ x45 multi, blck @ 100.70 giving me about 4530Mhz.
System:
Asus 170k motherboard, 6600k, 2x8g DDR4 Cosair Value 2133@ 2283Mhz air cooled for now, 360 EKWB custom loop to be fitted next week. EVGA 1080 SC
Vcore is set @ 1.35 but in CPUZ shows as 1.312 under load, stable an no issues.
My problem is that I have missed a setting and the system runs continuously @ 4.5 Ghz and does not slow off load, as such the Vcore stays at 1.312v
What did I miss in the settings? C States are enabled etc Any help would be greatly appreciated as this is the last step to finishing an otherwise nice O/C