Originally Posted by mhw100
Yes it looks fantastic...I'm beginning to change my mind!
What CFM fan speeds are you talking to make the 480 beat the 120.3? Somehting like 2000 vs 1200?
What about moving everything outside of the case e.g res, rad and pump and putting them on a base or stand?
That Stinger has got to make sense on the Quad just the fact of more water movement surely must be better. I wonder if anyone has tested in against another block?
Its in the process, i forgot who is doing a show-down between the Fuzion,Stinker-V8 and Apogee GT i believe.
Everyting putside the PC is a good idea, it will cool everyting better and take advantage of the cooler room temps, than the temps inside the pc.
But also not that moving your WC system outside might make you use some more tubing, and there for might decrease the flowrate of your loop.
But i dont think that should be too much of a problem if its close to your PC.
you can put it in one of these if you like:
$70 for the caseing, thats if you get the PA.120.3, the 480GTX wont fit in there, you can make it fit though
I dont know the exact CMF but im assuming lower=0-55CMF and higher is 55 and above.
I use CMF and not RPM becasue it varies from fan to fan, CMF is a better base yo use since it can be applied to all fans regardless of RPM.