Overclock.net banner

December 2017 Foldathon: Monday 18th - Wednesday 20th - 1200 ET/1600 UTC

5K views 152 replies 27 participants last post by  mmonnin 
#1 ·
Photo 12 of 12


----> SIGN UP HERE <----

Notice: You are now required to sign up each month, be sure to sign up for this month's event and each event going forward

What is the Foldathon?

Every month we hold a Foldathon, or FAT for short. The FAT is a mad dash over a 2 day period where we fold on as much hardware as we can get our grubby fingers on and try to amass the most points possible. It is winner takes all. Okay, that's not true, but if you're lucky you might win something, probably not, but you will have made a honorable contribution to the science behind Folding@Home. What is that science you're probably asking, have a gander over here to learn more. All units crunched for team 37726 count, even if you can only manage to complete one unit, but if you're already a folder, there's no excuse for not folding for the full 48 hours
:wubsmiley


How it works:

Sign-up and run Folding@home for Overclock.net (team number: 37726) during the specified times. Those who Fold will be entered into a drawing to win the prizes listed below. If you still don't know what Folding@home is or need some help getting started, feel free to post here, make a thread in the Overclock.net Folding@Home Team forum or check this guide: FAHControl v7 for both CPU and GPU

SIGN UP HERE

You can verify whether or not you're signed up by looking for your name here in the member list.

If you don't submit any points during a Foldathon, you will be removed from the list, this is to push for active participation in the event.

You are required to re-sign up each month for the prize option, this is to hopefully push a little more active participation in the event as well and prevent prizes going to people who aren't active in the community.

When:

12:00EST / 16:00UTC Monday December 18th - 12:00EST / 16:00UTC Wednesday December 20th 2017

Countdown to start

Reminders:

If you would like to be put on a reminder list for all future Foldathons, please join this group: Foldathon Participants

Prize Winners:

OCN Donated PayPal:

*on hold*

Member donated:

- TBD

If you wish to donate a prize, shoot @lanofsong ,@Simmons572 or @axipher a PM

Prizes will be drawn on or around the following Monday after the event.

After accepting a prize in any given monthly folding event, members will sit out two events before becoming eligible for prizes again. This is to hopefully spread the kindly donated items amongst the OCN folding community more fairly.

Stats:

http://folding.axihub.ca/foldathon.php

http://folding.axihub.ca/foldathonteam.php

Points from this Foldathon: XXX,XXX,XXX from XXX folders

Click here for a full list of folders

Points (First Goal 150,000,000/Second Goal 180,000,000)

Foldathon Points


Foldathon Points 2


Active Folders (Goal 125)

OCN Active Folders
 
See less See more
5
#4 ·
Yay for thread!

Also, awwwww no more hedgehog av axipher?
 
#5 ·
Quote:
Originally Posted by bigblock990 View Post

First!
Techincally I'm first, but nice try, A+ for effort.

Quote:
Originally Posted by mmonnin View Post

Signed up.
Just don't forget to fold like I sometimes do :S

Quote:
Originally Posted by WhiteWulfe View Post

Yay for thread!

Also, awwwww no more hedgehog av axipher?
It was time, still need to decide on the next pet, but Tyrone will live in under my username though.
 
#6 ·
Quote:
Originally Posted by axipher View Post

Techincally I'm first, but nice try, A+ for effort.

Just don't forget to fold like I sometimes do :S

It was time, still need to decide on the next pet, but Tyrone will live in under my username though.
In TC so if anything I forget to sign-up.
rolleyes.gif
 
#7 ·
in

 
#12 ·
Still waiting on the waterblock so the 1080ti's are still mothballed
sad-smiley-002.gif
 
#13 ·
Quote:
Originally Posted by mmonnin View Post

Passkey? is that an instantaneous PPD from FAHControl? Post a SS/log.
Where do i get the passkey?

