Overclock.net › Forums › Cooling › Air Cooling › Case & Fan Fit
New Posts  All Forums:Forum Nav:

Case & Fan Fit - Page 2

post #11 of 15
I have that combo - it fits just fine if you remove the little air tube thing from the inside of the case. My load temps haven't gotten above 42 with this setup with a mild overclock on my 6420 (2.8ghz).
     
CPUMotherboardGraphicsRAM
Q9450 @ 3.0 Gigabyte GA-P45-UD3P Evga 9800GTX+ 800/1943/1200 2x2GB OCZ 1066 LV 
Hard DriveOptical DriveOSMonitor
Vertex 2 40gb + 750gb Seagate 7200.10 Lite-On 24x DVD+-RW Windows 7 x64 LG 22" 1680x1050 
PowerCase
Corsair HX520w modular Coolermaster CM-690 
CPUMotherboardRAMHard Drive
Sempron LE-1250 Gigabyte GA-MA78GPM-DS2H 2GB (2x1GB) Corsair Ballistix 1066 2x750GB Western Digital RE2 Green power 
OSPowerCase
Windows Home Server w/ PP3 Ultra 400w modular Antec 300 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Q9450 @ 3.0 Gigabyte GA-P45-UD3P Evga 9800GTX+ 800/1943/1200 2x2GB OCZ 1066 LV 
Hard DriveOptical DriveOSMonitor
Vertex 2 40gb + 750gb Seagate 7200.10 Lite-On 24x DVD+-RW Windows 7 x64 LG 22" 1680x1050 
PowerCase
Corsair HX520w modular Coolermaster CM-690 
CPUMotherboardRAMHard Drive
Sempron LE-1250 Gigabyte GA-MA78GPM-DS2H 2GB (2x1GB) Corsair Ballistix 1066 2x750GB Western Digital RE2 Green power 
OSPowerCase
Windows Home Server w/ PP3 Ultra 400w modular Antec 300 
  hide details  
Reply
post #12 of 15
Thread Starter 
Actually let me rephrase myself. The load temps aren't that low. haha that was just orthos when it was starting up. Heavy load temps are more like.. 53 Degrees at 75% fan speed =P At 100% it makes quite a bit of noise.


Mine's overclocked to 3.4 Ghz with 1.5 or so vcore I believe, hence the high load temps =(
post #13 of 15
Nice job on the OC as well on temps. Keep up the good work!
post #14 of 15
Definitely an impressive OC! I'm hoping to get over at 3.0ghz one of these days. I've been a little afraid to go crazy with my CPU but seeing your results with a similar system makes me want to give it a shot.
     
CPUMotherboardGraphicsRAM
Q9450 @ 3.0 Gigabyte GA-P45-UD3P Evga 9800GTX+ 800/1943/1200 2x2GB OCZ 1066 LV 
Hard DriveOptical DriveOSMonitor
Vertex 2 40gb + 750gb Seagate 7200.10 Lite-On 24x DVD+-RW Windows 7 x64 LG 22" 1680x1050 
PowerCase
Corsair HX520w modular Coolermaster CM-690 
CPUMotherboardRAMHard Drive
Sempron LE-1250 Gigabyte GA-MA78GPM-DS2H 2GB (2x1GB) Corsair Ballistix 1066 2x750GB Western Digital RE2 Green power 
OSPowerCase
Windows Home Server w/ PP3 Ultra 400w modular Antec 300 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Q9450 @ 3.0 Gigabyte GA-P45-UD3P Evga 9800GTX+ 800/1943/1200 2x2GB OCZ 1066 LV 
Hard DriveOptical DriveOSMonitor
Vertex 2 40gb + 750gb Seagate 7200.10 Lite-On 24x DVD+-RW Windows 7 x64 LG 22" 1680x1050 
PowerCase
Corsair HX520w modular Coolermaster CM-690 
CPUMotherboardRAMHard Drive
Sempron LE-1250 Gigabyte GA-MA78GPM-DS2H 2GB (2x1GB) Corsair Ballistix 1066 2x750GB Western Digital RE2 Green power 
OSPowerCase
Windows Home Server w/ PP3 Ultra 400w modular Antec 300 
  hide details  
Reply
post #15 of 15
Thread Starter 
Be warned that raising vcore increasses load temps dramatically :S My zalman is just holding it down at 57 degrees celcius full orthos CPU stress test. Then again the thermal compound may not have set yet, as Ive only installed it about 9 hours ago =P
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › Case & Fan Fit