Overclock.net › Forums › Cooling › Water Cooling › First WC setup
New Posts  All Forums:Forum Nav:

First WC setup

post #1 of 13
Thread Starter 
Would This Work?

Pump - http://www.sidewindercomputers.com/swmc12vdcpu.html
Reservoir - http://www.crazypc.com/products/93310.html
CPU BLOCK - http://www.sidewindercomputers.com/swapexpebl.html
Rad - http://www.sidewindercomputers.com/swmcqupo3xbl.html
Tubbing 10FT - http://www.sidewindercomputers.com/ty3id1odlatu.html
Fans 3x120mm - http://www.newegg.com/Product/Produc...82E16835221013

ADDED in everything.
    
CPUMotherboardGraphicsRAM
Intel i7-4790k @ Stock ASrock Fatal1ty Z97 Killer 2x XFX 6950 Unlocked HyperX Savage 2x8GB 
Hard DriveCoolingOSMonitor
250GB Crucial MX200 Corsair H100i V2 Windows 10 64-bit Crossover 2795 QHD 
KeyboardPowerCaseAudio
CM Quickfire TK EVGA P2 1000w Corsair Carbide 240 JDS Labs cMoy BB/Fiio E10 + HD 598/Q701 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i7-4790k @ Stock ASrock Fatal1ty Z97 Killer 2x XFX 6950 Unlocked HyperX Savage 2x8GB 
Hard DriveCoolingOSMonitor
250GB Crucial MX200 Corsair H100i V2 Windows 10 64-bit Crossover 2795 QHD 
KeyboardPowerCaseAudio
CM Quickfire TK EVGA P2 1000w Corsair Carbide 240 JDS Labs cMoy BB/Fiio E10 + HD 598/Q701 
  hide details  
Reply
post #2 of 13
Yup, don't forget tubing, clamps, and fans. Also, measure and figure out your layout before ordering.
Once again...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 [4.28GHz, HT] Asus P6T + Broadcom NetXtreme II VisionTek HD5850 [900/1200] + Galaxy GT240 2x4GB G.Skill Ripjaw X [1632 MHz] 
Hard DriveOSMonitorKeyboard
Intel X25-M 160GB + 3xRAID0 500GB 7200.12 Window 7 Pro 64 Acer H243H + Samsung 226BW XARMOR-U9BL  
PowerCaseMouseMouse Pad
Antec Truepower New 750W Li Lian PC-V2100 [10x120mm fans] Logitech G9 X-Trac Pro 
  hide details  
Reply
Once again...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 [4.28GHz, HT] Asus P6T + Broadcom NetXtreme II VisionTek HD5850 [900/1200] + Galaxy GT240 2x4GB G.Skill Ripjaw X [1632 MHz] 
Hard DriveOSMonitorKeyboard
Intel X25-M 160GB + 3xRAID0 500GB 7200.12 Window 7 Pro 64 Acer H243H + Samsung 226BW XARMOR-U9BL  
PowerCaseMouseMouse Pad
Antec Truepower New 750W Li Lian PC-V2100 [10x120mm fans] Logitech G9 X-Trac Pro 
  hide details  
Reply
post #3 of 13
Sure, just don't forget some barb fitting to fit in the rad and maybe 8-10' of tubing:

http://www.sidewindercomputers.com/ty7id5odlatu.html

http://www.petrastechshop.com/3np1odthhoba.html

Oh and some fans too. For a CPU only loop and having a triple rad, if mounted with good cool air intake, you could go with some low speed fans.

These are inexpensive, but move decent air:
http://www.petrastechshop.com/12yalod1cafa.html

If you were adding some GPU block later to you're loop you might consider some better 120x38mm type fan like this:
http://www.petrastechshop.com/12x38sukddob.html

You could also replace the reservoir with a T-line. I ended up pulling my reservoir out and like my T-line better.
    
CPUMotherboardGraphicsRAM
3930K ASrock X79 Ext7 Evga GTX570 CORSAIR Vengeance 16GB 
Hard DriveOptical DriveOSMonitor
Phoenix SSD+2TB Seagate drives ASUS DVD-RW combo Windows 7 28" Hanns-G HZ281 
KeyboardPowerCaseMouse
MS Natural Corsair TX650 Danger Den Torture Rack Logitech MX518 
Mouse Pad
Desk 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
3930K ASrock X79 Ext7 Evga GTX570 CORSAIR Vengeance 16GB 
Hard DriveOptical DriveOSMonitor
Phoenix SSD+2TB Seagate drives ASUS DVD-RW combo Windows 7 28" Hanns-G HZ281 
KeyboardPowerCaseMouse
MS Natural Corsair TX650 Danger Den Torture Rack Logitech MX518 
Mouse Pad
Desk 
  hide details  
Reply
post #4 of 13
Thread Starter 
Quote:
Originally Posted by Martinm210 View Post
Sure, just don't forget some barb fitting to fit in the rad and maybe 8-10' of tubing:

http://www.sidewindercomputers.com/ty7id5odlatu.html

http://www.petrastechshop.com/3np1odthhoba.html

Oh and some fans too. For a CPU only loop and having a triple rad, if mounted with good cool air intake, you could go with some low speed fans.

