Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N32-E Overclocking Guide
New Posts  All Forums:Forum Nav:

Asus P5N32-E Overclocking Guide - Page 164

post #1631 of 5659
HI Guys,

Well I got my quad to 3 ghz last night. I ran Orthos all night and was awakened by a beeping sound at 6:30am! Went downstairs to check it out and this is what Orthos said:

Test 1, 5300 Lucas-Lehmer iterations of M14942209 using 768K FFT length.
FATAL ERROR: Final result was E6364164, expected: EA5DB53B.
Hardware failure detected, consult stress.txt file.
Torture Test ran 9 hours, 56 minutes 30 seconds - 1 errors, 0 warnings.
Execution halted.

I searched for the stress.txt file and couldnt find it. I looked in the eventvwr for any clues and nothing.

There was another instance of Orthos running, but there were no problems reported.

My VCore is set at 1.26250 and NB set at 1.4. All the rest are set from the OC guide.

Should I up the VCore to say 1.26875 or 1.27500? Or make any other changes?

From what I read here, the Quads dont OC as good at the C2D's so what should I do???
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.00 Asus P5N32E-SLI 8800GTX Corsair 2048-8500C5D 
Hard DrivePower
WD Raptor 150 PC Pwr and Cooling Silencer 750 Quad 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.00 Asus P5N32E-SLI 8800GTX Corsair 2048-8500C5D 
Hard DrivePower
WD Raptor 150 PC Pwr and Cooling Silencer 750 Quad 
  hide details  
Reply
post #1632 of 5659
Thread Starter 
9 hours of orthos stable is more than any other app you will run in terms of load so thats pretty good. Of course upping your vcore will also improve stability. Try vcore of about 1.31 or so. It should stabilize it further.
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 6800K Asus X99-A II Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Quad  
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Corsair H100i V2 - w/ML120 Pro Fans Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Steelseries Merc  EVGA Supernova G2 1000W Corsair 450D Mionix Naos 8200 
Mouse PadAudioAudioOther
Inwin Batmat Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 6800K Asus X99-A II Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Quad  
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Corsair H100i V2 - w/ML120 Pro Fans Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Steelseries Merc  EVGA Supernova G2 1000W Corsair 450D Mionix Naos 8200 
Mouse PadAudioAudioOther
Inwin Batmat Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
post #1633 of 5659
Quote:
Originally Posted by Robilar View Post
9 hours of orthos stable is more than any other app you will run in terms of load so thats pretty good. Of course upping your vcore will also improve stability. Try vcore of about 1.31 or so. It should stabilize it further.
1.3125 it is. Thanks! Will you let you all know how it works out.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.00 Asus P5N32E-SLI 8800GTX Corsair 2048-8500C5D 
Hard DrivePower
WD Raptor 150 PC Pwr and Cooling Silencer 750 Quad 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.00 Asus P5N32E-SLI 8800GTX Corsair 2048-8500C5D 
Hard DrivePower
WD Raptor 150 PC Pwr and Cooling Silencer 750 Quad 
  hide details  
Reply
post #1634 of 5659
Quote:
Originally Posted by Imsoaks2 View Post
1.3125 it is. Thanks! Will you let you all know how it works out.
FYI, At 1.3125 now the everest test is failing. I dropped it down to 1.28125 and both tests are working fine now......
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.00 Asus P5N32E-SLI 8800GTX Corsair 2048-8500C5D 
Hard DrivePower
WD Raptor 150 PC Pwr and Cooling Silencer 750 Quad 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.00 Asus P5N32E-SLI 8800GTX Corsair 2048-8500C5D 
Hard DrivePower
WD Raptor 150 PC Pwr and Cooling Silencer 750 Quad 
  hide details  
Reply
post #1635 of 5659
OMGoodness!!!
I just sat down to try to figure out why my computer has been freezing up on me and Orthos stopped at 2min 52sec !?!?!?!?!?!? :swearing:

_I was running a CPU and RAM blend

_On Everest I have the following voltages:
Core 1.25V
FSB VTT 1.65V (what is this one?)
NB 1.62V (too high?)
SB 1.6V (too high?)
DIMM 2.29V

_Below you'll see the important screens in the BIOS

_My signature is very thorough, but if you want to know anything else please let me know. (Vdr = After Vdroop)

TESTING BEGINS:
Please guide me as I don't know what gives yet... since it was a CPU & RAM blend on Orthos it could be anything... I am running MemTest right now... but I am only up to 9% after 10min? Is this normal, I could swear it ran faster... is it because of the 4GB?
I ran MemTest when I added the 3rd and 4th GB sticks and I was stable for several hours. I am wondering if I should run something else, but MemTest was the only thing I could think of to try to isolate the problem... How long should I run it to rule out RAM? 8hs?
Shoud I run a CPU test instead? Orthos or OTTC?
Maybe I should let Memtest get one full pass and then run a CPU test?

