Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N32-E Overclocking Guide
New Posts  All Forums:Forum Nav:

Asus P5N32-E Overclocking Guide - Page 518

post #5171 of 5659
Quote:
Originally Posted by burtethead View Post
hey labeldave, u have the same cpu and cooler as me. what temps are you getting with that overclock? and what vcore are you using?
with that overclock, I'm setting the vcore to 1.38125 (1.36 reading in bios).
and NB voltage to 1.5-1.55. 1.55 seems a little more stable. My highest hit temp was 61 C. By running 3dmark06 3 times in a row.


Last night I played around some more and got it stable at 4.05ghz 1780x9. But with a vcore set to 1.425 and NB set to 1.65V. Highest temp hit was 63 C. I'm not sure if I would recommend going that high with these voltages though. I can't read NB and SB temps in everest. It won't recognize my board.
But excitingly enough I got a 3Dmark06 score of 18,850.
WORK IN PROGRESS
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4.45Ghz(1780X10) 1.42v P5N32-E 8800GT SLI x2 2x 2024 CRUCIAL BALLISTIX 890MHZ 5-5-5-15 2T 
Hard DriveOptical DriveOSMonitor
RAPTOR 74GB DVD R/W WINDOWS XP SCEPTRE 21" WIDE 
PowerCase
PCP&C QUAD 750W COOLERMASTER 590 
  hide details  
Reply
WORK IN PROGRESS
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4.45Ghz(1780X10) 1.42v P5N32-E 8800GT SLI x2 2x 2024 CRUCIAL BALLISTIX 890MHZ 5-5-5-15 2T 
Hard DriveOptical DriveOSMonitor
RAPTOR 74GB DVD R/W WINDOWS XP SCEPTRE 21" WIDE 
PowerCase
PCP&C QUAD 750W COOLERMASTER 590 
  hide details  
Reply
post #5172 of 5659
ok folks, I'm shooting for 4.2 - 4.5 ghz tonight. Wish me luck. I will post stats and run prime95 or orthos tests.
WORK IN PROGRESS
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4.45Ghz(1780X10) 1.42v P5N32-E 8800GT SLI x2 2x 2024 CRUCIAL BALLISTIX 890MHZ 5-5-5-15 2T 
Hard DriveOptical DriveOSMonitor
RAPTOR 74GB DVD R/W WINDOWS XP SCEPTRE 21" WIDE 
PowerCase
PCP&C QUAD 750W COOLERMASTER 590 
  hide details  
Reply
WORK IN PROGRESS
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4.45Ghz(1780X10) 1.42v P5N32-E 8800GT SLI x2 2x 2024 CRUCIAL BALLISTIX 890MHZ 5-5-5-15 2T 
Hard DriveOptical DriveOSMonitor
RAPTOR 74GB DVD R/W WINDOWS XP SCEPTRE 21" WIDE 
PowerCase
PCP&C QUAD 750W COOLERMASTER 590 
  hide details  
Reply
post #5173 of 5659
Hi i need help with you guys, because i have a problem since today.

Let me show you my sistem first:

E8400
P5N-E SLI (Bios 1101)
Ram 2 X 2Gb Exceleram PC6400 5-5-5-15-23

Untill yesterday i was able to OC easily my CPU to 3.6 Ghz with Vcore 1.225 with 1 x 1Gb Kingston Value Ram PC5300 (667Mhz) but since the moment that i´ve installed the Exceleram (today) i cannot OC anymore, i go to bios, select FSB 400, select unlinked and save and after the restart the bios put again the FSB to stock settings, i don´t now what to do anymore but it´s obvious that is related with my new ram. What can i do?

Thank´s

groogster
post #5174 of 5659
Quote:
Originally Posted by labeldave View Post
ok folks, I'm shooting for 4.2 - 4.5 ghz tonight. Wish me luck. I will post stats and run prime95 or orthos tests.
what kind of cooling do you have on your NB, 1.65 is pretty high. i hope you manage to get 4.2 but i think its going to be a struggle

Quote:
Originally Posted by groogster View Post
Hi i need help with you guys, because i have a problem since today.

