Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N32-E Overclocking Guide
New Posts  All Forums:Forum Nav:

Asus P5N32-E Overclocking Guide - Page 129

post #1281 of 5659
Quote:
Originally Posted by Magi View Post
I managed to boot into 1660 but with the following settings:

Vcore 1.45
1.2V HT 1.4
NB 1.5
SB 1.6
VTT 1.55

I have switched to having the OS back onto a single non-raid drive. After running orthos on blend for just over 7 minutes the computer shutdown and rebooted. Memory is unlinked running at 800mhz setting.
I think you're going to need more CPU vCore as this motherboard still suffers a little undervoltage to the CPU when seeting its vCore. If you check your volts with Everst or in your BIOS, you'll find that your CPU is actually running closer to 1.38v.
post #1282 of 5659
As this is my first post at this site, I would first like to say thanks to all that have contributed to this thread. I first started reading in this thread a couple months ago and decided on purchasing this board. My system specs are listed I built my current pc a month ago and soon had it OC'd to 3.37 Ghz @375 FSB x9 multi. I now have it running rock solid at 3.42 @ 380FSB x9 multi and can't seem to get any higher no matter what I change in the bios settings. I wasn't wanting to drop the multi cause it looks like not many others have.

What bothers me is that I'm reading where alot of you guys/gals have such a low Vcore when I have to run mine at 1.53125 to keep it stable and have also seen mention of not going over 1.5 on the Vcore. Ram is unlinked, NB=1.4, SB=1.5.. I've tried upping the those values to see if I could lower the Vcore but no joy. Oh yeah, I am running twin TT Extreme Spirit II's also. My temps stay mid 50's, I have seen them get as high as 58 C then drop back to 52 or 54 while running Orthos. btw, I'm currently running Orthos 8 hr. 34 min. and ticking away.

I realize that this is a pretty good overclock but I was hoping to get it up to 3.6Ghz. I've gotten it to boot at higher but can't get it stable at higher clocks. Starting to think that I may have hit a wall on this chip week, it is a latter week but has good steppings like the earlier weeks, Stepping 6 Rev B2

I'm open for any sugestions as to what to try next, or maybe just settle for this since it seems to be a pretty good 24/7 speed.
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600/lapped @ 3.42 x 9 multi Asus P5N32-E SLI (1103 Bios) BFG 8800 GTX OC2 OCZ PC2-8500 SLI 2x1 GB Micron D9GMH (B6-3) 
Hard DrivePowerCase
2 X WD Caviar SE16 X 500GB PC Power and Cooling - Silencer 750 Quad Coolermaster Stacker RC-830 Black 
  hide details  
Reply
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600/lapped @ 3.42 x 9 multi Asus P5N32-E SLI (1103 Bios) BFG 8800 GTX OC2 OCZ PC2-8500 SLI 2x1 GB Micron D9GMH (B6-3) 
Hard DrivePowerCase
2 X WD Caviar SE16 X 500GB PC Power and Cooling - Silencer 750 Quad Coolermaster Stacker RC-830 Black 
  hide details  
Reply
post #1283 of 5659
These are the settings I made in the BIOS for 3.6Ghz on my E6600;

FSB: 1600
RAM is running 5-5-5-12 1T @ 800Mhz

VCore Voltage: 1.6v
Memory Voltage: 1.9v
1.2V HT Voltage: 1.3v
NB Core Voltage: 1.55v
SB Core Voltage: 1.55v
CPU VTT Voltage: 1.55v

