Overclock.net › Forums › AMD › AMD CPUs › The Official Socket 754 Overclocker's Thread
New Posts  All Forums:Forum Nav:

The Official Socket 754 Overclocker's Thread - Page 32

post #311 of 677
well i just broke the 2.6ghz barrier with the newcastle. 1.63v is what it took.

No matter what i did, my venice would NOT go higher than 2.6 and that was only if room temp was below 50F my computer would IDLE at 55F at that point. I think it's just the stepping i have doesn't do well. But that's ok. I'm gonna see how far this newcastle will go.

btw, this newcastle stepping is LBAZC it took 1.68v to get it up to 2.64ghz, and i'm gonna see how much higher it'll go. right now it's idling at 47c, but it should drop down to around 45 once the thermal compound cures.
Taiga's 2nd wind
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6600K Gigabyte GA-Z170XP-SLI Gigabyte GTX 970 G1 Gaming G.Skill Ripjaws V series 
Hard DriveHard DriveCoolingOS
Western Digital 1TB HDD Mushkin Enhanced Eco2 SSD Silverstone TD02-Lite Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Acer G257HU Roccat Isku Corsair CX600M Antec P182 
MouseMouse Pad
Roccat Kone+ SteelSeries 
  hide details  
Reply
Taiga's 2nd wind
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6600K Gigabyte GA-Z170XP-SLI Gigabyte GTX 970 G1 Gaming G.Skill Ripjaws V series 
Hard DriveHard DriveCoolingOS
Western Digital 1TB HDD Mushkin Enhanced Eco2 SSD Silverstone TD02-Lite Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Acer G257HU Roccat Isku Corsair CX600M Antec P182 
MouseMouse Pad
Roccat Kone+ SteelSeries 
  hide details  
Reply
post #312 of 677
Sweet, watch that vcore though
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
post #313 of 677
Quote:
Originally Posted by rx7racer View Post
You should be able to hit 2.5-2.6Ghz easy with that venice. I'd say it's your ram or mb holding you back from the higher fsb. If you drop your multi. to 9 and up your fsb to around 300Mhz using
about 1.42vcore-1.5vcore if you have good cooling.

And Newcastles oc'ed pretty well iirc.
Naw I'd say it's the Venice pre-clocked...LOL
PRONE
(19 items)
 
Cap't Crunch
(14 items)
 
 
CPUMotherboardGraphicsRAM
i7 3930k @ 5Ghz Msi X79A-GD45 Gigabyte Radeon 7950 Patriot Sector 7 
Hard DriveOptical DriveCoolingCooling
2xCorsair Force Series 3 Raid-0 LG DVDR/W Custom Water Loop Swiftech Apogee Drive II waterblock/pump 
CoolingCoolingOSMonitor
Swiftech MCRES-Micro Rev 2 Larkooler 240mm Rad server 2008 RC2 HP 2207HD 
KeyboardPowerCaseMouse
HP Classic wireless PC Power and Cooling Silencer Mk II 950W High P... NZXT Phantom...again lol HP Classic wireless 
Mouse PadAudioOther
MicroCenter Onboard TBA 
CPUMotherboardGraphicsRAM
2500k Maximus V Extreme Radeon 6950HD Avexir 
Hard DriveOptical DriveCoolingOS
Corsair Force 3 LG DVD RW Corsair H100i WIndowd 8.1 
MonitorKeyboardPowerCase
HP 2159M Logitech CX750M Cosair Carbide 540AIR 
MouseMouse Pad
logitech logitech 
  hide details  
Reply
PRONE
(19 items)
 
Cap't Crunch
(14 items)
 
