Overclock.net › Forums › Graphics Cards › AMD/ATI › x1950xt and x1950xtx users I can use your help and opinions.
New Posts  All Forums:Forum Nav:

x1950xt and x1950xtx users I can use your help and opinions.

post #1 of 6
Thread Starter 
I'm hoping to get some users who are using faster then 702/1035 for there card and see how it compares to these speeds with some memory tweaks. right now that is the highest I can go so was left with tweaking the memory timings. so those of you who can get higher please if you will download my atitools profile and use it to see how it compares to your faster core/mem profile and see which makes more of a difference to speeds.

all you need to do is make a copy of your profile.ini in atitools folder.right click and "save as" the profile I have attached to your atitools directory. change the extention to .ini rather then .txt and then load the mine tight mem speeds, and then click on mem and then load mine tight mem. my volts are 1.525/2.201/2.201/1.528. and has scored me 7528 in 3dmark06

for users of non 1950xt/xtx cards you can try but no promise as to safety of your card on this. as always be safe as I can not take responsibity for your card but these are the settings I use so you should be ok for the xt and xtx users if you wanna give them a shot to see if they might help you out


also hoping others can share there profiles for use as well. even more so if yo ucan get over 702/1035. just list your 3dmard06 scores and voltages for so others know what they would get into with the profile.
compy jr
(13 items)
 
  
CPUMotherboardGraphicsHard Drive
xeon 3350 at 3.6ghz Asus P5k-dlx HIS 7970 @ 1150/1900 Lots of them.  
OSMonitorKeyboardPower
vista ultimate x64/xp sp3 compaq 21" junk dell keyboard corsair tx850m 
CaseMouseMouse Pad
upgraded metal box You don't need a mouse Desk 
  hide details  
Reply
compy jr
(13 items)
 
  
CPUMotherboardGraphicsHard Drive
xeon 3350 at 3.6ghz Asus P5k-dlx HIS 7970 @ 1150/1900 Lots of them.  
OSMonitorKeyboardPower
vista ultimate x64/xp sp3 compaq 21" junk dell keyboard corsair tx850m 
CaseMouseMouse Pad
upgraded metal box You don't need a mouse Desk 
  hide details  
Reply
post #2 of 6
I got the same card as you and im on 681 on the core and 1008 on the mem. i score 6,734 in 3dmark06. But my volts are:

Vcore: 1.425
MVDDC: 2.184
MVDDQ: 2.184
VDDCI: 1.486

where did you get yours volts of "1.525/1.201/1.201/1.528" ?? i mean 1.201? you sure you didnt mean 2.201? Also what are your memory timings set at?

*EDIT* tried your profile, i only get 6,902 in 06. the mem timings stay at default.

*EDIT 2* nevermind i didnt load the timings manually. im redoing 3dmark

*EDIT 3* I get artifacts with your mem timings.
Clevo P650RP6-G
(6 items)
 
  
CPUGraphicsRAMHard Drive
Intel i7 6700HQ nVidia GTX1060 6GB Kingston HyperX Impact 2133MHZ 16GB INTEL 600p 128GB 
Hard DriveOS
Samsung 850 EVO 1TB Windows 10 Pro 64 
  hide details  
Reply
Clevo P650RP6-G
(6 items)
 
  
CPUGraphicsRAMHard Drive
Intel i7 6700HQ nVidia GTX1060 6GB Kingston HyperX Impact 2133MHZ 16GB INTEL 600p 128GB 
Hard DriveOS
Samsung 850 EVO 1TB Windows 10 Pro 64 
  hide details  
Reply
post #3 of 6
Thread Starter 
mine was running good for for long enough to do the 3dmark but I actually tried to play a game and noticed the same thing. will try to loosen them up a tad as they are very agressive compared to stock mem timings. and some of the extra agressiveness I did with the timings seemed to cause little to no change in performance.
just curious what kind of artifacts are you getting. line shooting out from the middle based. fuzzy dot based, or just random shapes out of nowhere

you where right 2.201v sorry will edit op.
compy jr
(13 items)
 