Please note that the above are the settings, not the actual voltages that everything is running at. For example, my CPU is running just below 1.55v after the voltage droop. Also bear in mind that optimisations to your cooling are a necessity when running at such high vCore.
post #1284 of 5659
OK,1101 bios stable for me again 12 hrs and goin.This is what it count for me stable.A little hot but i never use my rig 100%.I used less volts for the sb and for the,ht voltage.Than with the 1002 bios.OK people go and up date to the 1101=
LL
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 SLA,G0,@3.7 P5N32 SLi/680iSB=Jing ting/nb=spirit II[1203]bios] MSI 470 GTX[order on his way] 4 gig ocz Reapers pc 8500 
Hard DriveOSMonitorKeyboard
2 WD 250gig 16mb/raid 0\1 WD640 AALS 32MB win xp pro sp3/Windows 7 Beta LCD,22"=Samsung 2MS,226BW,52"samsung LN5A550 Thermaltake xaser 
PowerCaseMouseMouse Pad
oczgamexstream700 wtt x blade/modded Razor deathadder thermaltake gamer pad/led 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 SLA,G0,@3.7 P5N32 SLi/680iSB=Jing ting/nb=spirit II[1203]bios] MSI 470 GTX[order on his way] 4 gig ocz Reapers pc 8500 
Hard DriveOSMonitorKeyboard
2 WD 250gig 16mb/raid 0\1 WD640 AALS 32MB win xp pro sp3/Windows 7 Beta LCD,22"=Samsung 2MS,226BW,52"samsung LN5A550 Thermaltake xaser 
PowerCaseMouseMouse Pad
oczgamexstream700 wtt x blade/modded Razor deathadder thermaltake gamer pad/led 
  hide details  
Reply
post #1285 of 5659
Quote:
Originally Posted by t4ct1c47 View Post
I think you're going to need more CPU vCore as this motherboard still suffers a little undervoltage to the CPU when seeting its vCore. If you check your volts with Everst or in your BIOS, you'll find that your CPU is actually running closer to 1.38v.
tct1c47, thanks for the help. Another question for you and gurus here. I am running my memtest at 1600FSB with unlinked memory at 800FSB. My Bios setting are the following:
Vcore 1.48125
Memory 2.2 increased from 2.1
1.2HT 1.4
NB 1.5
SB auto
Vtt 1.55

Problem I am having is the memtest (V1.7) locks ups 5 to 13 minutes at these settings. Is this an indication of bad memory?

I am running the std test in memtest, I tried selecting under memtest configuration option 3 memory sizing, BIOS ALL. I quickly got over 1000 errors on test one when I did that.

Apprieciate the help everyone here provides!

Magi
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6420 B2 P5N32-E SLI (bios 1201) EVGA 8800GTX OCZ 2x1GB OCZ2N800SR2GK 
Hard DriveOptical DriveOSMonitor
WD320YSx2 Raid 1, 1x120GB Lite On 20x DVDRW MCE 2005 ViewSonic VX2025wm 
PowerCase
PC Quad Silencer 750w TT Armor w/25cm Fan 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6420 B2 P5N32-E SLI (bios 1201) EVGA 8800GTX OCZ 2x1GB OCZ2N800SR2GK 
Hard DriveOptical DriveOSMonitor
WD320YSx2 Raid 1, 1x120GB Lite On 20x DVDRW MCE 2005 ViewSonic VX2025wm 
PowerCase
PC Quad Silencer 750w TT Armor w/25cm Fan 
  hide details  
Reply
post #1286 of 5659
Quote:
Originally Posted by alexisd View Post
OK,1101 bios stable for me again 12 hrs and goin.This is what it count for me stable.A little hot but i never use my rig 100%.I used less volts for the sb and for the,ht voltage.Than with the 1002 bios.OK people go and up date to the 1101=
Any known benefits Alex?
Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 , 8x1TB in R-5 , 2x1TB in R-1 , 1TB ext... H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 , 8x1TB in R-5 , 2x1TB in R-1 , 1TB ext... H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
post #1287 of 5659
Quote:
Originally Posted by USlatin View Post
Any known benefits Alex?
No really,that im aware.But i go it stable,with the 1002 i can't get the same stable setting like with this new 1101.
Anyways i have a chip that love the 1.5 volts range for the 3.5+.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 SLA,G0,@3.7 P5N32 SLi/680iSB=Jing ting/nb=spirit II[1203]bios] MSI 470 GTX[order on his way] 4 gig ocz Reapers pc 8500 
Hard DriveOSMonitorKeyboard
2 WD 250gig 16mb/raid 0\1 WD640 AALS 32MB win xp pro sp3/Windows 7 Beta LCD,22"=Samsung 2MS,226BW,52"samsung LN5A550 Thermaltake xaser 
PowerCaseMouseMouse Pad
oczgamexstream700 wtt x blade/modded Razor deathadder thermaltake gamer pad/led 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 SLA,G0,@3.7 P5N32 SLi/680iSB=Jing ting/nb=spirit II[1203]bios] MSI 470 GTX[order on his way] 4 gig ocz Reapers pc 8500 
Hard DriveOSMonitorKeyboard
2 WD 250gig 16mb/raid 0\1 WD640 AALS 32MB win xp pro sp3/Windows 7 Beta LCD,22"=Samsung 2MS,226BW,52"samsung LN5A550 Thermaltake xaser 
PowerCaseMouseMouse Pad
oczgamexstream700 wtt x blade/modded Razor deathadder thermaltake gamer pad/led 
  hide details  
Reply
post #1288 of 5659
Hi,
Can you use an Evercool VC-RE on the southbridge and still fit an X-Fi card, and 8800gtx's in sli ?