 
CPUMotherboardGraphicsRAM
i7 3930k @ 5Ghz Msi X79A-GD45 Gigabyte Radeon 7950 Patriot Sector 7 
Hard DriveOptical DriveCoolingCooling
2xCorsair Force Series 3 Raid-0 LG DVDR/W Custom Water Loop Swiftech Apogee Drive II waterblock/pump 
CoolingCoolingOSMonitor
Swiftech MCRES-Micro Rev 2 Larkooler 240mm Rad server 2008 RC2 HP 2207HD 
KeyboardPowerCaseMouse
HP Classic wireless PC Power and Cooling Silencer Mk II 950W High P... NZXT Phantom...again lol HP Classic wireless 
Mouse PadAudioOther
MicroCenter Onboard TBA 
CPUMotherboardGraphicsRAM
2500k Maximus V Extreme Radeon 6950HD Avexir 
Hard DriveOptical DriveCoolingOS
Corsair Force 3 LG DVD RW Corsair H100i WIndowd 8.1 
MonitorKeyboardPowerCase
HP 2159M Logitech CX750M Cosair Carbide 540AIR 
MouseMouse Pad
logitech logitech 
  hide details  
Reply
post #314 of 677
Quote:
Originally Posted by rx7racer View Post
Sweet, watch that vcore though
what's the max safe limit for the Vcore? if i know that it might~ help a bit haha. 1.68is the maximum the mobo allows though. It seems stable enough at 2.6 right now, but to make it fully stable i had to up the vcore from 1.63 to 1.68

I wanted to see it's maximum load temperature, and i was SHOCKED. there was a 0-3C diffrence between the motherboard's CPU temp and the core temp. it peaks at 60c but averages 58c under full load. at idle there's a roughly 5C diffrence between the 2 sensors. when i had the venice, the diffrence was 10-12c, with it averaging on the core, about 56-57c and the motherboard showing about 45-47
I like this newcastle XP but it seems that both of my chips are stuck at a 400mhz limit with overclocking. I think it's a combination of the ram and the motherboard. The biostar board i have doesn't allow for incremental voltage increases, and bases it off a percentage.
Taiga's 2nd wind
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6600K Gigabyte GA-Z170XP-SLI Gigabyte GTX 970 G1 Gaming G.Skill Ripjaws V series 
Hard DriveHard DriveCoolingOS
Western Digital 1TB HDD Mushkin Enhanced Eco2 SSD Silverstone TD02-Lite Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Acer G257HU Roccat Isku Corsair CX600M Antec P182 
MouseMouse Pad
Roccat Kone+ SteelSeries 
  hide details  
Reply
Taiga's 2nd wind
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6600K Gigabyte GA-Z170XP-SLI Gigabyte GTX 970 G1 Gaming G.Skill Ripjaws V series 
Hard DriveHard DriveCoolingOS
Western Digital 1TB HDD Mushkin Enhanced Eco2 SSD Silverstone TD02-Lite Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Acer G257HU Roccat Isku Corsair CX600M Antec P182 
MouseMouse Pad
Roccat Kone+ SteelSeries 
  hide details  
Reply
post #315 of 677
Not sure exactly on the vcore for those, I've seen some around 1.75 but they were on water. Keep temps below 55c and you should be good, I would try and see where you get it stable with 1.63 vcore. Anybody else know for sure about the vcore??
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
post #316 of 677
i searched google a bit and 1.7-1.75 seems to be the limit. The temps will gradually go down, i just applied my arctic ceramique to it. I might re-do it and see if it goes any lower, but right now it's within it's safe limit of 70c. it's stable around 2.5ghz at 1.63v, and it runs about 5c cooler at idle if i remember (didn't run it long, i wanted to see what the max i could pull was, it seems that 2.64is the tops, can't boot any higher than that) the core temps between my venice and this newcastle is only about 2-4c so that leads me to belive that this time i did a better job on the thermal grease, since i'm pumping in the maximum voltage the motherboard will let it.
Taiga's 2nd wind
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6600K Gigabyte GA-Z170XP-SLI Gigabyte GTX 970 G1 Gaming G.Skill Ripjaws V series 
Hard DriveHard DriveCoolingOS
Western Digital 1TB HDD Mushkin Enhanced Eco2 SSD Silverstone TD02-Lite Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Acer G257HU Roccat Isku Corsair CX600M Antec P182 
MouseMouse Pad
Roccat Kone+ SteelSeries 
  hide details  
Reply
Taiga's 2nd wind
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6600K Gigabyte GA-Z170XP-SLI Gigabyte GTX 970 G1 Gaming G.Skill Ripjaws V series 
Hard DriveHard DriveCoolingOS
Western Digital 1TB HDD Mushkin Enhanced Eco2 SSD Silverstone TD02-Lite Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Acer G257HU Roccat Isku Corsair CX600M Antec P182 
MouseMouse Pad
Roccat Kone+ SteelSeries 
  hide details  
Reply
post #317 of 677
Does anyone else have a mobile s754? I have a Newark core s754, which I know is a mobile CPU, 3700+ (2.4GHz, 12x200)) with a SH-E5 stepping, and at 1.35v I'm making an educated guess its a low voltage CPU. So does anyone know much about these, or more specifically what they can do in terms of overclocking? My MB won't let me OC in any way, so right now I'm heavily considering either selling this CPU or buying a "new" MB on eBay... but just not sure what I should do. And the only reason I would sell it is because this is already a backup system for internet surfing, and I have a third potential system under a desk that has an Opty 146 sitting in it. So does anyone know much about mobile s754 CPUs, specifically Newark core?

