Overclock.net › Forums › Cooling › Water Cooling › The Quest for the Perfect Waterblock
New Posts  All Forums:Forum Nav:

The Quest for the Perfect Waterblock - Page 6

post #51 of 95
I am running this test block now, it is an inverted V8 with the dividing walls cut into the upper chamber and a seperate baseplate with diamond pins cut into it. It
is made of parts from the scrap bucket just to test the diamond pin design coupled with my V8 design. I will soon be passing this block on to my Tester (whom you all know) for further evaluation.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400@4.0 DFI Blood Iron EVGA 9600GT 8 Gigs Gskill pc6400 
Hard DriveOSMonitorKeyboard
Maxtor Diamond Max Windows7 Pro Acer AL2016W yes 
PowerCaseMouseMouse Pad
OCZ 500w SXS Ultra Aluminus yes yes 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400@4.0 DFI Blood Iron EVGA 9600GT 8 Gigs Gskill pc6400 
Hard DriveOSMonitorKeyboard
Maxtor Diamond Max Windows7 Pro Acer AL2016W yes 
PowerCaseMouseMouse Pad
OCZ 500w SXS Ultra Aluminus yes yes 
  hide details  
Reply
post #52 of 95
wow looks great!!!

cant wait to see what the results are on that one!!

btw how did you make the pins?
any closer picture of just the pin plate there?
Blue
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 @ 3.6 , 1.45v ASUS P5B-Deluxe WiFi EVGA 8800GTS 640Mb 4 x 1Gb Patriot PC2-8500 DDR2-1066@5 5 5 9 
Hard DriveOSMonitorKeyboard
RaptorX 150Gb , 3 x 320Gig Seagate 7200.10 Windows xp pro SyncMaster 915n Microsoft RECLUSA 
PowerCaseMouseMouse Pad
Corsair 620HX Thermaltake Armor 25cm Side fan Mx518 FUNC F10.s 
  hide details  
Reply
Blue
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 @ 3.6 , 1.45v ASUS P5B-Deluxe WiFi EVGA 8800GTS 640Mb 4 x 1Gb Patriot PC2-8500 DDR2-1066@5 5 5 9 
Hard DriveOSMonitorKeyboard
RaptorX 150Gb , 3 x 320Gig Seagate 7200.10 Windows xp pro SyncMaster 915n Microsoft RECLUSA 
PowerCaseMouseMouse Pad
Corsair 620HX Thermaltake Armor 25cm Side fan Mx518 FUNC F10.s 
  hide details  
Reply
post #53 of 95
Hey frosty have you ever done a block with dual in and dual out but seperated by a thin sheet of copper in the center. Basically so you coul duse two loops feeding the dame water bloack.
xeon
(13 items)
 
  
CPUMotherboardGraphicsRAM
W3520 x58 ud5 9800gtx+ tridents 
Hard DriveOSMonitorPower
wd black x2 W7 64 acer 23 ocz 850hx 
Case
haf932 
  hide details  
Reply
xeon
(13 items)
 
  
CPUMotherboardGraphicsRAM
W3520 x58 ud5 9800gtx+ tridents 
Hard DriveOSMonitorPower
wd black x2 W7 64 acer 23 ocz 850hx 
Case
haf932 
  hide details  
Reply
post #54 of 95
With a slitter saw, don't expect anything mind blowing. Like someone said you will hit a wall with straight water. From what I can tell running on my 3.2E (very Hot chip) My old V6 can hold its own with it within a 5 degree delta it may have given me a 1-2C improvement. What I am hoping for is good performance on the Duals and Quads.

My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400@4.0 DFI Blood Iron EVGA 9600GT 8 Gigs Gskill pc6400 
Hard DriveOSMonitorKeyboard
Maxtor Diamond Max Windows7 Pro Acer AL2016W yes 
PowerCaseMouseMouse Pad
OCZ 500w SXS Ultra Aluminus yes yes 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400@4.0 DFI Blood Iron EVGA 9600GT 8 Gigs Gskill pc6400 
Hard DriveOSMonitorKeyboard
Maxtor Diamond Max Windows7 Pro Acer AL2016W yes 
PowerCaseMouseMouse Pad
OCZ 500w SXS Ultra Aluminus yes yes 
  hide details  
Reply
post #55 of 95
I love fancy milling setups like that. Even though that isn't all that fancy.

Is doing the block inverted like that a lot more work? It seems like it would be since you are machining on both halves of the block. The tops to the others are just plates, no real work done on them right (besides drilling and tapping)?
post #56 of 95
Quote:
Originally Posted by fstfrddy View Post
With a slitter saw, don't expect anything mind blowing. Like someone said you will hit a wall with straight water. From what I can tell running on my 3.2E (very Hot chip) My old V6 can hold its own with it within a 5 degree delta it may have given me a 1-2C improvement. What I am hoping for is good performance on the Duals and Quads.

wow nice pic!!!

yup my Prescott 3.0 was really hot as well.

