Overclock.net › Forums › AMD › AMD CPUs › Help Overclocking my AMD 3800 X2 S939
New Posts  All Forums:Forum Nav:

Help Overclocking my AMD 3800 X2 S939 - Page 6

post #51 of 73
Thread Starter 
http://valid.x86-secret.com/show_oc?id=210516

Just booted in at 2.4, no voltage changes yet, what should I run to test stability.. ie what settings in prime95? Are my mem timings correct? In bios I set Mem Lock @ 166
CAS Latency - 3
Min RAS active time (Tras) - 8T
Row precharge time (Trp) - 3T
RAS to CAS delay (Trcd) - 3T
1T/2T mem timings - Default

In bios my voltage options are as follows..

Chipset Vcore select - Default (1.45) options to set at 1.6, 1.7, 1.8

CPU voltage regulator - Default (1.4V) options to set at 1.425, 1.450, 1.475, 1.500 etc..

What should I do?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8500 / 4.0GHz Gigabyte EP45-UD3P ASUS 5770 4GB Kingston 9200 C5 840MHz 
Hard DriveOptical DriveOSMonitor
2 x 320 WD / RAID 0 Lite-On Dual layer DVD-RW Windows 7 BenQ 19inch Widescreen 
PowerCaseMouse
550watt ColoursIT Antec 300 Logitech G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8500 / 4.0GHz Gigabyte EP45-UD3P ASUS 5770 4GB Kingston 9200 C5 840MHz 
Hard DriveOptical DriveOSMonitor
2 x 320 WD / RAID 0 Lite-On Dual layer DVD-RW Windows 7 BenQ 19inch Widescreen 
PowerCaseMouse
550watt ColoursIT Antec 300 Logitech G5 
  hide details  
Reply
post #52 of 73
from Orthos use Blend test
Your memory timmings in that Validation link are not correct however hwat you listed
Quote:
CAS Latency - 3
Min RAS active time (Tras) - 8T
Row precharge time (Trp) - 3T
RAS to CAS delay (Trcd) - 3T
1T/2T mem timings - Default
is correct
Try to set CPU voltage regulator to 1.45 and test for stability
My System 2
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @4.2GHZ GA-EP31-DS3L HD4850 512MB + Zalman 2X2GB Kingston @PC8000 
Hard DriveOSMonitorPower
250GB WD XP SP3 + Vista home perimum 19' BenQ Widescreen HEC 580W 
Case
Gigabyte setto 1000 
  hide details  
Reply
My System 2
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @4.2GHZ GA-EP31-DS3L HD4850 512MB + Zalman 2X2GB Kingston @PC8000 
Hard DriveOSMonitorPower
250GB WD XP SP3 + Vista home perimum 19' BenQ Widescreen HEC 580W 
Case
Gigabyte setto 1000 
  hide details  
Reply
post #53 of 73
Thread Starter 
Am i raising V core or CPU voltage reg?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8500 / 4.0GHz Gigabyte EP45-UD3P ASUS 5770 4GB Kingston 9200 C5 840MHz 
Hard DriveOptical DriveOSMonitor
2 x 320 WD / RAID 0 Lite-On Dual layer DVD-RW Windows 7 BenQ 19inch Widescreen 
PowerCaseMouse
550watt ColoursIT Antec 300 Logitech G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8500 / 4.0GHz Gigabyte EP45-UD3P ASUS 5770 4GB Kingston 9200 C5 840MHz 
Hard DriveOptical DriveOSMonitor
2 x 320 WD / RAID 0 Lite-On Dual layer DVD-RW Windows 7 BenQ 19inch Widescreen 
PowerCaseMouse
550watt ColoursIT Antec 300 Logitech G5 
  hide details  
Reply
post #54 of 73
Quote:
Originally Posted by onlyone View Post
Am i raising V core or CPU voltage reg?
Both are the same
My System 2
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @4.2GHZ GA-EP31-DS3L HD4850 512MB + Zalman 2X2GB Kingston @PC8000 
Hard DriveOSMonitorPower
250GB WD XP SP3 + Vista home perimum 19' BenQ Widescreen HEC 580W 
Case
Gigabyte setto 1000 
  hide details  
Reply
My System 2
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @4.2GHZ GA-EP31-DS3L HD4850 512MB + Zalman 2X2GB Kingston @PC8000 
Hard DriveOSMonitorPower
250GB WD XP SP3 + Vista home perimum 19' BenQ Widescreen HEC 580W 
Case
Gigabyte setto 1000 
  hide details  
Reply
post #55 of 73
I downloaded your Mobo manual to make my life easier
So


From X-BIOS II <Over Clocking>Menu
Raise your CPU Voltage regulator to 1.45V


From BIOS Features Menu
PCIE Clock 100MHZ
PCI Clock Lock enable
CPU Frequency 240MHZ

