Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N32-E Overclocking Guide
New Posts  All Forums:Forum Nav:

Asus P5N32-E Overclocking Guide - Page 304

post #3031 of 5659
I think I'm going with 1:1, low-latency... Some observations with 4x1GB:





FSB RAM RAM TIMINGS RTO Read/Write/Copy/Latency

272 272 544 3-3-3-6-1T 1:1 7887/5742/5037/60.2
272 544 1088 5-5-5-15-2T 2:1 7519/5720/5778/57.8
295 443 885 4-4-4-12-2T 3:2 8415/5212/5690/58.5
295 472 944 4-4-4-12-2T 8:5 8426/5319/5843/58.5
295 295 590 3-3-3-9-1T 1:1 8593/5377/5644/55.8
320 320 640 3-3-3-9-1T 1:1 9075/5832/6054/55.4
LL
Wolfdale 836 CFM
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @ 4.23 (470x9, 1.40v) ASUS Rampage Formula X38 0403 (Maximus 1.03G Hack) EVGA GTX 280 670/2430/1458 & EVGA 9600GT SC 4x1GB Ballistix PC2-8500, 1128MHz, 2.18v 
Hard DriveOptical DriveOSMonitor
2xWD Raptor 150 @ RAID 0 + Pagefile HDD 2 Sony DVD/RW Vista Ultimate x64 SP1 Samsung 244T & Samsung 940B 
KeyboardPowerCaseMouse
Logitech G15 1.1kW Tagan TG1100-U96 NZXT Zero (Modded) Logitech MX Revolution 
Mouse Pad
QPAD XT-R 
  hide details  
Reply
Wolfdale 836 CFM
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @ 4.23 (470x9, 1.40v) ASUS Rampage Formula X38 0403 (Maximus 1.03G Hack) EVGA GTX 280 670/2430/1458 & EVGA 9600GT SC 4x1GB Ballistix PC2-8500, 1128MHz, 2.18v 
Hard DriveOptical DriveOSMonitor
2xWD Raptor 150 @ RAID 0 + Pagefile HDD 2 Sony DVD/RW Vista Ultimate x64 SP1 Samsung 244T & Samsung 940B 
KeyboardPowerCaseMouse
Logitech G15 1.1kW Tagan TG1100-U96 NZXT Zero (Modded) Logitech MX Revolution 
Mouse Pad
QPAD XT-R 
  hide details  
Reply
post #3032 of 5659
Quote:
Originally Posted by Litlratt View Post
I shut Orthos down after 24 hours stable.
http://www.overclock.net/gallery/sho...ze/big/cat/500

@off chops
post your BIOS values as well as a screenie of the sensor in Everest under load. CPU=Z for cpu and mem.
FSB - 415hmz
cpu volt - 1.5
NB volt - 1.5
SB volt - 1.6
HT volt - 1.35
MEM volt - 2.150
MEM Timings 4 4 4 6 1T
there ya go Lilrat. is that enough info?
LL
LL
goes alrite
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 860 @ 4.51ghz gigabyte ga-p55a-ud3r cf vtx x edition 6970s 8 gig ripjaw ddr3 2000mhz 
Hard DriveOptical DriveOSMonitor
250gig + 250gig + 2tb storage asus quietrack windows 7 64bit 28" viewsonic 1080p hdmi 
KeyboardPowerCaseMouse
logitech g15 850watt silverstone coolermaster haf22 logitech g5 
  hide details  
Reply
goes alrite
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 860 @ 4.51ghz gigabyte ga-p55a-ud3r cf vtx x edition 6970s 8 gig ripjaw ddr3 2000mhz 
Hard DriveOptical DriveOSMonitor
250gig + 250gig + 2tb storage asus quietrack windows 7 64bit 28" viewsonic 1080p hdmi 
KeyboardPowerCaseMouse
logitech g15 850watt silverstone coolermaster haf22 logitech g5 
  hide details  
Reply
post #3033 of 5659
hmm seems like I got no help here regarding oc ..

o well....

