I did a quick thread search but was not able to find any useful info, so here goes. I just finished my X2 rig (in my sig) and started testing. I opened Coretemp and...and...9c core0, 11c core1, no Tjunction. Alright, this has happened before. Usually MBM screwing around assigning sensors to the wrong locations. I go through, erase anything MBM related (including Reg entries), and reboot. Same thing, temps impossibly low. :***: In BIOS, a little better, 20c CPU, 44c chipset, 33c system. Looks like the chipset sensor is OK. I have installed, uninstalled, and reconfigured every monitoring program I could think of. Even the DFI software was inaccurate. My only thought is that there are still some Gigabyte drivers left over from my old board that are screwing things up. I've done a decent search, but have not found any though. If anyone has ideas, that would be a big help. Also, if anyone knows where to view all the drivers installed on the system (to see if I missed any) that would also be a big help.
post #1 of 26
6/26/07 at 5:51pm