Overclock.net banner

Enermax TR4 240 Performance

367 views 2 replies 2 participants last post by  philrock 
#1 ·
I have an Enermax TR4 240 on my Threadripper 1950x.

Right now I have the CPU overclocked to 3.9ghz @ 1.25v and running Prime95 gets me temps around 65-66 C (Tdie). I actually dialed it back because I was getting temps of 77 C @ 1.35v. As I understand the max temp for Threadripper is 68 C.

I'm curious what other people's results are to check whether I'm getting good performance or not.
 
#2 ·
Quote:
Originally Posted by philrock View Post

I have an Enermax TR4 240 on my Threadripper 1950x.

Right now I have the CPU overclocked to 3.9ghz @ 1.25v and running Prime95 gets me temps around 65-66 C (Tdie). I actually dialed it back because I was getting temps of 77 C @ 1.35v. As I understand the max temp for Threadripper is 68 C.

I'm curious what other people's results are to check whether I'm getting good performance or not.
The 240 is just fine, my idle were around 25c and under load not max load but under load around 47c and I was happy for me.
 
#3 ·
Thanks for the reply. I'm not worried about whether the 240 is a good cooler or not, just wanted to verify whether the unit I have is performing up to par.

I actually found this video where they have a chart showing benchmark temps:

360 vs. 240 Radiator for Threadripper (Liqtech TR4 & Noctua)

At first I thought my unit was under-performing when they listed the 240 at 51C peak OC 4.0MHz 1.35V, but after listening more carefully I realized it's 51C over ambient temperatures, so if you add an extra 20-22 degrees it's more like 71-73, which is a little closer to my results.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top