Overclock.net › Forums › Cooling › Air Cooling › Freezer 7 Pro with 3ghz E6600?
New Posts  All Forums:Forum Nav:

Freezer 7 Pro with 3ghz E6600?

post #1 of 10
Thread Starter 
a local store has the F7Pro for $30. im wondering what kind of temps id get out of my CPU with it. i get 52C running orthos with the stock intel cooler, 31C idle. my ambient temp is around 25C. CPU is an E6600 clocked to 3ghz. i might want to clock it a little higher as well- maybe 3.2ghz.

its kinda hard to justify spending TWICE as much in a Tunic or Ultra 120 extreme.
post #2 of 10
I would definately get a Tuniq Tower 120, Thermalright Ultra 120 eXtreme, or Enzotech Ultra-X over an Arctic Freezer. Your temps will be at least 5C lower, I would not be suprised if you run 9 or 10C cooler at load compared to a Freezer 7. Check out Knitelite and Audi's thread comparing an Ultra 120 to an Ultra-X; at stock they idle at 19-20C.

NiNJa
The Monolith: III
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q6600 Asus P5K Deluxe/WiFi-AP eVGA e-GeForce 8800GTX 2x1GB of G. Skill DDR2-800 
Hard DriveOptical DriveOSMonitor
300GB / 60GB / 4GB 16x LG DVD Burner Windows: XP ViewSonic 19" VP191b 
KeyboardPowerCaseMouse
Saitek PK-02 SeaSonic M12 SS-700MH Antec P180B Mid-Tower Logitech G5 
Mouse Pad
-- 
  hide details  
Reply
The Monolith: III
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q6600 Asus P5K Deluxe/WiFi-AP eVGA e-GeForce 8800GTX 2x1GB of G. Skill DDR2-800 
Hard DriveOptical DriveOSMonitor
300GB / 60GB / 4GB 16x LG DVD Burner Windows: XP ViewSonic 19" VP191b 
KeyboardPowerCaseMouse
Saitek PK-02 SeaSonic M12 SS-700MH Antec P180B Mid-Tower Logitech G5 
Mouse Pad
-- 
  hide details  
Reply
post #3 of 10
From what I've read, you will have clearance issues with the P5N-E SLI northbridge heatsink and the Freezer 7 Pro.
uoıʇnloʌ3
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel C2D E6600 - SL9S8 MSI P6N SLI PLATINUM - BIOS v1.4 8800 GTS 640MB G.Skill DDR2-800 2x1GB (HZ) 
Hard DriveOptical DriveOSKeyboard
Seagate Barracuda 300GB SATA (7200.10) Lite-On 16X DVD SATA (SH-16A7S-06) Vista Home Premium (32 bit) Saitek Eclipse II 
PowerCaseMouse
BFG 650W Antec 900 Logitech G7 
  hide details  
Reply
uoıʇnloʌ3
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel C2D E6600 - SL9S8 MSI P6N SLI PLATINUM - BIOS v1.4 8800 GTS 640MB G.Skill DDR2-800 2x1GB (HZ) 
Hard DriveOptical DriveOSKeyboard
Seagate Barracuda 300GB SATA (7200.10) Lite-On 16X DVD SATA (SH-16A7S-06) Vista Home Premium (32 bit) Saitek Eclipse II 
PowerCaseMouse
BFG 650W Antec 900 Logitech G7 
  hide details  
Reply
post #4 of 10
The Freezer 7 Pro will give you best bang for the buck and will get you near your max clocks but other coolers will allow you go to maybe 100-300mhz further. Alot depends on the chip though as well. Some have a wall where you don't really have to worry about temps.
post #5 of 10
Thread Starter 
Quote:
Originally Posted by Ellipsis View Post
From what I've read, you will have clearance issues with the P5N-E SLI northbridge heatsink and the Freezer 7 Pro.
ive got a Thermaltake Extreme Spirit II on my NB, 650i runs HOT!
post #6 of 10
Hey RX7... #1 Welcome to OCN
#2, head over to Intel Motherboards, go to the stickied thread "P5N-E"
#3 I have the P5N-E + F7Pro!

