Silverstone Fan (I had one from awhile back).
Ok the adventure begins:
the following takes place at 2:45 this afternoon (We'll make it like an episode of 24)
Opened my coolermaster stacker, removed the motherboard tray and disassembled the motherboard and zalman fan (and removed wiring for the zalman fanmate)
3:15 (following takes place etc). Begin reading diagrams for the thermalright. looks like a piece of cake (always beware when this happens)
3:22 (got snack) Have to pick up daughter in half hour from school but figure I can do it easily (at this point you know for sure I'm a guy)
3:23 install back plate, after cleaning off old as5 re-apply new as5. Put on the anti-vibration stickies (they are very tiny for big hands geez).
3:28 Trying to figure out how the bloody wire brackets will hold the fan in place!!!
3:58 race to get daughter from school
4:25 I'm back. Still can't figure out the wires.
4:45 Finally realize that the fan I am using has solid corners and prevents the wires from going into the correct spot (between the edges of the fan frame). Nowhere is this mentioned in the 1 page documentation!
4:48 Time for power tools!! Get out a jigsaw and proceed to cut out the corners of the silverstone fan. Manage not to cut the wires or myself. Fan looks like crap now but no window in the case so who cares? (other than me!)
5:01 fan now mounts correctly. Proceed to attach the heatsink. Then realize that the wires on the nb side are going to hit my thermaltake spirit II.
5:22 (10 minutes of swearing in there). Remove everything again and bend wire for thermalright so it won't hit anything.
5:28 begin to reassemble. So far so good. Put the motherboard back on its tray. Slide everything in. Re-wire everything.
5:56 Install the backplate which has the fan control (This fan is a mini-jet engine at 2900 rpm/110 CFM, needs to be turned down so the neighbours don't complain. Kinda sounds like a shopvac actually...)
6:06 Fire it up. Everything works! (Didn't forget anything for once). While sitting with a dumb grin on my face looking into the open side of my case I put my hand in to feel the airflow of the silverstone and realized i mounted it backwards! I even marked the airflow side but forgot the mark.
6:16 (more swearing, I also am likely going to hell now. at least its a dry heat...). Take the fan off (Very hard with clearance with the nb cooler) and reverse it.
6:22 Ok fire it up again and its working. Check the fan controller knob, works perfectly.
6:24. I start looking at the thermalright and realize the bloody thing is really tall... Will the door with the 4 120mm fans run into it? (this is usually the cliffhanger part but im lazy here). Sure enough the door bangs right into the heatsink... ARGH!
6:26 (too angry to swear now, wishing I was a postal worker). Take out one of the fans and its mount (fortunately coolermaster made them removable).
6:30 It fits!! (with literally 2mm to spare).
Put it all together and it works perfectly.
Tests to follow