..so I decided to do it by myself....

For those who don't know , the NF 6 series chipsets are blazing hot even at stock.

HR-05 Lapped , MCP Lapped , ZT Nirvana lapped.

SPP cooled with Yateloon DS12H-12

MCP with a generic HS on top of the stock one

AS MX-2 used.

Let the pictures do the talking ?

http://img403.imageshack.us/img403/8831/zomghx5.jpg

http://img112.imageshack.us/img112/6594/zomg2hc9.jpg

PS : what NB coolers do you guys use ?
    
CPUMotherboardGraphicsRAM
E6550 @ 3.52 ghz Asus Blitz Formula 2128 FSB QDR XV-7900GSS 695/1840 KVR 2X1GB 1100 MHz 5-4-5-5 2.1V 
Hard DriveOptical DriveOSMonitor
ST3250 8MB and WD5000AAKS X4 16MB LG DVD-RW 18X18 Windows XP modded Dell FP1905 Ultrasharp 
KeyboardPowerCaseMouse
Logitech G15 Antec Truepower II 550W SLi Coolermaster Stacker 832 Mod Black Logitech MX 518 @1600 DPI 
Mouse Pad
Razer eXactmat 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E6550 @ 3.52 ghz Asus Blitz Formula 2128 FSB QDR XV-7900GSS 695/1840 KVR 2X1GB 1100 MHz 5-4-5-5 2.1V 
Hard DriveOptical DriveOSMonitor
ST3250 8MB and WD5000AAKS X4 16MB LG DVD-RW 18X18 Windows XP modded Dell FP1905 Ultrasharp 
KeyboardPowerCaseMouse
Logitech G15 Antec Truepower II 550W SLi Coolermaster Stacker 832 Mod Black Logitech MX 518 @1600 DPI 
Mouse Pad
Razer eXactmat 
  hide details  
Reply
post #3034 of 5659
Ok gurus' I am fresh outa ideas hopin some of you guys could help me out. I am finalizing what I'm calling (I'm not voiding my warranty so suck on that intel OC). Running a fsb of 1333mhz at 1.2972 vcore (actual)
1.25 (1.2ht)
1.25 nb
1.50 sb
1.35 cpu vtt
1.90v mem
fsb stable 16hrs (p95 small ftt's 16hrs)
And here is where I'm totally stumped. Ive got the mem running at 945mhz at 5,5,5,15,30,2t And I'm trying to get the mem up to anything above that (1066 would be my goal if I set one). Totally stable at 24 hrs P95 blend with web browsing also. But 1mhz higher and no boot (dram error on post). I have tried all mem volts setting from 1.9v to 2.35v as well as nb volts from 1.25v to 1.45v. I have also tried adding some sb (i know this should have no bearing and it didnt). I have tried combos of this for days now. Basically I used the combination lock method (set mem to a number, add nb, add nb, then new mem volt, and go thru the spectrum of nb again and so on. HELP thanks for reading guys..... also I have had the fsb up to 1430 at 1.41v (3dmark06 loop stable but cant even dream of p95)Thanks again.
Gas Jet
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 @ 3.33 lapped 1800grit(wet) Striker Extreme v1 evga 8800gtx superclocked edition (648/2106) 2gb tracer ballistix ddr2 (966) 8500 
Hard DriveOptical DriveOSMonitor
(3) seagate 320gb 16mb sata2 in raid 5 lite on burner 06 xp pro32/vista ultimate 32 lg 22" 
KeyboardPowerCaseMouse
saitek 3color/ saitek command pro gamer pc power and cooling 1kw csx blue flame cm stacker 830 logitech g5 
Mouse Pad
Allsop Alluminum 
  hide details  
Reply
Gas Jet
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 @ 3.33 lapped 1800grit(wet) Striker Extreme v1 evga 8800gtx superclocked edition (648/2106) 2gb tracer ballistix ddr2 (966) 8500 
Hard DriveOptical DriveOSMonitor
(3) seagate 320gb 16mb sata2 in raid 5 lite on burner 06 xp pro32/vista ultimate 32 lg 22" 
KeyboardPowerCaseMouse
saitek 3color/ saitek command pro gamer pc power and cooling 1kw csx blue flame cm stacker 830 logitech g5 
Mouse Pad
Allsop Alluminum 
  hide details  
Reply
post #3035 of 5659
Quote:
Originally Posted by off chops View Post
FSB - 415hmz
cpu volt - 1.5
NB volt - 1.5
SB volt - 1.6
HT volt - 1.35
MEM volt - 2.150
MEM Timings 4 4 4 6 1T
there ya go Lilrat. is that enough info?
Yes. That gives others an idea of what to work with. BTW, that's the highest oc I've seen with the 9X and our board.