From Advanced Chipset Features
HT Frequency 3x
>DRAM Configuration
timing mode manual
MemClock index 166MHZ
Quote:
CAS Latency - 3
Min RAS active time (Tras) - 8T
Row precharge time (Trp) - 3T
RAS to CAS delay (Trcd) - 3T
1T/2T mem timings - Default
My System 2
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @4.2GHZ GA-EP31-DS3L HD4850 512MB + Zalman 2X2GB Kingston @PC8000 
Hard DriveOSMonitorPower
250GB WD XP SP3 + Vista home perimum 19' BenQ Widescreen HEC 580W 
Case
Gigabyte setto 1000 
  hide details  
Reply
My System 2
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @4.2GHZ GA-EP31-DS3L HD4850 512MB + Zalman 2X2GB Kingston @PC8000 
Hard DriveOSMonitorPower
250GB WD XP SP3 + Vista home perimum 19' BenQ Widescreen HEC 580W 
Case
Gigabyte setto 1000 
  hide details  
Reply
post #56 of 73
Thread Starter 
wicked thanks buddy
Ill run that then post a validation at 2.5 if i get there ,lol
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8500 / 4.0GHz Gigabyte EP45-UD3P ASUS 5770 4GB Kingston 9200 C5 840MHz 
Hard DriveOptical DriveOSMonitor
2 x 320 WD / RAID 0 Lite-On Dual layer DVD-RW Windows 7 BenQ 19inch Widescreen 
PowerCaseMouse
550watt ColoursIT Antec 300 Logitech G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8500 / 4.0GHz Gigabyte EP45-UD3P ASUS 5770 4GB Kingston 9200 C5 840MHz 
Hard DriveOptical DriveOSMonitor
2 x 320 WD / RAID 0 Lite-On Dual layer DVD-RW Windows 7 BenQ 19inch Widescreen 
PowerCaseMouse
550watt ColoursIT Antec 300 Logitech G5 
  hide details  
Reply
post #57 of 73
Thread Starter 
ok ive just run orthos for 10mins all good, havnt upped voltage yet, must have been mem causing crash, i set it to what you said but still comes up the same in CPU-Z..?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8500 / 4.0GHz Gigabyte EP45-UD3P ASUS 5770 4GB Kingston 9200 C5 840MHz 
Hard DriveOptical DriveOSMonitor
2 x 320 WD / RAID 0 Lite-On Dual layer DVD-RW Windows 7 BenQ 19inch Widescreen 
PowerCaseMouse
550watt ColoursIT Antec 300 Logitech G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8500 / 4.0GHz Gigabyte EP45-UD3P ASUS 5770 4GB Kingston 9200 C5 840MHz 
Hard DriveOptical DriveOSMonitor
2 x 320 WD / RAID 0 Lite-On Dual layer DVD-RW Windows 7 BenQ 19inch Widescreen 
PowerCaseMouse
550watt ColoursIT Antec 300 Logitech G5 
  hide details  
Reply
post #58 of 73
Thread Starter 
by the way my CPU was 52C full load, is that hot?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8500 / 4.0GHz Gigabyte EP45-UD3P ASUS 5770 4GB Kingston 9200 C5 840MHz 
Hard DriveOptical DriveOSMonitor
2 x 320 WD / RAID 0 Lite-On Dual layer DVD-RW Windows 7 BenQ 19inch Widescreen 
PowerCaseMouse
550watt ColoursIT Antec 300 Logitech G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8500 / 4.0GHz Gigabyte EP45-UD3P ASUS 5770 4GB Kingston 9200 C5 840MHz 
Hard DriveOptical DriveOSMonitor
2 x 320 WD / RAID 0 Lite-On Dual layer DVD-RW Windows 7 BenQ 19inch Widescreen 
PowerCaseMouse
550watt ColoursIT Antec 300 Logitech G5 
  hide details  
Reply
post #59 of 73
Thread Starter 
http://valid.x86-secret.com/show_oc?id=210526
ok clocked at 2.5, running orthos now, ill let you know stability
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8500 / 4.0GHz Gigabyte EP45-UD3P ASUS 5770 4GB Kingston 9200 C5 840MHz 
Hard DriveOptical DriveOSMonitor
2 x 320 WD / RAID 0 Lite-On Dual layer DVD-RW Windows 7 BenQ 19inch Widescreen 
PowerCaseMouse
550watt ColoursIT Antec 300 Logitech G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8500 / 4.0GHz Gigabyte EP45-UD3P ASUS 5770 4GB Kingston 9200 C5 840MHz 
Hard DriveOptical DriveOSMonitor
2 x 320 WD / RAID 0 Lite-On Dual layer DVD-RW Windows 7 BenQ 19inch Widescreen 
PowerCaseMouse
550watt ColoursIT Antec 300 Logitech G5 
  hide details  
Reply
post #60 of 73
52 Load with Orthos is fine ,, just let me know how it goes , what tool you are using for temp monitoring ?
My System 2
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @4.2GHZ GA-EP31-DS3L HD4850 512MB + Zalman 2X2GB Kingston @PC8000 
Hard DriveOSMonitorPower
250GB WD XP SP3 + Vista home perimum 19' BenQ Widescreen HEC 580W 
Case
Gigabyte setto 1000 
  hide details  
Reply
My System 2
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @4.2GHZ GA-EP31-DS3L HD4850 512MB + Zalman 2X2GB Kingston @PC8000 
Hard DriveOSMonitorPower
250GB WD XP SP3 + Vista home perimum 19' BenQ Widescreen HEC 580W 
Case
Gigabyte setto 1000 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Help Overclocking my AMD 3800 X2 S939