EDIT: I guess this answers my question...
http://www.overclock.net/hardware/sh...2/cat/2/page/1

But it still begs me to ask what I should do with regards to choosing between the two CPU/systems... both are capable of about 3GHz (my Opty is a CAB2E), I'm using 2x512mb TCCD RAM, and whichever I use I'll be buying an OCing MB to accommodate. I'm leaning on the Opty because I can run my RAM dual channel, but...? Any thoughts?
    
CPUMotherboardGraphicsRAM
Phenom II 940 Foxconn Destroyer SLI EVGA GTX 295's (x2) 4x 2gb Geil EVO ONE DDR2-800 
Hard DriveOSMonitorPower
2x WD6400AAKS RAID-0 Vista Home Premium x64 25.5" LG W2600H-PF Enermax Revolution+85 1050W 
Case
Thermaltake Mozart TX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II 940 Foxconn Destroyer SLI EVGA GTX 295's (x2) 4x 2gb Geil EVO ONE DDR2-800 
Hard DriveOSMonitorPower
2x WD6400AAKS RAID-0 Vista Home Premium x64 25.5" LG W2600H-PF Enermax Revolution+85 1050W 
Case
Thermaltake Mozart TX 
  hide details  
Reply
post #318 of 677
Just felt like posting up my recent SuperPI results. I dropped it down to 1T timings to see if it'll run, and not only does it run, it knocked off 3 seconds from SuperPi. I think i might try tightening up the timings a bit more to make up for the loss of speed. As of right now, all the timings (2.5-3-3-8) are the stock timings. the command rate was dropped from 2T to 1T and it booted up no problem. Think i should try dipping the 8 down to a 6?

Current settings failed prime in 4 minutes. Dropped the voltage to 1.62 and dropped the fsb to 234. I also dropped it to 2.5-3-3-7. It's running quite a bit cooler now, which is what i believe crashed it last time. It completely fails to boot if i touch any of the other timings besides the tras and the command rate.
still not stable enough. raised it back to 2.5-3-3-8 and dropped the fsb to 232 I am however, keeping the 1T timing. changing any of the other timings made it too unstable and didn't make enough of a diffrence to be worth it
Taiga's 2nd wind
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6600K Gigabyte GA-Z170XP-SLI Gigabyte GTX 970 G1 Gaming G.Skill Ripjaws V series 
Hard DriveHard DriveCoolingOS
Western Digital 1TB HDD Mushkin Enhanced Eco2 SSD Silverstone TD02-Lite Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Acer G257HU Roccat Isku Corsair CX600M Antec P182 
MouseMouse Pad
Roccat Kone+ SteelSeries 
  hide details  
Reply
Taiga's 2nd wind
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6600K Gigabyte GA-Z170XP-SLI Gigabyte GTX 970 G1 Gaming G.Skill Ripjaws V series 
Hard DriveHard DriveCoolingOS
Western Digital 1TB HDD Mushkin Enhanced Eco2 SSD Silverstone TD02-Lite Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Acer G257HU Roccat Isku Corsair CX600M Antec P182 
MouseMouse Pad
Roccat Kone+ SteelSeries 
  hide details  
Reply
post #319 of 677