Quote:
Originally Posted by Liyana View Post
hmm seems like I got no help here regarding oc ..
I'm not familiar with your board and/or chipset so I didn't think it appropriate to suggest anything. However, looking at your screenie, the ht value of 1.71 is really high in comparison to what is necessary on our boards.

Quote:
Originally Posted by EAT View Post
Ok gurus' I am fresh outa ideas hopin some of you guys could help me out. I am finalizing what I'm calling (I'm not voiding my warranty so suck on that intel OC). Running a fsb of 1333mhz at 1.2972 vcore (actual)
1.25 (1.2ht)
1.25 nb
1.50 sb
1.35 cpu vtt
1.90v mem
fsb stable 16hrs (p95 small ftt's 16hrs)
And here is where I'm totally stumped. Ive got the mem running at 945mhz at 5,5,5,15,30,2t And I'm trying to get the mem up to anything above that (1066 would be my goal if I set one). Totally stable at 24 hrs P95 blend with web browsing also. But 1mhz higher and no boot (dram error on post). I have tried all mem volts setting from 1.9v to 2.35v as well as nb volts from 1.25v to 1.45v. I have also tried adding some sb (i know this should have no bearing and it didnt). I have tried combos of this for days now. Basically I used the combination lock method (set mem to a number, add nb, add nb, then new mem volt, and go thru the spectrum of nb again and so on. HELP thanks for reading guys..... also I have had the fsb up to 1430 at 1.41v (3dmark06 loop stable but cant even dream of p95)Thanks again.
If I understand you correctly, you want to increase your oc without voiding your warranty?
Start by increasing cpu vtt to max.
Trouble
(13 items)
 
  
CPUMotherboardGraphicsRAM
QX9650 EVGA 790i@P07 3X EVGA GTX280 4X 1GB OCZ DDR3 14400 
Hard DriveOptical DriveOSMonitor
2X 74GB Raptor Raid 0/(2)2X WD320 Raid 0 2X Samsung 18XDVDRW XP32/ViPre64/ViBas64 Dell 3007WFP 
KeyboardPowerCaseMouse
Saitek Cyborg TT TP 1200W Lian-Li 343B MS TBall Optical/MX Revolution 
  hide details  
Reply
Trouble
(13 items)
 