Let me show you my sistem first:

E8400
P5N-E SLI (Bios 1101)
Ram 2 X 2Gb Exceleram PC6400 5-5-5-15-23

Untill yesterday i was able to OC easily my CPU to 3.6 Ghz with Vcore 1.225 with 1 x 1Gb Kingston Value Ram PC5300 (667Mhz) but since the moment that i´ve installed the Exceleram (today) i cannot OC anymore, i go to bios, select FSB 400, select unlinked and save and after the restart the bios put again the FSB to stock settings, i don´t now what to do anymore but it´s obvious that is related with my new ram. What can i do?

Thank´s

groogster
do you not have the P5N32-E then? what chipset is it, 650i or 680i?
if its the 650i, then check out this thread http://www.overclock.net/intel-mothe...0i-thread.html
Edited by burning-skies - 9/4/08 at 1:55pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 4.4ghz ASrock Z68 Extreme4 gen 3 N/A Saving up ;) G.Skill RipjawsX 8GB 
Hard DriveOSMonitorKeyboard
OCZ 480gb SSD + Western 500Gb x 3 Windows 8.1 64 bit Samsung SM2232BW Logitech G15 
PowerCaseMouse
Coolermaster 1000w TT Armor Razer Diamondback 3G 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 4.4ghz ASrock Z68 Extreme4 gen 3 N/A Saving up ;) G.Skill RipjawsX 8GB 
Hard DriveOSMonitorKeyboard
OCZ 480gb SSD + Western 500Gb x 3 Windows 8.1 64 bit Samsung SM2232BW Logitech G15 
PowerCaseMouse
Coolermaster 1000w TT Armor Razer Diamondback 3G 
  hide details  
Reply
post #5175 of 5659
Quote:
Originally Posted by labeldave View Post
I can't read NB and SB temps in everest. It won't recognize my board.
The newer version of everest displays them correctly.
post #5176 of 5659
[QUOTE=burning-skies;4496256]what kind of cooling do you have on your NB, 1.65 is pretty high. i hope you manage to get 4.2 but i think its going to be a struggle

I have the evercool EV something. Most guys can hit 1.65 with a fan on the northbridge. I can get the system to boot up at 1800x9, but it errors on testing. It was really warm in my house too. I have 6 140mm fans in my case and plan on adding two more. I'm still doing alot of testing. Right now, 3.8 seems to be the most stable setting.
WORK IN PROGRESS
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4.45Ghz(1780X10) 1.42v P5N32-E 8800GT SLI x2 2x 2024 CRUCIAL BALLISTIX 890MHZ 5-5-5-15 2T 
Hard DriveOptical DriveOSMonitor
RAPTOR 74GB DVD R/W WINDOWS XP SCEPTRE 21" WIDE 
PowerCase
PCP&C QUAD 750W COOLERMASTER 590 
  hide details  
Reply
WORK IN PROGRESS
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4.45Ghz(1780X10) 1.42v P5N32-E 8800GT SLI x2 2x 2024 CRUCIAL BALLISTIX 890MHZ 5-5-5-15 2T 
Hard DriveOptical DriveOSMonitor
RAPTOR 74GB DVD R/W WINDOWS XP SCEPTRE 21" WIDE 
PowerCase
PCP&C QUAD 750W COOLERMASTER 590 
  hide details  
Reply
post #5177 of 5659
hmmm i think iv screwed my board.

i had my q6600 running at 3.6ghz and ram at 1120mhz 24/7 so i tried to go higher...

i managed to OC to 3.8ghz, that was fine then i tried booting with 4.0ghz, i used 1.55 on NB and around 1.54 in the bios for vcore,it got half way through booting then BSOD. i then cleared CMOS using the jumper,i tried to boot at FSB (QDR) 1600 with ram at 1066 to get back to 3.6 and it doesnt work.

after the restart on the bottom,it says system boot failure,last boot failed (or something similar),please load defaults and boot again.
it works fine on stock settings, but the thing is i can change the voltages of the vcore,NB and memory and boot into windows at stock speeds,and its still kept the increase in voltages.

i have tried reverting back to Bios 1404 then flashing back to 1503,i have cleared CMOS by removing the battery,was only out about 10seconds though.

and the memory stops at 800mhz i cant get it higher than that at all,even when i dont oc the cpu.

any ideas?

