Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N32-E Overclocking Guide
New Posts  All Forums:Forum Nav:

Asus P5N32-E Overclocking Guide - Page 215

post #2141 of 5659
Quote:
Originally Posted by Magi View Post
I am wondering if this has occurred for anyone else. I have my memory currently running in unlinked mode at 850 4-4-48 1T. Now I go and raise it to 900mhz and in the post screen it reports 850mhz 4-4-8-1T. Once windows boots up and I pull up Everest I get the same reading.

I reboot change mem speed to 910mhz and in the post it comes up as 907mhz with the correct timings. I am wondering if this is caused by a strap setting? Is anyone else experiencing this? Just wondering as the mem is suppose to run unlinked from the FSB in this mode.

My current settings are:
FSB 1700 (425)
Vcore 1.5187
NB 1.50
SB 1.5
1.2HT 1.3
VTT 1.55 (1.63 Everest Reading)
Not all memspeeds are available. I don't know why, I would suggest strapping.
When adjusting in the BIOS, if you enter the speed manually it should display what it will POST at when you hit the enter key. When using the + and - keys to adjust, hit the enter key twice and it should then display what it will POST at.
Trouble
(13 items)
 
  
CPUMotherboardGraphicsRAM
QX9650 EVGA 790i@P07 3X EVGA GTX280 4X 1GB OCZ DDR3 14400 
Hard DriveOptical DriveOSMonitor
2X 74GB Raptor Raid 0/(2)2X WD320 Raid 0 2X Samsung 18XDVDRW XP32/ViPre64/ViBas64 Dell 3007WFP 
KeyboardPowerCaseMouse
Saitek Cyborg TT TP 1200W Lian-Li 343B MS TBall Optical/MX Revolution 
  hide details  
Reply
Trouble
(13 items)
 
  
CPUMotherboardGraphicsRAM
QX9650 EVGA 790i@P07 3X EVGA GTX280 4X 1GB OCZ DDR3 14400 
Hard DriveOptical DriveOSMonitor
2X 74GB Raptor Raid 0/(2)2X WD320 Raid 0 2X Samsung 18XDVDRW XP32/ViPre64/ViBas64 Dell 3007WFP 
KeyboardPowerCaseMouse
Saitek Cyborg TT TP 1200W Lian-Li 343B MS TBall Optical/MX Revolution 
  hide details  
Reply
post #2142 of 5659
Robilar, I think you should clarify that the X-Fi sound cards will create clearence issues with secondary or after-market cooling. It works perfectly fine with the default cooler. Right now you just state the following in bold:
Quote:
Originally Posted by Robilar
The Creative X-FI Gamer is 157mm long and will create clearance issues with SB cooling.
Not a big deal, but it is a bit misleading to someone who doesn't read the whole thing (and we know there are plenty of people who don't).

Also, ASUS Tech support says to put RAM sticks in the third slot from the CPU, not the nearest one, if you are going to load up the system with just one stick to set BIOS settings. At least one set of RAM modules that I have used would only work if the single stick were placed in the third slot. Right now you state to put it in the DIMM slot nearest the CPU.

Finally, what exactly is the 1.2HT voltage setting for?
BladeRunner v3.0
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-5930K @ 4.6GHz Core, 4.4GHz Cache ASUS X99 Sabertooth Sapphire R9 380 Dual-X OC G.Skill TridentZ 32GB DDR4 @ 13-15-13-33-1T 320... 
Hard DriveCoolingOSKeyboard
Samsung 850 Pro 512GB Noctua NH-D15S Windows 10 Home 64-bit Logitech G910 Orion Spark 
PowerCaseMouse
EVGA SuperNova 1000W T2 NZXT Phantom 820 Black Logitech G5 
  hide details  
Reply
BladeRunner v3.0
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-5930K @ 4.6GHz Core, 4.4GHz Cache ASUS X99 Sabertooth Sapphire R9 380 Dual-X OC G.Skill TridentZ 32GB DDR4 @ 13-15-13-33-1T 320... 
Hard DriveCoolingOSKeyboard
Samsung 850 Pro 512GB Noctua NH-D15S Windows 10 Home 64-bit Logitech G910 Orion Spark 
PowerCaseMouse
EVGA SuperNova 1000W T2 NZXT Phantom 820 Black Logitech G5 
  hide details  
Reply
post #2143 of 5659
Quote:
Originally Posted by SA3L View Post
I just want to say that the OCZ XTC ram cooler fits on this board, but it is pretty big so you can only use one of the pci-ex 16. http://www.ocztechnology.com/product...ocz_xtc_cooler
It can be done you may need to use a bit of plastic to stop contact with the top card but if is done right you don't have to.
You can see in my gallery pic's
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
post #2144 of 5659
I want that RAM cooler so bad,

