O.K. I got an e-mail from you requesting the settings in my bios to O.C. your system. Here it is in great detail:
Go to ADVANCED CHIPSET FEATURES:
disable both options(C1E and Cool & quiet)
Go back to main bios screen.
Go to OVERCLOCK NAVIGATOR ENGINE:
Cange first option to manual.
Change CPU vid to 1.4v
Change memory voltage to 2.0v
Change chipset voltage to 1.65v
Change Hyper Transport voltage to 1.3v
Change CPU frequency to 305
Leave NPT FID control on AUTO
Change K8<->NB HT speed to x3
Change memory timing mode to MAXMEMCLK
Change mem clock value to 400
Change PCIE spread spectrum to disable
PCIE clock stays at 100
Now, under the same screen go to DRAM CONFIG:
Change Trfc0, Trfc1, Trfc2, and Trfc3 to 105ns
Now under this same screen you will see MEMORY TIMING. Go there now.
Change from top to bottom 5-5-5-15-2
Only change the top 5 options.
Save everything and test. Your chip may need more\\less voltage. My other 3600 won't do 2.9 without almost 1.5v so, luck of the draw. What is the stepping on the chip. I can tell you about what that chip can do. Good luck!