1- The BIX is a good rad I really like them...You need to use 100+cfm fans on them..Look at Sidewinders they may be cheaper there...
These are the fans I used on mine they worked great...
2-That is fine for a single block loop...Swifty cam out with a new one thats a
little cheaper it doesn't have a rheo on it and runs full blast all the time..
Everyone leaves them on the 5 or highest setting anyway it will save a
couple of bux.....
Swiftech MCP655-B 12v DC Pump w/o Speed Controller
This is a new little pump that would work well for a CPU only loop..CD is having pretty good luck with one using a Fuzion..He has a recent thread here about it...
dB-1 Compact 12v Pump
3- I like the Masterkleer 7/16x5/8" tubing it flows about as well as the full 1/2"
and is easier to route around in your case...Its cheaper to...
I don't know about that coolant..This is what I use...I add about an ounce
and a half of glycerin for every 40 ounces of mix..It helps the thermal
transfer of the coolant...
Blue UV Reactive Pentosin
4-Res is fine I like them because they bleed fast...A T-Line is good to and
would be a little cheaper they just take longer to bleed...
Here is some good stuff to read...
Assembling your Custom Watercooling Setup - Overclock.net - Overclocking.net
Bleeding my WC setup... - Overclock.net - Overclocking.net
PC Water Coolant Chemistry - Part I
Poll: Push or pull configuration for Radiators - Page 2 - Overclock.net - Overclocking.net
How To: Build A Performance Shroud - Overclock.net - Overclocking.net
D-Tek Fuzion install tip! - (Or why you should clean your new block)...