Also, does the extreme spirit ii on the nb, interfere in anyway with the fan clips on the thermalright ultra extreme cpu cooler if you have it facing blowing towards the back of the case ? Can you still use the standard nuts/bolts that come with the extreme spirit II ?

thanks
post #1289 of 5659
I'd say this is pretty stable. I guess this chip is just a little volt hungry. It's a week 45G chip. I might try lapping my tuniq to see if I can get temps down a bit more.
LL
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600/lapped @ 3.42 x 9 multi Asus P5N32-E SLI (1103 Bios) BFG 8800 GTX OC2 OCZ PC2-8500 SLI 2x1 GB Micron D9GMH (B6-3) 
Hard DrivePowerCase
2 X WD Caviar SE16 X 500GB PC Power and Cooling - Silencer 750 Quad Coolermaster Stacker RC-830 Black 
  hide details  
Reply
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600/lapped @ 3.42 x 9 multi Asus P5N32-E SLI (1103 Bios) BFG 8800 GTX OC2 OCZ PC2-8500 SLI 2x1 GB Micron D9GMH (B6-3) 
Hard DrivePowerCase
2 X WD Caviar SE16 X 500GB PC Power and Cooling - Silencer 750 Quad Coolermaster Stacker RC-830 Black 
  hide details  
Reply
post #1290 of 5659
Quote:
Originally Posted by Tasteles View Post
I'd say this is pretty stable. I guess this chip is just a little volt hungry. It's a week 45G chip. I might try lapping my tuniq to see if I can get temps down a bit more.
Nice oc. Yeah you can lapp your tunic like i did.Im hitting a wall in temps too.Maybe looking into water soon.Take a look in mine.1 more thing don't trust probe for volt's,use nvidia monitor with the new 1101 bios is accurate.
LL
LL
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 SLA,G0,@3.7 P5N32 SLi/680iSB=Jing ting/nb=spirit II[1203]bios] MSI 470 GTX[order on his way] 4 gig ocz Reapers pc 8500 
Hard DriveOSMonitorKeyboard
2 WD 250gig 16mb/raid 0\1 WD640 AALS 32MB win xp pro sp3/Windows 7 Beta LCD,22"=Samsung 2MS,226BW,52"samsung LN5A550 Thermaltake xaser 
PowerCaseMouseMouse Pad
oczgamexstream700 wtt x blade/modded Razor deathadder thermaltake gamer pad/led 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 SLA,G0,@3.7 P5N32 SLi/680iSB=Jing ting/nb=spirit II[1203]bios] MSI 470 GTX[order on his way] 4 gig ocz Reapers pc 8500 
Hard DriveOSMonitorKeyboard
2 WD 250gig 16mb/raid 0\1 WD640 AALS 32MB win xp pro sp3/Windows 7 Beta LCD,22"=Samsung 2MS,226BW,52"samsung LN5A550 Thermaltake xaser 
PowerCaseMouseMouse Pad
oczgamexstream700 wtt x blade/modded Razor deathadder thermaltake gamer pad/led 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N32-E Overclocking Guide