*********************** Log Started 2017-12-11T13:45:10Z ***********************
13:45:10:************************* Folding@home Client *************************
13:45:10: Website: http://folding.stanford.edu/
13:45:10: Copyright: (c) 2009-2014 Stanford University
13:45:10: Author: Joseph Coffland
13:45:10: Args: --open-web-control
13:45:10: Config: C:/ProgramData/FAHClient/config.xml
13:45:10:******************************** Build ********************************
13:45:10: Version: 7.4.4
13:45:10: Date: Mar 4 2014
13:45:10: Time: 20:26:54
13:45:10: SVN Rev: 4130
13:45:10: Branch: fah/trunk/client
13:45:10: Compiler: Intel(R) C++ MSVC 1500 mode 1200
13:45:10: Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
13:45:10: /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
13:45:10: Platform: win32 XP
13:45:10: Bits: 32
13:45:10: Mode: Release
13:45:10:******************************* System ********************************
13:45:10: CPU: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
13:45:10: CPU ID: GenuineIntel Family 6 Model 60 Stepping 3
13:45:10: CPUs: 8
13:45:10: Memory: 11.94GiB
13:45:10: Free Memory: 8.30GiB
13:45:10: Threads: WINDOWS_THREADS
13:45:10: OS Version: 6.2
13:45:10: Has Battery: false
13:45:10: On Battery: false
13:45:10: UTC Offset: -8
13:45:10: PID: 8384
13:45:10: CWD: C:/ProgramData/FAHClient
13:45:10: OS: Windows 10 Home
13:45:10: OS Arch: AMD64
13:45:10: GPUs: 1
13:45:10: GPU 0: ATI:5 Fiji XT [Radeon R9 Fury X]
13:45:10: CUDA: Not detected
13:45:10:Win32 Service: false
13:45:10:***********************************************************************
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:Trying to access database...
13:45:10:Successfully acquired database lock
13:45:10:Enabled folding slot 00: PAUSED cpu:7 (by user)
13:45:10:Enabled folding slot 01: PAUSED gpu:0:Fiji XT [Radeon R9 Fury X] (by user)
13:45:10:WARNING:WU01:FS01:past final deadline 2017-12-10T21:09:38Z, dumping
13:45:10:WU01:FS01:Cleaning up
13:45:13:12:127.0.0.1:New Web connection
13:48:02:FS01:Unpaused
13:48:03:WU00:FS01:Connecting to 171.67.108.45:80
13:48:03:WU00:FS01:Assigned to work server 171.67.108.157
13:48:03:WU00:FS01:Requesting new work unit for slot 01: READY gpu:0:Fiji XT [Radeon R9 Fury X] from 171.67.108.157
13:48:03:WU00:FS01:Connecting to 171.67.108.157:8080
13:48:04:WU00:FS01:Downloading 8.87MiB
13:48:06:WU00:FS01:Download complete
13:48:06:WU00:FS01:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:9431 run:557 clone:4 gen:70 core:0x21 unit:0x00000055ab436c9d586fdd386b803920
13:48:06:WU00:FS01:Starting
13:48:06:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/ATI/R600/Core_21.fah/FahCore_21.exe -dir 00 -suffix 01 -version 704 -lifeline 8384 -checkpoint 15 -gpu 0 -gpu-vendor ati
13:48:06:WU00:FS01:Started FahCore on PID 9160
13:48:07:WU00:FS01:Core PID:7036
13:48:07:WU00:FS01:FahCore 0x21 started
13:48:07:WU00:FS01:0x21:*********************** Log Started 2017-12-11T13:48:07Z ***********************
13:48:07:WU00:FS01:0x21:project: 9431 (Run 557, Clone 4, Gen 70)
13:48:07:WU00:FS01:0x21:Unit: 0x00000055ab436c9d586fdd386b803920
13:48:07:WU00:FS01:0x21:CPU: 0x00000000000000000000000000000000
13:48:07:WU00:FS01:0x21:Machine: 1
13:48:07:WU00:FS01:0x21:Reading tar file core.xml
13:48:07:WU00:FS01:0x21:Reading tar file integrator.xml
13:48:07:WU00:FS01:0x21:Reading tar file state.xml
13:48:07:WU00:FS01:0x21:Reading tar file system.xml
13:48:07:WU00:FS01:0x21:Digital signatures verified
13:48:07:WU00:FS01:0x21:Folding@home GPU Core21 Folding@home Core
13:48:07:WU00:FS01:0x21:Version 0.0.18
13:48:11:WU00:FS01:0x21:Completed 0 out of 6250000 steps (0%)
13:48:11:WU00:FS01:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
13:48:13:Removing old file 'configs/config-20171202-214504.xml'
13:48:13:Saving configuration to config.xml
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:54:23:WU00:FS01:0x21:Completed 62500 out of 6250000 steps (1%)
 
#14 ·
Quote:
Originally Posted by CasperGS View Post

Where do i get the passkey?