cheers
Edited by burning-skies - 9/6/08 at 1:00am
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 4.4ghz ASrock Z68 Extreme4 gen 3 N/A Saving up ;) G.Skill RipjawsX 8GB 
Hard DriveOSMonitorKeyboard
OCZ 480gb SSD + Western 500Gb x 3 Windows 8.1 64 bit Samsung SM2232BW Logitech G15 
PowerCaseMouse
Coolermaster 1000w TT Armor Razer Diamondback 3G 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 4.4ghz ASrock Z68 Extreme4 gen 3 N/A Saving up ;) G.Skill RipjawsX 8GB 
Hard DriveOSMonitorKeyboard
OCZ 480gb SSD + Western 500Gb x 3 Windows 8.1 64 bit Samsung SM2232BW Logitech G15 
PowerCaseMouse
Coolermaster 1000w TT Armor Razer Diamondback 3G 
  hide details  
Reply
post #5178 of 5659
anyone have any idea why my bios says 1.3 vcore, hwmonitor says 1.3 vcore, yet cpuz says 1.504 core voltage? cpuz is usually the most accuate, but im definitely not running this 8400 at 1.5v thats crazy talk. any clues?
Black Power
(13 items)
 
  
CPUMotherboardGraphicsRAM
QX6700 @ 3.52 EVGA 780i A1 XFX GTX260 c216 Black (740/1481/1200) 2x2gb Corsair Dominator 1066 @ 940 
Hard DriveOptical DriveOSMonitor
1tb WD Caviar Black,500gb WD Blue, 80gb Raptor 10k 2x DVD RW Vista x64 Home Premium 28" Hannspree 3ms LCD 
KeyboardPowerCaseMouse
Microsoft Comfort Curve 600w OCZ GameXstream Antec p180b Microsoft Black USB Optical 
Mouse Pad
lol 
  hide details  
Reply
Black Power
(13 items)
 
  
CPUMotherboardGraphicsRAM
QX6700 @ 3.52 EVGA 780i A1 XFX GTX260 c216 Black (740/1481/1200) 2x2gb Corsair Dominator 1066 @ 940 
Hard DriveOptical DriveOSMonitor
1tb WD Caviar Black,500gb WD Blue, 80gb Raptor 10k 2x DVD RW Vista x64 Home Premium 28" Hannspree 3ms LCD 
KeyboardPowerCaseMouse
Microsoft Comfort Curve 600w OCZ GameXstream Antec p180b Microsoft Black USB Optical 
Mouse Pad
lol 
  hide details  
Reply
post #5179 of 5659
just go off what hwmonitor says,or try everest. CPUZ all ways gives false readings, it showed me 1.60 on my q66 but it was only at 1.4 lol. dont use it to read voltages

simple!
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 4.4ghz ASrock Z68 Extreme4 gen 3 N/A Saving up ;) G.Skill RipjawsX 8GB 
Hard DriveOSMonitorKeyboard
OCZ 480gb SSD + Western 500Gb x 3 Windows 8.1 64 bit Samsung SM2232BW Logitech G15 
PowerCaseMouse
Coolermaster 1000w TT Armor Razer Diamondback 3G 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @ 4.4ghz ASrock Z68 Extreme4 gen 3 N/A Saving up ;) G.Skill RipjawsX 8GB 
Hard DriveOSMonitorKeyboard
OCZ 480gb SSD + Western 500Gb x 3 Windows 8.1 64 bit Samsung SM2232BW Logitech G15 
PowerCaseMouse
Coolermaster 1000w TT Armor Razer Diamondback 3G 
  hide details  
Reply
post #5180 of 5659
cpu-z seems to read vtt voltage. I don't trust it either. Go by the voltage reading in the voltage monitor in your bios.

I too have difficulties getting my ram over 800. Unless I set everything to stock. Really wierd.
WORK IN PROGRESS
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4.45Ghz(1780X10) 1.42v P5N32-E 8800GT SLI x2 2x 2024 CRUCIAL BALLISTIX 890MHZ 5-5-5-15 2T 
Hard DriveOptical DriveOSMonitor
RAPTOR 74GB DVD R/W WINDOWS XP SCEPTRE 21" WIDE 
PowerCase
PCP&C QUAD 750W COOLERMASTER 590 
  hide details  
Reply
WORK IN PROGRESS
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4.45Ghz(1780X10) 1.42v P5N32-E 8800GT SLI x2 2x 2024 CRUCIAL BALLISTIX 890MHZ 5-5-5-15 2T 
Hard DriveOptical DriveOSMonitor
RAPTOR 74GB DVD R/W WINDOWS XP SCEPTRE 21" WIDE 
PowerCase
PCP&C QUAD 750W COOLERMASTER 590 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N32-E Overclocking Guide