Originally Posted by Robilar
With your chip, I would start vcore at 1.4, set ram to unlinked, cpu vtt to 1.55. Stay at 9x multi and start at 350 FSB. Work way up in 10mhz increments.
1.2VHT to 1.35
NB voltage to 1.4 (may have to raise this to 1.45)
SB voltage at 1.5 (no higher)
Make certain your ram voltage is manually set to 2.1V even if its not overclocked (which it shouldn't be at this point)
If its not stable keep increasing vcore up to a max of 1.45 (you can increase it higher but watch your temps). I've taken my vcore up to 1.55 but temps are insane on air at that point.
Thanks for your help robilar, tried these setting and with VCORE set to 1.45 it wouldnt get past the windows loading screen, set to 1.5 i managed to run windows and get to my desktop but when i ran orthos i got the BSOD.
Any ideas, no point putting my vcore up to 1.5 but it really doesnt wanna work on those settings, strange coz when i run at 3.5 ghz its perfectly stable and cpu idle temp is only 34 degrees C, maybe my chip just wont do 3.6 allthough i find it hard to beleive coz im getting 3.5 and the processor aint even sweating.