Thanks for the help so far Muncher,
my cpu is Q702A540
guess i'll buy one more cheap cooler to the lateral of my case, that will result in a total 3 coolers, 1 front 1 back and 1 left. and then a good cooler like thermaltake or such to replace teh stock cpu cooler.
until then, i'll keep running at 3.1ghz... i just ran orthos for 20 minutes no probs. mult x9. vcore 1.375.
coretemp was reading 68-72c in the last minutes, turned it off and measured with speedfan, about 15 c cooler extacly.
did not understand this Tjunction thing yet, tho.
guess theres no BIG problem in running it at this temp for 1 week until i get a cooler, huh?
adjusted the offsets in speedfan, yet from what ive read here:
the Tcase and Core0 at idle should be about 15c different, yet mine are only bout 3c
what does this means? core 0 and core 1 are with +15 offset in speedfan, Tcase is not... perhaps im getting the wrong temp, cause theres three temps my speedfan reads, temp1, temp2, and temp3.. i took the hotter, temp2. well, whatever, tcase doesnt matter much from what i understood, specially if the hottest temp i get for it is 45c, and the others are 35 and 30.
now for tjunction, which it seems to be core0 and core1, but principally core0, in SpeedFan and Coretemp now im getting the exact same measures, 69~72c with orthos, 46c idle.
i'll reset to defaults in the bios and take a look at the temps, and then try a 1.33v 375x8 to achieve a safe 3ghz while i dont put my hands on some thermaltake monster >=D