  
CPUMotherboardGraphicsRAM
QX9650 EVGA 790i@P07 3X EVGA GTX280 4X 1GB OCZ DDR3 14400 
Hard DriveOptical DriveOSMonitor
2X 74GB Raptor Raid 0/(2)2X WD320 Raid 0 2X Samsung 18XDVDRW XP32/ViPre64/ViBas64 Dell 3007WFP 
KeyboardPowerCaseMouse
Saitek Cyborg TT TP 1200W Lian-Li 343B MS TBall Optical/MX Revolution 
  hide details  
Reply
post #3036 of 5659
Quote:
If I understand you correctly, you want to increase your oc without voiding your warranty?
Start by increasing cpu vtt to max.
Actually I'm sure I've probably voided it..... mostly its just what I've been terming the oc. My only real issue is that I can't get my memory over 945mhz at loose timings (please refer to the rest of the post). I am glad you replied though as I was hoping for you or Roblilar or Uslatin. Oh and for some reason my vtt over 1.4 causes instability on higher overclocks of the fsb. This seems backwards to all I've read at OCN well anywhere in fact. I wont argue as this striker seems very picky about everything. I cant believe adding or decreasing my mem voltage in no way affects my stability! Thanks for your help.......hopefully you have something I havent tried cuz this is retarded that I cant get over 945 on 1066 rated mem.
Gas Jet
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 @ 3.33 lapped 1800grit(wet) Striker Extreme v1 evga 8800gtx superclocked edition (648/2106) 2gb tracer ballistix ddr2 (966) 8500 
Hard DriveOptical DriveOSMonitor
(3) seagate 320gb 16mb sata2 in raid 5 lite on burner 06 xp pro32/vista ultimate 32 lg 22" 
KeyboardPowerCaseMouse
saitek 3color/ saitek command pro gamer pc power and cooling 1kw csx blue flame cm stacker 830 logitech g5 
Mouse Pad
Allsop Alluminum 
  hide details  
Reply
Gas Jet
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 @ 3.33 lapped 1800grit(wet) Striker Extreme v1 evga 8800gtx superclocked edition (648/2106) 2gb tracer ballistix ddr2 (966) 8500 
Hard DriveOptical DriveOSMonitor
(3) seagate 320gb 16mb sata2 in raid 5 lite on burner 06 xp pro32/vista ultimate 32 lg 22" 
KeyboardPowerCaseMouse
saitek 3color/ saitek command pro gamer pc power and cooling 1kw csx blue flame cm stacker 830 logitech g5 
Mouse Pad
Allsop Alluminum 
  hide details  
Reply
post #3037 of 5659
Just let me know if I was unclear in my original post as I will retype it.
Gas Jet
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 @ 3.33 lapped 1800grit(wet) Striker Extreme v1 evga 8800gtx superclocked edition (648/2106) 2gb tracer ballistix ddr2 (966) 8500 
Hard DriveOptical DriveOSMonitor
(3) seagate 320gb 16mb sata2 in raid 5 lite on burner 06 xp pro32/vista ultimate 32 lg 22" 
KeyboardPowerCaseMouse
saitek 3color/ saitek command pro gamer pc power and cooling 1kw csx blue flame cm stacker 830 logitech g5 
Mouse Pad
Allsop Alluminum 
  hide details  
Reply
Gas Jet
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 @ 3.33 lapped 1800grit(wet) Striker Extreme v1 evga 8800gtx superclocked edition (648/2106) 2gb tracer ballistix ddr2 (966) 8500 
Hard DriveOptical DriveOSMonitor
(3) seagate 320gb 16mb sata2 in raid 5 lite on burner 06 xp pro32/vista ultimate 32 lg 22" 
KeyboardPowerCaseMouse
saitek 3color/ saitek command pro gamer pc power and cooling 1kw csx blue flame cm stacker 830 logitech g5 
Mouse Pad
Allsop Alluminum 
  hide details  
Reply
post #3038 of 5659
Quote:
Originally Posted by EAT View Post
Actually I'm sure I've probably voided it..... mostly its just what I've been terming the oc. My only real issue is that I can't get my memory over 945mhz at loose timings (please refer to the rest of the post). I am glad you replied though as I was hoping for you or Roblilar or Uslatin. Oh and for some reason my vtt over 1.4 causes instability on higher overclocks of the fsb. This seems backwards to all I've read at OCN well anywhere in fact. I wont argue as this striker seems very picky about everything. I cant believe adding or decreasing my mem voltage in no way affects my stability! Thanks for your help.......hopefully you have something I havent tried cuz this is retarded that I cant get over 945 on 1066 rated mem.
Have you memtested both sticks at stock?
Are sticks in slots 1 and 3?
These boards normally require around .2 or so less than suggested.
Trouble
(13 items)
 