PRONE
(19 items)
 
Cap't Crunch
(14 items)
 
 
CPUMotherboardGraphicsRAM
i7 3930k @ 5Ghz Msi X79A-GD45 Gigabyte Radeon 7950 Patriot Sector 7 
Hard DriveOptical DriveCoolingCooling
2xCorsair Force Series 3 Raid-0 LG DVDR/W Custom Water Loop Swiftech Apogee Drive II waterblock/pump 
CoolingCoolingOSMonitor
Swiftech MCRES-Micro Rev 2 Larkooler 240mm Rad server 2008 RC2 HP 2207HD 
KeyboardPowerCaseMouse
HP Classic wireless PC Power and Cooling Silencer Mk II 950W High P... NZXT Phantom...again lol HP Classic wireless 
Mouse PadAudioOther
MicroCenter Onboard TBA 
CPUMotherboardGraphicsRAM
2500k Maximus V Extreme Radeon 6950HD Avexir 
Hard DriveOptical DriveCoolingOS
Corsair Force 3 LG DVD RW Corsair H100i WIndowd 8.1 
MonitorKeyboardPowerCase
HP 2159M Logitech CX750M Cosair Carbide 540AIR 
MouseMouse Pad
logitech logitech 
  hide details  
Reply
PRONE
(19 items)
 
Cap't Crunch
(14 items)
 
 
CPUMotherboardGraphicsRAM
i7 3930k @ 5Ghz Msi X79A-GD45 Gigabyte Radeon 7950 Patriot Sector 7 
Hard DriveOptical DriveCoolingCooling
2xCorsair Force Series 3 Raid-0 LG DVDR/W Custom Water Loop Swiftech Apogee Drive II waterblock/pump 
CoolingCoolingOSMonitor
Swiftech MCRES-Micro Rev 2 Larkooler 240mm Rad server 2008 RC2 HP 2207HD 
KeyboardPowerCaseMouse
HP Classic wireless PC Power and Cooling Silencer Mk II 950W High P... NZXT Phantom...again lol HP Classic wireless 
Mouse PadAudioOther
MicroCenter Onboard TBA 
CPUMotherboardGraphicsRAM
2500k Maximus V Extreme Radeon 6950HD Avexir 
Hard DriveOptical DriveCoolingOS
Corsair Force 3 LG DVD RW Corsair H100i WIndowd 8.1 
MonitorKeyboardPowerCase
HP 2159M Logitech CX750M Cosair Carbide 540AIR 
MouseMouse Pad
logitech logitech 
  hide details  
Reply
post #320 of 677
Nice overclock!

I'm trying something diffrent with mine. I'm running 1T 2.5-3-3-6 on the ram, and i dropped it down to 228 on the front side bus, so i could lower the voltage to 1.58 instead of 1.52 (stock) right now, full load is 53 (10c cooler than what i had it up at 2.58/2.6) i'm hoping it's more stable with the lower voltage and lower clock. after i find out how stable it is just like this, i'll start raising it up a little bit. I probably won't go higher than 2.55ghz. I do with i had 1 stick of ddr500 though
Taiga's 2nd wind
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6600K Gigabyte GA-Z170XP-SLI Gigabyte GTX 970 G1 Gaming G.Skill Ripjaws V series 
Hard DriveHard DriveCoolingOS
Western Digital 1TB HDD Mushkin Enhanced Eco2 SSD Silverstone TD02-Lite Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Acer G257HU Roccat Isku Corsair CX600M Antec P182 
MouseMouse Pad
Roccat Kone+ SteelSeries 
  hide details  
Reply
Taiga's 2nd wind
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6600K Gigabyte GA-Z170XP-SLI Gigabyte GTX 970 G1 Gaming G.Skill Ripjaws V series 
Hard DriveHard DriveCoolingOS
Western Digital 1TB HDD Mushkin Enhanced Eco2 SSD Silverstone TD02-Lite Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Acer G257HU Roccat Isku Corsair CX600M Antec P182 
MouseMouse Pad
Roccat Kone+ SteelSeries 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › The Official Socket 754 Overclocker's Thread