Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N32-E Overclocking Guide
New Posts  All Forums:Forum Nav:

Asus P5N32-E Overclocking Guide - Page 63

post #621 of 5659
Yeah my revision 2 6400 runs good at 2.2v 4-4-4-12 all the way up to 900MHz. I had to relax to 5-5-5-15 for 960MHz though.

As long as your are running at 1:1 you wont have any problems running at 4-4-4-12.

And as for the vcore you just have to knock it down a notch and stress test and see if you are stable and find the lowest stable per your OC.
post #622 of 5659
when im uping the fsb i set it to linked and sync mode as it looks about the most acurate am i right ? as opposed to settng 1:1 or 5:4
Rich Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N32-e SLI Evga 8800GTX 2gb OCZ pc6400 rev2 XTC 
Hard DriveOptical DriveOSMonitor
2x 500gb spinpoints Raid 0 samsung 18x sata dvd burner XP Lg 19" tft 
KeyboardPowerCaseMouse Pad
g15 Seasonic S12 500w coolermaster Ammo 552 ss steal 
  hide details  
Reply
Rich Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N32-e SLI Evga 8800GTX 2gb OCZ pc6400 rev2 XTC 
Hard DriveOptical DriveOSMonitor
2x 500gb spinpoints Raid 0 samsung 18x sata dvd burner XP Lg 19" tft 
KeyboardPowerCaseMouse Pad
g15 Seasonic S12 500w coolermaster Ammo 552 ss steal 
  hide details  
Reply
post #623 of 5659
Yup linked and synced is good to go.
post #624 of 5659
right just had to rule that out as a problem, theres no better way of doing it then ? unlinked maybe ? or do you end up setting the same settings just manually

sounds like im doin everything alright im just not getting stable results
Rich Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N32-e SLI Evga 8800GTX 2gb OCZ pc6400 rev2 XTC 
Hard DriveOptical DriveOSMonitor
2x 500gb spinpoints Raid 0 samsung 18x sata dvd burner XP Lg 19" tft 
KeyboardPowerCaseMouse Pad
g15 Seasonic S12 500w coolermaster Ammo 552 ss steal 
  hide details  
Reply
Rich Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N32-e SLI Evga 8800GTX 2gb OCZ pc6400 rev2 XTC 
Hard DriveOptical DriveOSMonitor
2x 500gb spinpoints Raid 0 samsung 18x sata dvd burner XP Lg 19" tft 
KeyboardPowerCaseMouse Pad
g15 Seasonic S12 500w coolermaster Ammo 552 ss steal 
  hide details  
Reply
post #625 of 5659
You can try it unlinked and then just raise the cpu fsb and set the mem to 800 just to make sure it's not holding your oc back. Since you aren't going over 400mhz unless you go past 3.6ghz or you drop the multiplier this wont help you much.
post #626 of 5659
the mems at 700 somefink which isnt that high 800 will be a higher setting is that going to be more stable then ?
Rich Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N32-e SLI Evga 8800GTX 2gb OCZ pc6400 rev2 XTC 
Hard DriveOptical DriveOSMonitor
2x 500gb spinpoints Raid 0 samsung 18x sata dvd burner XP Lg 19" tft 
KeyboardPowerCaseMouse Pad
g15 Seasonic S12 500w coolermaster Ammo 552 ss steal 
  hide details  
Reply
Rich Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N32-e SLI Evga 8800GTX 2gb OCZ pc6400 rev2 XTC 
Hard DriveOptical DriveOSMonitor
2x 500gb spinpoints Raid 0 samsung 18x sata dvd burner XP Lg 19" tft 
KeyboardPowerCaseMouse Pad
g15 Seasonic S12 500w coolermaster Ammo 552 ss steal 
  hide details  
Reply
post #627 of 5659
I doubt it will be more stable. It doesn't usually hurt to underclock it. You can just lock it to 800 if you like. Myself, and a few others, stand behind linked and synced being the best way to go.
post #628 of 5659
Thread Starter 
The commando will get a higher fsb. The difference is that you have a full 16x16x SLI motherboard wheras the commando is not suited to dual card of nvidia or ati. Regarding your limits, I assume you went through my guide and upped all the other voltages in addition to vcore? Cpu vtt is the most importantant and should be maxed out at 1.55

What multi/fsb are you running at?
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 6800K Asus X99-A II Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Quad  
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Corsair H100i V2 - w/ML120 Pro Fans Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Steelseries Merc  EVGA Supernova G2 1000W Corsair 450D Mionix Naos 8200 
Mouse PadAudioAudioOther
Inwin Batmat Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 6800K Asus X99-A II Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Quad  
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Corsair H100i V2 - w/ML120 Pro Fans Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Steelseries Merc  EVGA Supernova G2 1000W Corsair 450D Mionix Naos 8200 
Mouse PadAudioAudioOther
Inwin Batmat Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
post #629 of 5659
Great guide Robilar, I'm in the process of another build (waiting on parts to come in) a P5N32-E SLI and another E6600 and wanted to know how much a difference in temp do you get from stock north/southbridge setups to using 2 Thermaltake Extreme Spirit II on them?
And will this board take PC8500 mem?
Thanks
post #630 of 5659
Quote:
Originally Posted by Robilar View Post
The commando will get a higher fsb. The difference is that you have a full 16x16x SLI motherboard wheras the commando is not suited to dual card of nvidia or ati. Regarding your limits, I assume you went through my guide and upped all the other voltages in addition to vcore? Cpu vtt is the most importantant and should be maxed out at 1.55

What multi/fsb are you running at?


i posted this a few posts back it shows what i have set everything too
Rich Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N32-e SLI Evga 8800GTX 2gb OCZ pc6400 rev2 XTC 
Hard DriveOptical DriveOSMonitor
2x 500gb spinpoints Raid 0 samsung 18x sata dvd burner XP Lg 19" tft 
KeyboardPowerCaseMouse Pad
g15 Seasonic S12 500w coolermaster Ammo 552 ss steal 
  hide details  
Reply
Rich Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N32-e SLI Evga 8800GTX 2gb OCZ pc6400 rev2 XTC 
Hard DriveOptical DriveOSMonitor
2x 500gb spinpoints Raid 0 samsung 18x sata dvd burner XP Lg 19" tft 
KeyboardPowerCaseMouse Pad
g15 Seasonic S12 500w coolermaster Ammo 552 ss steal 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N32-E Overclocking Guide