With that TT Extreme Spirit you should be fine
    
CPUMotherboardGraphicsRAM
D820 2.8 300x14 = 4.2Ghz (50%OC) P5QC EVGA 8800GT 4GB (2x2) Ballistix Tracers 
Hard DriveOptical DriveOSMonitor
320 West.Dig. SATA Samsung CDRW-DVDRom/HP DVD Writer(LightScribe) XP-SP3/Ubuntu-Ibex/Win7 19" Acer WS & 42" Plasma 
KeyboardPowerCaseMouse
Micro Innovations Multimedia GS 600 Antec 900 (See Gallery!) Microsoft USB Optical 
Mouse Pad
Keyboard Tray FTW! 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
D820 2.8 300x14 = 4.2Ghz (50%OC) P5QC EVGA 8800GT 4GB (2x2) Ballistix Tracers 
Hard DriveOptical DriveOSMonitor
320 West.Dig. SATA Samsung CDRW-DVDRom/HP DVD Writer(LightScribe) XP-SP3/Ubuntu-Ibex/Win7 19" Acer WS & 42" Plasma 
KeyboardPowerCaseMouse
Micro Innovations Multimedia GS 600 Antec 900 (See Gallery!) Microsoft USB Optical 
Mouse Pad
Keyboard Tray FTW! 
  hide details  
Reply
post #7 of 10
well i would have to say no, while it is a good hsf set-up it is not the optimal and does just good enough to not replace it but not good enough to like it.

I was running about 55c@ load with stock hsf running 266fsb x9, 2.4Ghz, and with freeazer7 pro 58c@ load running 340fsb x9, 3.0Ghz.
btw I am running vcore of 1.424v and 1.408v under load.

IMO I would recommend spending the extra cash on a TT120 or Ultra 120 extreme.
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
post #8 of 10
Oh and as far as temps... check my gallery.
Get your two intake fans up top, and you are all set. (God you even have the 900, did you steal half my rig? lol)

I am using 1.4v vcore with +100mv on (essentially 1.5v vcore)
On a dual core Pentium D 820, 90nm tech. Essentially two prescHotts on a single die, thus the smithfield was born. Prescotts are known as prescHotts for obvious reasons

What I am getting at is this...
I have a botched Ceramique job... as in heatsink removed/replaced ~4 times without cleaning or reapplying.
I have the stock F7Pro fan.
I have my heatcore (D820) @ ~1.5v and 3.7Ghz.
And I still achieve 34C idle temps @ 70F ambient. With a load of 47C Max.
At 78F ambient I am pulling ~53 temps @ 100% CPU utilization by folding SMP.

The F7Pro is a very good bargain when bought cheap. I bought mine for ~$30 as well.
I plan on lapping it, and installing an FM121 on it (zip ties FTW!)
I bet I'll get down to ~47 while folding
    
CPUMotherboardGraphicsRAM
D820 2.8 300x14 = 4.2Ghz (50%OC) P5QC EVGA 8800GT 4GB (2x2) Ballistix Tracers 
Hard DriveOptical DriveOSMonitor
320 West.Dig. SATA Samsung CDRW-DVDRom/HP DVD Writer(LightScribe) XP-SP3/Ubuntu-Ibex/Win7 19" Acer WS & 42" Plasma 
KeyboardPowerCaseMouse
Micro Innovations Multimedia GS 600 Antec 900 (See Gallery!) Microsoft USB Optical 
Mouse Pad
Keyboard Tray FTW! 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
D820 2.8 300x14 = 4.2Ghz (50%OC) P5QC EVGA 8800GT 4GB (2x2) Ballistix Tracers 
Hard DriveOptical DriveOSMonitor
320 West.Dig. SATA Samsung CDRW-DVDRom/HP DVD Writer(LightScribe) XP-SP3/Ubuntu-Ibex/Win7 19" Acer WS & 42" Plasma 
KeyboardPowerCaseMouse
Micro Innovations Multimedia GS 600 Antec 900 (See Gallery!) Microsoft USB Optical 
Mouse Pad
Keyboard Tray FTW! 
  hide details  
Reply
post #9 of 10
Thread Starter 
dpawl- im only running 1.30vcore on my c2d at 3ghz. i ran orthos for 6 hours at 1.28vcore- i dont know why i have it back at 1.3..

if i could keep the temps in the 40s (mid 40s?) at full load with the clock speed at 3.2, id be happy. im getting 52C @ 3ghz with an unlapped intel cooler, so i think its possible.

what ever HSF i get i will definatly lap, ive got alot of experience polishing steel and aluminum- the copper base should be a breeze.

ill probably go and pick one up in a week or so.
post #10 of 10
The Ultra Extreme is worth every penny

Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › Freezer 7 Pro with 3ghz E6600?