Originally Posted by daljeet2
you need a Q-Connector i think for it to work
you dont need a q-connector, all that does is line up the connectors to where they are supposed to go - makes it easier for noobs
- look through your manual and make sure you find out which pins to connect the internal speaker(if you have one, some mobos have them on the board-which it sounds like yours doesnt- and some you have to actually plug in to the pins(the group of pins where the led's and power switch go)). make sure you are able to do this though as that little speaker can tell you so much. then do like others have said and take everything out except cpu (connect psu of course). see if it beeps indicating missing RAM. if it doesnt try clearing your CMOS for about an hour or make sure your speaker is hooked up right(maybe reverse the connectors/polarity).
also as has been said it is a good chance that your mobo is defaulting to a too low RAM voltage for those modules.