PLEASE HELP!!!




Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 + 5x7200rpm R-0 H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 + 5x7200rpm R-0 H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
post #1636 of 5659
I ran a full pass on Memtest and then I tried a CPU test on Orthos and no problems for 12 minutes... I have to do work while I test so I had to stop it but I guess I should run the CPU test for a while to see what happens...

EDIT: I ran CPU Orthos and it was fine for 35min... gonna run combo test now...
Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 + 5x7200rpm R-0 H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 + 5x7200rpm R-0 H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
post #1637 of 5659
_I was running a CPU and RAM blend

_On Orthos I have the following voltages:
Core 1.25V
FSB VTT 1.65V (what is this one?)
NB 1.62V (too high?)
SB 1.6V (too high?)
DIMM 2.29V

_Below you'll see the important screens in the BIOS

_My signature is very thorough, but if you want to know anything else please let me know. (Vdr = After Vdroop)

PLEASE HELP!!![/QUOTE]

From what I can see your NB & SB are too high.
@ 515 FSB I had the NB 1.45V & SB 1.5V
If you have no active cooling on both then that is your problem
I was having trouble with the NB (heat) with only a 40x40x20mm 10cfm fan on it @ 400FSB 1.4VNB. It would freeze or just restart.
At the very least you should get a better NB cooler.
From memory you used a fan on the NB but just stuck it there with Double sided tap (correct me if I am wrong)
If you run orthos with the cpu test the problem should show its ugly head again anywhere from 9-30 min into the test
Well it did for me.
Also what is the ambient temp is it constant or is that another variable adding to your troubles
Hope this helps
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
post #1638 of 5659
I am at the 1/2 hs mark on the combo and no problems so far...

You do remember correctly... I have a small 40mm fan stuck on it and dded a few copper heatsinks to the NB... I just hit 50C on the NB with the combo test and I am at a cool 72F ambient...

I lowered the NB voltage to 1.5V which gives me a 1.55V on Everest, so I'll see what happens to temps while I run an Orthos combo

BTW on the first post I meant to say "on EVEREST I have the following voltages:" not Orthos... i edited it

I was hoping to get away with the cooling I have now till I got a Quad when prices drop so I didn't have to open up the computer again but it seems I might not make it through the beginning of the summer like this... I mean... 50C on the NB is basically the problem for sure right?
Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 + 5x7200rpm R-0 H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 + 5x7200rpm R-0 H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
post #1639 of 5659
I crashed at 3min again... I guess it needs the voltage for the added ram? (4GB)?

And it seems it might be the temperature of the NB that is freezing my rig then... right?
Could I damage the board running it like this?
Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 + 5x7200rpm R-0 H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 + 5x7200rpm R-0 H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
post #1640 of 5659
Quote:
Originally Posted by USlatin View Post
I crashed at 3min again... I guess it needs the voltage for the added ram? (4GB)?

And it seems it might be the temperature of the NB that is freezing my rig then... right?
Could I damage the board running it like this?

I have not used 4gb ram on this board so you could be right on that one.
You may want to ask some one on this thread who is running 4GB ram what there settings are.

I can not be 100% correct with it being the NB but that is where I had a lot of problems till I put it on water then I could go all the way to 536FSB with full stability
And yes chances are that you will damage the board if you continue to push it with out a better cooling system.
With that voltage & FSB running through the NB you "will" need better cooling to get long term stability and a long life out of the board

Do you find when the ambient temps rise you have more problems?
An easy way to check this is to run a test for 30 min then turn the heating on, up you room temp by about 5-10c then run the test again.
If the first one passes and the second one fails then you will know that heat is the problem.
My NB would run great (with 40mm fan) till the room temp got above 19-20c then it would fail.
This sort of test will also give you a good idea of how much head room you have in your cooling system for all of your components.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N32-E Overclocking Guide