*********************** Log Started 2017-12-11T13:45:10Z ***********************
13:45:10:************************* Folding@home Client *************************
13:45:10: Website: http://folding.stanford.edu/
13:45:10: Copyright: (c) 2009-2014 Stanford University
13:45:10: Author: Joseph Coffland
13:45:10: Args: --open-web-control
13:45:10: Config: C:/ProgramData/FAHClient/config.xml
13:45:10:******************************** Build ********************************
13:45:10: Version: 7.4.4
13:45:10: Date: Mar 4 2014
13:45:10: Time: 20:26:54
13:45:10: SVN Rev: 4130
13:45:10: Branch: fah/trunk/client
13:45:10: Compiler: Intel(R) C++ MSVC 1500 mode 1200
13:45:10: Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
13:45:10: /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
13:45:10: Platform: win32 XP
13:45:10: Bits: 32
13:45:10: Mode: Release
13:45:10:******************************* System ********************************
13:45:10: CPU: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
13:45:10: CPU ID: GenuineIntel Family 6 Model 60 Stepping 3
13:45:10: CPUs: 8
13:45:10: Memory: 11.94GiB
13:45:10: Free Memory: 8.30GiB
13:45:10: Threads: WINDOWS_THREADS
13:45:10: OS Version: 6.2
13:45:10: Has Battery: false
13:45:10: On Battery: false
13:45:10: UTC Offset: -8
13:45:10: PID: 8384
13:45:10: CWD: C:/ProgramData/FAHClient
13:45:10: OS: Windows 10 Home
13:45:10: OS Arch: AMD64
13:45:10: GPUs: 1
13:45:10: GPU 0: ATI:5 Fiji XT [Radeon R9 Fury X]
13:45:10: CUDA: Not detected
13:45:10:Win32 Service: false
13:45:10:***********************************************************************
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:
13:45:10:Trying to access database...
13:45:10:Successfully acquired database lock
13:45:10:Enabled folding slot 00: PAUSED cpu:7 (by user)
13:45:10:Enabled folding slot 01: PAUSED gpu:0:Fiji XT [Radeon R9 Fury X] (by user)
13:45:10:WARNING:WU01:FS01:past final deadline 2017-12-10T21:09:38Z, dumping
13:45:10:WU01:FS01:Cleaning up
13:45:13:12:127.0.0.1:New Web connection
13:48:02:FS01:Unpaused
13:48:03:WU00:FS01:Connecting to 171.67.108.45:80
13:48:03:WU00:FS01:Assigned to work server 171.67.108.157
13:48:03:WU00:FS01:Requesting new work unit for slot 01: READY gpu:0:Fiji XT [Radeon R9 Fury X] from 171.67.108.157
13:48:03:WU00:FS01:Connecting to 171.67.108.157:8080
13:48:04:WU00:FS01:Downloading 8.87MiB
13:48:06:WU00:FS01:Download complete
13:48:06:WU00:FS01:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:9431 run:557 clone:4 gen:70 core:0x21 unit:0x00000055ab436c9d586fdd386b803920
13:48:06:WU00:FS01:Starting
13:48:06:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/ATI/R600/Core_21.fah/FahCore_21.exe -dir 00 -suffix 01 -version 704 -lifeline 8384 -checkpoint 15 -gpu 0 -gpu-vendor ati
13:48:06:WU00:FS01:Started FahCore on PID 9160
13:48:07:WU00:FS01:Core PID:7036
13:48:07:WU00:FS01:FahCore 0x21 started
13:48:07:WU00:FS01:0x21:*********************** Log Started 2017-12-11T13:48:07Z ***********************
13:48:07:WU00:FS01:0x21:project: 9431 (Run 557, Clone 4, Gen 70)
13:48:07:WU00:FS01:0x21:Unit: 0x00000055ab436c9d586fdd386b803920
13:48:07:WU00:FS01:0x21:CPU: 0x00000000000000000000000000000000
13:48:07:WU00:FS01:0x21:Machine: 1
13:48:07:WU00:FS01:0x21:Reading tar file core.xml
13:48:07:WU00:FS01:0x21:Reading tar file integrator.xml
13:48:07:WU00:FS01:0x21:Reading tar file state.xml
13:48:07:WU00:FS01:0x21:Reading tar file system.xml
13:48:07:WU00:FS01:0x21:Digital signatures verified
13:48:07:WU00:FS01:0x21:Folding@home GPU Core21 Folding@home Core
13:48:07:WU00:FS01:0x21:Version 0.0.18
13:48:11:WU00:FS01:0x21:Completed 0 out of 6250000 steps (0%)
13:48:11:WU00:FS01:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
13:48:13:Removing old file 'configs/config-20171202-214504.xml'
13:48:13:Saving configuration to config.xml
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:48:13:
13:54:23:WU00:FS01:0x21:Completed 62500 out of 6250000 steps (1%)

http://fah-web.stanford.edu/cgi-bin/getpasskey.py

For reference there is a link on the OCN FAH forum in Red text below the sub forums.

Wait until 3-5% to get a better PPD estimate. The 1st % always takes longer for some WU setup. FAHControl just shows PPD of the last single % completed so it can vary wildly from an overall average.

Fury X should be much higher than 90k PPD.
 
#16 ·
In
wheee.gif
 
#17 ·
Quote:
Originally Posted by mmonnin View Post


http://fah-web.stanford.edu/cgi-bin/getpasskey.py

For reference there is a link on the OCN FAH forum in Red text below the sub forums.

Wait until 3-5% to get a better PPD estimate. The 1st % always takes longer for some WU setup. FAHControl just shows PPD of the last single % completed so it can vary wildly from an overall average.

Fury X should be much higher than 90k PPD.
 
#18 ·
Quote:
Originally Posted by CasperGS View Post

Your base and estimated credit are the same.... something is up with your passkey
 
#22 ·
In! It'll be less PPD than usual, but I should get a handful of WUs in.
 
#23 ·
In.
 
#25 ·
New Ryzen 1400 on the way :wooooooooooooooooooooooooooooooooooooooooooooo:

So might be able to actually have something folding for this Foldathon.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top