Originally Posted by Burn
I'm looking for anything past 3.5Ghz
I'm on uber water cooling so that shouldn't be a problem.
Trying 367*9 (3300) right now, on a 4:5 divider to get my RAM to 458 @ 5-5-5-15 timings.
All the other settings haven't been moved from stock (ICH, MCH, ICHIO, etc.).
Ok you shouldn't have to touch ICH or ICHIO... Since you have uber water cooling, I think it easier to achieve your desired OC by overvolting a little (initially anyway).
Set vCORE to 1.45, MCH 1.55, CPU VTT(vFSB) 1.45
That should allow you to run 9x 400FSB easy(also set memory to 1:1 just to limit your variables for now), from there if that works I'd keep MCH and CPU VTT the same and bump FSB in increments of 10-11(up to 450FSB), also bumping vCORE as needed.
Raised vCORE and Lowered other estimated voltages just a tad
-EDIT- #2 I know those voltages seem high, but anything at or beyond 400FSB requires some mad V. Here's a something I dug up over at XS
They run quite well. I am 100% stable all the way up to 508x7 and from 508-512 I can run orthos blend but it craps out after about 3 hours. Over 502 FSB I have to ramp up the voltage from 1.465Vcore to 1.49 to remain stable so I prefer to stay at 500.
My mem voltage is 2.2V and anything over 502 I have to ramp it up to 2.25V. At 508 and up I need 2.3V and Mch of 1.70 so again, I prefer to stay at 500 which seems to be my sweetspot
The QuadGT is every bit as fast as my DFI LT X48-T2R, well for now anyway... I'm going to download MemSet and see just how much tweaking will lower my PI times.