But with the new quads soming out and the price drops, the
Q6600 will be the same price as an E6600!!!
Thats just nuts....so if any new blocks come out, they should be for the quads that look very affordable at this point.

Nice pins !!

cant wait and see how this thing performs!

keep us updated Fred,
Hey is there any way to keep a sticky or log in the WC forum where your progress towards stinger blocks are going?
and what new blocks you have out?
Is that allowed?

no ads for sale and such!

just like updated progress
Blue
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 @ 3.6 , 1.45v ASUS P5B-Deluxe WiFi EVGA 8800GTS 640Mb 4 x 1Gb Patriot PC2-8500 DDR2-1066@5 5 5 9 
Hard DriveOSMonitorKeyboard
RaptorX 150Gb , 3 x 320Gig Seagate 7200.10 Windows xp pro SyncMaster 915n Microsoft RECLUSA 
PowerCaseMouseMouse Pad
Corsair 620HX Thermaltake Armor 25cm Side fan Mx518 FUNC F10.s 
  hide details  
Reply
Blue
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 @ 3.6 , 1.45v ASUS P5B-Deluxe WiFi EVGA 8800GTS 640Mb 4 x 1Gb Patriot PC2-8500 DDR2-1066@5 5 5 9 
Hard DriveOSMonitorKeyboard
RaptorX 150Gb , 3 x 320Gig Seagate 7200.10 Windows xp pro SyncMaster 915n Microsoft RECLUSA 
PowerCaseMouseMouse Pad
Corsair 620HX Thermaltake Armor 25cm Side fan Mx518 FUNC F10.s 
  hide details  
Reply
post #57 of 95
You're right not all that fancy, I make most of my own tools like the saw arbor and the vise but it gets the job done. This was a real quick job, when i started I never intended for it to be put together I was just practicing and one thing led to another. The work kind of evened out the chamber cut fast cutting the pins is slow.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400@4.0 DFI Blood Iron EVGA 9600GT 8 Gigs Gskill pc6400 
Hard DriveOSMonitorKeyboard
Maxtor Diamond Max Windows7 Pro Acer AL2016W yes 
PowerCaseMouseMouse Pad
OCZ 500w SXS Ultra Aluminus yes yes 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400@4.0 DFI Blood Iron EVGA 9600GT 8 Gigs Gskill pc6400 
Hard DriveOSMonitorKeyboard
Maxtor Diamond Max Windows7 Pro Acer AL2016W yes 
PowerCaseMouseMouse Pad
OCZ 500w SXS Ultra Aluminus yes yes 
  hide details  
Reply
post #58 of 95
It looks like about 30 cuts per side. Do you move the table up/down manually after each cut?
post #59 of 95
Quote:
Originally Posted by fstfrddy View Post
You're right not all that fancy, I make most of my own tools like the saw arbor and the vise but it gets the job done. This was a real quick job, when i started I never intended for it to be put together I was just practicing and one thing led to another. The work kind of evened out the chamber cut fast cutting the pins is slow.
maybe you can get some, pre-molded sheets of copper with pins, or forged ones, and then just cut them to the sizes you need.
Blue
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 @ 3.6 , 1.45v ASUS P5B-Deluxe WiFi EVGA 8800GTS 640Mb 4 x 1Gb Patriot PC2-8500 DDR2-1066@5 5 5 9 
Hard DriveOSMonitorKeyboard
RaptorX 150Gb , 3 x 320Gig Seagate 7200.10 Windows xp pro SyncMaster 915n Microsoft RECLUSA 
PowerCaseMouseMouse Pad
Corsair 620HX Thermaltake Armor 25cm Side fan Mx518 FUNC F10.s 
  hide details  
Reply
Blue
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 @ 3.6 , 1.45v ASUS P5B-Deluxe WiFi EVGA 8800GTS 640Mb 4 x 1Gb Patriot PC2-8500 DDR2-1066@5 5 5 9 
Hard DriveOSMonitorKeyboard
RaptorX 150Gb , 3 x 320Gig Seagate 7200.10 Windows xp pro SyncMaster 915n Microsoft RECLUSA 
PowerCaseMouseMouse Pad
Corsair 620HX Thermaltake Armor 25cm Side fan Mx518 FUNC F10.s 
  hide details  
Reply
post #60 of 95
The head moves not the table .090" each time .045 saw. Yes manually, it is not CNC
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400@4.0 DFI Blood Iron EVGA 9600GT 8 Gigs Gskill pc6400 
Hard DriveOSMonitorKeyboard
Maxtor Diamond Max Windows7 Pro Acer AL2016W yes 
PowerCaseMouseMouse Pad
OCZ 500w SXS Ultra Aluminus yes yes 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400@4.0 DFI Blood Iron EVGA 9600GT 8 Gigs Gskill pc6400 
Hard DriveOSMonitorKeyboard
Maxtor Diamond Max Windows7 Pro Acer AL2016W yes 
PowerCaseMouseMouse Pad
OCZ 500w SXS Ultra Aluminus yes yes 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › The Quest for the Perfect Waterblock