Goals
My goals with Purple Reign is to be a very clean minimalistic build while achieving optimal cooling. I plan to keep it a mostly black theme with the purple coolant giving it a good contrast!
Hardware list
CPU: Intel i7 4790K MOBO: Asus Z97 Maximus VII Hero RAM: Corsair Dominator Platinum DDR3 2133mhz C9 GPU: EVGA GTX 980 Classified STORAGE: 1x Samsung Evo 1Tb SSD / 1x Kingston Hyper X M.2 240Gb SSD CASE: Fractal Define R6 Blackout TG PSU: EVGA SuperNOVA 850w G2
Water cooling parts
CPU: EK Supremacy Evo Acetal MOBO: Ek-Mosfet Asus M7G Acetal+Nickel GPU: EK-FC980 GTX Classy Rads: EK-CoolStream PE 360 + EK-CoolStream SE 240 Fans: 3x EK Vardar F4-120ER Black + 2x EK-Vardar EVO 120ER Black Pump/Res: EK-XRES 140 Revo D5 + EK-RES X3 - TUBE 250 Upgrade Tubing: Mayhems Ultra Clear Tubing Coolant: Mayhems Purple Pastel Fittings: All compression Fittings and Angled rotaries will be Barrow in Black Matte
Finally Newegg.ca opened preorders for the Define R6 TG Blackout, so just got to wait on that to release, in the meantime I should have some more goodies arriving in the next week or two!
Here is a small update, received some more stuff for my build, 980 Classy with Ek Block and Backplate , EK Acetal/Nickel Mosfet Block, and Mayhems Purple Pastel Coolant
I just sent a my 4790k and a buddies to be delidded at a friends, should have more pics up soon, still need to decide if im going hard tubing or soft tubing before I order fittings.
What kind of bins are these two? I had a 4.7GHz that ran at 1.31v and can push 2666MHz-1T all day long. For gaming, I was able to run it at 4.9GHz with 1.4v and same RAM speed. It was mighty for 4c/8t, in terms of sheer clock speed.
Hey guys sorry for the lack of build updates, been waiting for the case to become available so the builds been in limbo. Good news tho my case shipped out last night and it should arrive next week.
I might be selling my EK-XLC Predator 360 if I can find a buyer, and just buying a EK PE360 Rad along with a tube res, even tho I been eyeing the Phanteks Glacier R220 Res/Pump combo but its not available in Canada yet..
Well I finally got my Define R6 TG Blackout Edition and I couldn't be happy with the build quality for this case! I started to install my used EK-Mosfet for my Mobo but decided to order brand new thermal pads which should be here by the end of the week for a lot more updates.
After test fitting the EKWB EK-XLC Predator 360, ive decided thats not the route I want to take and will be ordering a PE360 and Pump/Res combo soon.
So today I ordered a bunch of stuff to pretty much complete my build, just have to order fittings next week after I put my build together to decide on all the fittings I need
Monday or Tuesday I should receive
- EKWB PE360
- EK-XRES 140 Revo D5 + EK-RES X3 - TUBE 250 Upgrade
- Mayhems Ultra Clear Tubing
this long ass wait finally coming to an end, not to much longer before this start to look like a completed build!
Ive received some more parts for the build and ended up finally installing my EK-Mosfet-M7G, very happy with how it looks installed.. just need a couple washers to install my EK Supremacy Evo Block.. Still waiting on the pump and res to arrive!
He is most the main components installed, and wired up, just waiting on the res/pump so I can test fit all the rads and order the fittings needed. Loving this Build so far!
Got most my water-cooling stuff installed but ended up running into clearance issues with the 280 rad with fans installed, which won't clear my ram and leave enough room install a fitting on my mosfit.
Removed the 280 rad and did some measuring and it looks like changing to a se240 rad with 120mm fans should fix all the clearance issues with the mosfet and ram.
minor set back hopefully I can sell the 280 rad and fans quickly so I can buy the replacements along with the fittings and some LED lighting so I can finally get her up and running!
Got annoyed of the pics being "attachments" at the bottom of each post and murdering the quality so I created a imgur account and updated all the previous post so all the pics should look much better!
Well I finished up designing my tube runs for my build, I think this route is the cleanest out the available options I been looking at. Probably ordering fittings tomorrow!
Ordered EK SE240 Rad, Fans and Fittings this morning, so next week should be close to completion, just have to order fan cable extensions and splitters along with some LED lighting.
Sorry about the slow updates, the last four fittings I need for this build are taking there sweet time to arrive, hopefully they come soon, ive had everything else for this build for weeks now lol
Barrow Fittings, wish the other seller shipped them as fast as these ones came!
Installation of some of the compression fittings
Couple tube runs installed
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ask a question
Ask a question
Overclock.net
27.8M posts
541.2K members
Since 2004
A forum community dedicated to overclocking enthusiasts and testing the limits of computing. Come join the discussion about computing, builds, collections, displays, models, styles, scales, specifications, reviews, accessories, classifieds, and more!