These are inexpensive, but move decent air:
http://www.petrastechshop.com/12yalod1cafa.html

If you were adding some GPU block later to you're loop you might consider some better 120x38mm type fan like this:
http://www.petrastechshop.com/12x38sukddob.html

You could also replace the reservoir with a T-line. I ended up pulling my reservoir out and like my T-line better.
Thanks alot
    
CPUMotherboardGraphicsRAM
Intel i7-4790k @ Stock ASrock Fatal1ty Z97 Killer 2x XFX 6950 Unlocked HyperX Savage 2x8GB 
Hard DriveCoolingOSMonitor
250GB Crucial MX200 Corsair H100i V2 Windows 10 64-bit Crossover 2795 QHD 
KeyboardPowerCaseAudio
CM Quickfire TK EVGA P2 1000w Corsair Carbide 240 JDS Labs cMoy BB/Fiio E10 + HD 598/Q701 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i7-4790k @ Stock ASrock Fatal1ty Z97 Killer 2x XFX 6950 Unlocked HyperX Savage 2x8GB 
Hard DriveCoolingOSMonitor
250GB Crucial MX200 Corsair H100i V2 Windows 10 64-bit Crossover 2795 QHD 
KeyboardPowerCaseAudio
CM Quickfire TK EVGA P2 1000w Corsair Carbide 240 JDS Labs cMoy BB/Fiio E10 + HD 598/Q701 
  hide details  
Reply
post #5 of 13
Yeah that all should work fine, but you're still going to need clamps as Duckie said and you might want to buy some fittings. These fittings should work nicely.

And you're probably going to want to buy some coolant as well, most people use Swiftech HydrX, but Pentosin G11 and Pentosin G12 are also good if you want a blue or red dye. You're also going to want to buy Petra'sTech PTNuke to put into your loop.

For fans, you should buy a few Yate Loons instead, they perform almost the same (the Yate Loons actually have a little better dBA/CFM ratio) and they only cost $3.50 each!
College Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 920 D0 | 3.5GHz @ 1.075v 24/7 EVGA x58 SLI LE EVGA GTX 275 3 x 2 GB OCZ DDR3 1600 XMP 
Hard DriveOSMonitorKeyboard
2 x 640 GB WD Caviar Black Microsoft Vista Ultimate Hanns-G HG-281DPB 28-Inch Logitech G15 
PowerCaseMouseMouse Pad
Corsair 750TX Coolermaster ATCS 840 Logiech G5 Func mousepad 
  hide details  
Reply
College Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 920 D0 | 3.5GHz @ 1.075v 24/7 EVGA x58 SLI LE EVGA GTX 275 3 x 2 GB OCZ DDR3 1600 XMP 
Hard DriveOSMonitorKeyboard
2 x 640 GB WD Caviar Black Microsoft Vista Ultimate Hanns-G HG-281DPB 28-Inch Logitech G15 
PowerCaseMouseMouse Pad
Corsair 750TX Coolermaster ATCS 840 Logiech G5 Func mousepad 
  hide details  
Reply
post #6 of 13
Are you planning on getting the 3/8'' ID tubing? With all that stuff you're getting, I would suggest the thicker 1/2'' ID tubing, it might decrease temps by another 2-3C.

None-the-less, it looks like a good setup to me.
Mini Trendy
(0 items)
  
Reply
Mini Trendy
(0 items)
  
Reply
post #7 of 13
Thread Starter 
Yeah i wana use 1/2" and how many clamps should i get? i have no clue
    
CPUMotherboardGraphicsRAM
Intel i7-4790k @ Stock ASrock Fatal1ty Z97 Killer 2x XFX 6950 Unlocked HyperX Savage 2x8GB 
Hard DriveCoolingOSMonitor
250GB Crucial MX200 Corsair H100i V2 Windows 10 64-bit Crossover 2795 QHD 
KeyboardPowerCaseAudio
CM Quickfire TK EVGA P2 1000w Corsair Carbide 240 JDS Labs cMoy BB/Fiio E10 + HD 598/Q701 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i7-4790k @ Stock ASrock Fatal1ty Z97 Killer 2x XFX 6950 Unlocked HyperX Savage 2x8GB 
Hard DriveCoolingOSMonitor
250GB Crucial MX200 Corsair H100i V2 Windows 10 64-bit Crossover 2795 QHD 
KeyboardPowerCaseAudio
CM Quickfire TK EVGA P2 1000w Corsair Carbide 240 JDS Labs cMoy BB/Fiio E10 + HD 598/Q701 
  hide details  
Reply
post #8 of 13
Quote:
Originally Posted by Lemondrips View Post
Yeah i wana use 1/2" and how many clamps should i get? i have no clue
Each part you listed will require 2 clamps. So, you'll need around 12, but I would get about 20 just in case.

You might want to pick up a little thing of zip ties as well, just in case you can't easily get clamps on something, you can just use the zip ties.
Mini Trendy
(0 items)
  
Reply
Mini Trendy
(0 items)
  
Reply
post #9 of 13
One for each barb, so thats 8?
zoso
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (3.96ghz) DFI LP DK P35 EVGA GTX 285 (710/1325) GSkill 4gb DDR2 
Hard DriveOSMonitorKeyboard
2 x Vraptors Raid 0 Vista 64 V2400W Logitech G15 
PowerCaseMouseMouse Pad
620HX TJ07 Diamondback Steel 
  hide details  
Reply
zoso
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (3.96ghz) DFI LP DK P35 EVGA GTX 285 (710/1325) GSkill 4gb DDR2 
Hard DriveOSMonitorKeyboard
2 x Vraptors Raid 0 Vista 64 V2400W Logitech G15 
PowerCaseMouseMouse Pad
620HX TJ07 Diamondback Steel 
  hide details  
Reply
post #10 of 13
Quote:
Originally Posted by imnotzoso View Post
One for each barb, so thats 8?
Yeah haha, I counted the tubing link as well. . . <--- I is nub haha
Mini Trendy
(0 items)
  
Reply
Mini Trendy
(0 items)
  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › First WC setup