Hey guys, is there anyone out here that already Hard Modded their board?
Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 , 8x1TB in R-5 , 2x1TB in R-1 , 1TB ext... H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 , 8x1TB in R-5 , 2x1TB in R-1 , 1TB ext... H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
post #2145 of 5659
Quote:
Originally Posted by Litlratt View Post
Not all memspeeds are available. I don't know why, I would suggest strapping.
When adjusting in the BIOS, if you enter the speed manually it should display what it will POST at when you hit the enter key. When using the + and - keys to adjust, hit the enter key twice and it should then display what it will POST at.

The reason for this is that this board it not truly unlinked you are still bound by dividers. You can enter what ever number you want and it will round down to the closet divider.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
post #2146 of 5659
Quote:
Originally Posted by USlatin View Post
I want that RAM cooler so bad,

Hey guys, is there anyone out here that already Hard Modded their board?
I haven't had time and I am waiting on a E6850 and Apogee GTX so i might do it when they come in. Been waiting 2 weeks (e6850) now but i get to chose the week# when they do come in (thats if they are not all the same)
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
post #2147 of 5659
Quote:
Originally Posted by charger265 View Post
I haven't had time and I am waiting on a E6850 and Apogee GTX so i might do it when they come in. Been waiting 2 weeks (e6850) now but i get to chose the week# when they do come in (thats if they are not all the same)
are you gonna do the soldering yourself?
Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 , 8x1TB in R-5 , 2x1TB in R-1 , 1TB ext... H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
Staaayshon
(13 items)
 
  
CPUMotherboardGraphicsRAM
4790k Z97 Sabertooth 1070 Sea Hawk 2x8GB Tridents 
Hard DriveCoolingOSMonitor
Evo 840 , 8x1TB in R-5 , 2x1TB in R-1 , 1TB ext... H110 W10 1x1440p, 2x1200p, Z24x 
PowerCase
EVGA 850W G2 C70 
  hide details  
Reply
post #2148 of 5659
Quote:
Originally Posted by charger265 View Post
I haven't had time and I am waiting on a E6850 and Apogee GTX so i might do it when they come in. Been waiting 2 weeks (e6850) now but i get to chose the week# when they do come in (thats if they are not all the same)
Link to the better weeks?
Should have mine this week. e6850 that is
Trouble
(13 items)
 
  
CPUMotherboardGraphicsRAM
QX9650 EVGA 790i@P07 3X EVGA GTX280 4X 1GB OCZ DDR3 14400 
Hard DriveOptical DriveOSMonitor
2X 74GB Raptor Raid 0/(2)2X WD320 Raid 0 2X Samsung 18XDVDRW XP32/ViPre64/ViBas64 Dell 3007WFP 
KeyboardPowerCaseMouse
Saitek Cyborg TT TP 1200W Lian-Li 343B MS TBall Optical/MX Revolution 
  hide details  
Reply
Trouble
(13 items)
 
  
CPUMotherboardGraphicsRAM
QX9650 EVGA 790i@P07 3X EVGA GTX280 4X 1GB OCZ DDR3 14400 
Hard DriveOptical DriveOSMonitor
2X 74GB Raptor Raid 0/(2)2X WD320 Raid 0 2X Samsung 18XDVDRW XP32/ViPre64/ViBas64 Dell 3007WFP 
KeyboardPowerCaseMouse
Saitek Cyborg TT TP 1200W Lian-Li 343B MS TBall Optical/MX Revolution 
  hide details  
Reply
post #2149 of 5659
Quote:
Originally Posted by USlatin View Post
are you gonna do the soldering yourself?
Yea

You can have a look at the job I did on both 88's in my gallery
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
post #2150 of 5659
Quote:
Originally Posted by Litlratt View Post
Link to the better weeks?
Should have mine this week. e6850 that is
I haven't found one as yet but I will pick one in the early to mid week range.
I am applying the theory of the weeks of the e6600 they slowly worked there way up to week 28 being the best then weaned off after that.
I guess its just pot luck....
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6850 @ 3.93GHz P5N32-E SLi 8800GTS 640MB SLi 702/1080 OCZ2N1066SRG1 
Hard DriveOptical DriveMonitorPower
74GB Raptor16MB RAID 0 Panasonic 212D DVD Diamond Pro 2070sb CRT 21" Silverstone 850W Strider 
Case
Antec 900 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N32-E Overclocking Guide