  
CPUMotherboardGraphicsHard Drive
xeon 3350 at 3.6ghz Asus P5k-dlx HIS 7970 @ 1150/1900 Lots of them.  
OSMonitorKeyboardPower
vista ultimate x64/xp sp3 compaq 21" junk dell keyboard corsair tx850m 
CaseMouseMouse Pad
upgraded metal box You don't need a mouse Desk 
  hide details  
Reply
compy jr
(13 items)
 
  
CPUMotherboardGraphicsHard Drive
xeon 3350 at 3.6ghz Asus P5k-dlx HIS 7970 @ 1150/1900 Lots of them.  
OSMonitorKeyboardPower
vista ultimate x64/xp sp3 compaq 21" junk dell keyboard corsair tx850m 
CaseMouseMouse Pad
upgraded metal box You don't need a mouse Desk 
  hide details  
Reply
post #4 of 6
hey the artifcats i get are in atitool i get yellow dots/clumps. in 3dmark i got massive lines shooting off the characters ect
Clevo P650RP6-G
(6 items)
 
  
CPUGraphicsRAMHard Drive
Intel i7 6700HQ nVidia GTX1060 6GB Kingston HyperX Impact 2133MHZ 16GB INTEL 600p 128GB 
Hard DriveOS
Samsung 850 EVO 1TB Windows 10 Pro 64 
  hide details  
Reply
Clevo P650RP6-G
(6 items)
 
  
CPUGraphicsRAMHard Drive
Intel i7 6700HQ nVidia GTX1060 6GB Kingston HyperX Impact 2133MHZ 16GB INTEL 600p 128GB 
Hard DriveOS
Samsung 850 EVO 1TB Windows 10 Pro 64 
  hide details  
Reply
post #5 of 6
Thread Starter 
if it's just the random shooting off the edges of object and not directly from the center find the timings that read 30 and try bumping them up to 35. I beleive I have it 5-5-9-9-5 or something like that. change them all 9 for the first 5. at work so I might be mistaken but that is the best I can come up with right now as it seemed to do the same for me.

try to change the ones from 30 to 35 first without touching the first 5 timings. if that doesn't work then change teh 5-5-9-9-5 to 9-9-9-9-9
compy jr
(13 items)
 
  
CPUMotherboardGraphicsHard Drive
xeon 3350 at 3.6ghz Asus P5k-dlx HIS 7970 @ 1150/1900 Lots of them.  
OSMonitorKeyboardPower
vista ultimate x64/xp sp3 compaq 21" junk dell keyboard corsair tx850m 
CaseMouseMouse Pad
upgraded metal box You don't need a mouse Desk 
  hide details  
Reply
compy jr
(13 items)
 
  
CPUMotherboardGraphicsHard Drive
xeon 3350 at 3.6ghz Asus P5k-dlx HIS 7970 @ 1150/1900 Lots of them.  
OSMonitorKeyboardPower
vista ultimate x64/xp sp3 compaq 21" junk dell keyboard corsair tx850m 
CaseMouseMouse Pad
upgraded metal box You don't need a mouse Desk 
  hide details  
Reply
post #6 of 6
arrrgh, in ati tool, when i load the profile it doesnt auto load the extra volts, any way to make it do that?

*edit* changed the timings to 9-9-9-9-9-35 but still get artifacts when i use the "scan for artifacts" in atitool

*edit* also get the same artifacts in 3dmark, even when i lower the core to 688 from 702
Clevo P650RP6-G
(6 items)
 
  
CPUGraphicsRAMHard Drive
Intel i7 6700HQ nVidia GTX1060 6GB Kingston HyperX Impact 2133MHZ 16GB INTEL 600p 128GB 
Hard DriveOS
Samsung 850 EVO 1TB Windows 10 Pro 64 
  hide details  
Reply
Clevo P650RP6-G
(6 items)
 
  
CPUGraphicsRAMHard Drive
Intel i7 6700HQ nVidia GTX1060 6GB Kingston HyperX Impact 2133MHZ 16GB INTEL 600p 128GB 
Hard DriveOS
Samsung 850 EVO 1TB Windows 10 Pro 64 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › x1950xt and x1950xtx users I can use your help and opinions.