Originally Posted by blade007
inlet fans? dont know wat those are, but my case will be the stacker 832
You have fans that suck air into your case, and fans that blow air out. Make sure those are not right next to each other, but like at different sides of your case, if at all possible. If you have six 120mm case fans, probably use four to exhaust air out, and two to suck air in (your case will "leak" air in to accommodate the difference). And you seriously want air flow
in your case... if you have a side window to look inside, test with a couple matches by lighting them and blowing them out and then letting the smoke into your case... watch where it goes and see if your case has any areas of stagnant airflow. If you have any stagnant airflow consider "ducting" air around your case, like this (just to get an idea):
If you can direct, and move air around your case better, your components will smile at you
Also, if you don't have a case window, you can just leave the side off and cover with saran wrap instead... just for testing.