  
CPUMotherboardGraphicsRAM
QX9650 EVGA 790i@P07 3X EVGA GTX280 4X 1GB OCZ DDR3 14400 
Hard DriveOptical DriveOSMonitor
2X 74GB Raptor Raid 0/(2)2X WD320 Raid 0 2X Samsung 18XDVDRW XP32/ViPre64/ViBas64 Dell 3007WFP 
KeyboardPowerCaseMouse
Saitek Cyborg TT TP 1200W Lian-Li 343B MS TBall Optical/MX Revolution 
  hide details  
Reply
Trouble
(13 items)
 
  
CPUMotherboardGraphicsRAM
QX9650 EVGA 790i@P07 3X EVGA GTX280 4X 1GB OCZ DDR3 14400 
Hard DriveOptical DriveOSMonitor
2X 74GB Raptor Raid 0/(2)2X WD320 Raid 0 2X Samsung 18XDVDRW XP32/ViPre64/ViBas64 Dell 3007WFP 
KeyboardPowerCaseMouse
Saitek Cyborg TT TP 1200W Lian-Li 343B MS TBall Optical/MX Revolution 
  hide details  
Reply
post #3039 of 5659
hi
is it just the one core that gets overclocked on the core 2 duo if so why that
and is there any way to overcloke the other core
spartan
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E8600 Asus P5N32-E SLI NF680i SLI bfg GTX260 maxcore 2x1 gig ocz Reapers pc 8500 
Hard DriveOptical DriveOSMonitor
2xSeagate ST3160815AS Barracuda LG DVDmulti, sony CD rewriter Vista samsung syscmaster T200HD 
KeyboardPowerCaseMouse
Microsoft wireless comfort keyboard 600w nzxt Apollo Microsoft wireless laser mouse 6000 
Mouse Pad
nova, killer 2 
  hide details  
Reply
spartan
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E8600 Asus P5N32-E SLI NF680i SLI bfg GTX260 maxcore 2x1 gig ocz Reapers pc 8500 
Hard DriveOptical DriveOSMonitor
2xSeagate ST3160815AS Barracuda LG DVDmulti, sony CD rewriter Vista samsung syscmaster T200HD 
KeyboardPowerCaseMouse
Microsoft wireless comfort keyboard 600w nzxt Apollo Microsoft wireless laser mouse 6000 
Mouse Pad
nova, killer 2 
  hide details  
Reply
post #3040 of 5659
Hi all.
I'm trying to OC my Q6600 G0 to 3Ghz (should be a piece of cake from what I've read).
2.8Ghz (9x1244) runs Prime95 stable for hours at 1.3v Vcore but as soon as I'm trying to raise it to 2.9 it's finished and won't post. I upped the Vcore to 1.35v but still nothing. At 2.8Ghz core temperatures are fine at 38C (in Coretemp) idle so that's not the problem. I'm not sure what to do with the memory speed. I have OCZ Platinum PC6400 which has 5-4-4-15 timings which I'm running at the required 2.1v. I have set the FSB-Memory Clock Mode to Unlinked and the memory at 800Mhz. Is this wrong and should it be set to Linked 5:4 or Auto? Or should I just raise the Vcore even more? I'm sure there must be something I could try and perhaps some of you have any ideas or tips?
Nisei
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 Alienware LGA2011 GeForce 560 Ti 8GB 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 Hitachi HDS721010 LG BD Liquid cooling 
OSMonitorMonitorKeyboard
Windows 7 Ultimate x64 Acer HN274H 120Hz LG L245WP Microsoft Digital Media Pro 
PowerCaseMouseAudio
Gigabyte Odin Pro 800W Alienware Aurora ALX Logitech RX300 E-Mu 0404USB 
  hide details  
Reply
Nisei
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 Alienware LGA2011 GeForce 560 Ti 8GB 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 Hitachi HDS721010 LG BD Liquid cooling 
OSMonitorMonitorKeyboard
Windows 7 Ultimate x64 Acer HN274H 120Hz LG L245WP Microsoft Digital Media Pro 
PowerCaseMouseAudio
Gigabyte Odin Pro 800W Alienware Aurora ALX Logitech RX300 E-Mu 0404USB 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N32-E Overclocking Guide