Overclock.net › Forums › Intel › Intel CPUs › Any tips on a PD940 (New Build)
New Posts  All Forums:Forum Nav:

Any tips on a PD940 (New Build) - Page 4

post #31 of 35
Thread Starter 
So I wanted more stable, I backed it down to 3.9GHz for the moment, and set the Vcore for 1.3 in the bios, ends up being 1.23 at full load (I can only assume that is what you mean by Vdroop. Temps got up to 48ºC max, and it still idles around 31ºC. I ran orthos for almost 16 hours with no errors, so I'm going to call this one stable. Work for more later. I want the 4GHz to be rock solid stable, as in run Orthos forever I don't care, I think there is an issue between the difference between FSB and Mem Frequency right now, because if I push up to 4GHz the MoBo goes into the default warning mode. It was fine at that speed the other day but on next boot after sitting for a day it went straight to the Warning, please reset. I'm guessing I need to up the Vcore in order to get to 4GHz, especially with the Vdroop.
    
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4GHz (445x9) on 1.325V (bios) | ASUS Rampage Formula x48 | | BIOS 0410 | Visiontek 4870 790/1100 | 2x2GB G.Skill PI @1069MHz | 1.9V | 5-5-5-15 2T | 
Hard DriveOptical DriveOSMonitor
Seagate 2x320GB 7200.10 in RAID 0 + 250GB 7200.10 Lite-On DVD+-R/RW DL Vista Ultimate x64 42" Aquous @ 1440 x 900 (1920 x 1080 is too small) 
KeyboardPowerCaseMouse
Logitech MX5500 Silverstone DA750 THE Rocketfish Logitech MX Revolution 
Mouse Pad
Neat one from Body Worlds exhibit 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4GHz (445x9) on 1.325V (bios) | ASUS Rampage Formula x48 | | BIOS 0410 | Visiontek 4870 790/1100 | 2x2GB G.Skill PI @1069MHz | 1.9V | 5-5-5-15 2T | 
Hard DriveOptical DriveOSMonitor
Seagate 2x320GB 7200.10 in RAID 0 + 250GB 7200.10 Lite-On DVD+-R/RW DL Vista Ultimate x64 42" Aquous @ 1440 x 900 (1920 x 1080 is too small) 
KeyboardPowerCaseMouse
Logitech MX5500 Silverstone DA750 THE Rocketfish Logitech MX Revolution 
Mouse Pad
Neat one from Body Worlds exhibit 
  hide details  
Reply
post #32 of 35
Thread Starter 
I forgot to attach the proof!!!
    
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4GHz (445x9) on 1.325V (bios) | ASUS Rampage Formula x48 | | BIOS 0410 | Visiontek 4870 790/1100 | 2x2GB G.Skill PI @1069MHz | 1.9V | 5-5-5-15 2T | 
Hard DriveOptical DriveOSMonitor
Seagate 2x320GB 7200.10 in RAID 0 + 250GB 7200.10 Lite-On DVD+-R/RW DL Vista Ultimate x64 42" Aquous @ 1440 x 900 (1920 x 1080 is too small) 
KeyboardPowerCaseMouse
Logitech MX5500 Silverstone DA750 THE Rocketfish Logitech MX Revolution 
Mouse Pad
Neat one from Body Worlds exhibit 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4GHz (445x9) on 1.325V (bios) | ASUS Rampage Formula x48 | | BIOS 0410 | Visiontek 4870 790/1100 | 2x2GB G.Skill PI @1069MHz | 1.9V | 5-5-5-15 2T | 
Hard DriveOptical DriveOSMonitor
Seagate 2x320GB 7200.10 in RAID 0 + 250GB 7200.10 Lite-On DVD+-R/RW DL Vista Ultimate x64 42" Aquous @ 1440 x 900 (1920 x 1080 is too small) 
KeyboardPowerCaseMouse
Logitech MX5500 Silverstone DA750 THE Rocketfish Logitech MX Revolution 
Mouse Pad
Neat one from Body Worlds exhibit 
  hide details  
Reply
post #33 of 35
pretty nice i run my 945 at 4.51-4.59 4.59 needs a good bump up on vcore compared to 4.51 tho.
SABERWOLF
(18 items)
 
XEON-WOLF
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6800K MSI X99A GAMING PRO CARBON EVGA GTX 1080 FTW Hydro Copper G.SKILL TridentZ Series 
Hard DriveCoolingCoolingCooling
Samsung EVO 850 500 EK-SBAY Dual DDC 3.2 PWM Serial Alphacool NexXxoS ST30 Full Copper Radiator 360 Hardware Labs Black Ice SR2 Multiport Black Car... 
CoolingCoolingOSMonitor
EK-CoolStream RAD XTC 420 koolance 380i Windows 10 Pro ASUS VW246H Black 24" 2ms 
PowerCaseMouseAudio
SeaSonic M12D SS-850 850W  Thermaltake core x71 CM Storm Sentinel Advance II Corsair Void 
CPUMotherboardGraphicsRAM
X5675@4400 1.344 ASUS P6X58D-E XfX RX480 RS F3-12800CL7T-6GBPI 6-7-6-21 1T 
RAMHard DriveHard DriveHard Drive
F3-12800CL9S-4GBRL WDC WD1001FALS-00J7B1 ST31000340AS WDC WD7500AAKS-00RBA0 
Hard DriveOptical DriveCoolingOS
Hitachi HDS723020BLA642 ihas 624-A SilverStone Heligon HE01 windows 10 64 Pro 
MonitorPowerCase
Vizio 42inch lcd tv CORSAIR CMPSU-950TX Modded Rocketfish 
  hide details  
Reply
SABERWOLF
(18 items)
 
XEON-WOLF
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6800K MSI X99A GAMING PRO CARBON EVGA GTX 1080 FTW Hydro Copper G.SKILL TridentZ Series 
Hard DriveCoolingCoolingCooling
Samsung EVO 850 500 EK-SBAY Dual DDC 3.2 PWM Serial Alphacool NexXxoS ST30 Full Copper Radiator 360 Hardware Labs Black Ice SR2 Multiport Black Car... 
CoolingCoolingOSMonitor
EK-CoolStream RAD XTC 420 koolance 380i Windows 10 Pro ASUS VW246H Black 24" 2ms 
PowerCaseMouseAudio
SeaSonic M12D SS-850 850W  Thermaltake core x71 CM Storm Sentinel Advance II Corsair Void 
CPUMotherboardGraphicsRAM
X5675@4400 1.344 ASUS P6X58D-E XfX RX480 RS F3-12800CL7T-6GBPI 6-7-6-21 1T 
RAMHard DriveHard DriveHard Drive
F3-12800CL9S-4GBRL WDC WD1001FALS-00J7B1 ST31000340AS WDC WD7500AAKS-00RBA0 
Hard DriveOptical DriveCoolingOS
Hitachi HDS723020BLA642 ihas 624-A SilverStone Heligon HE01 windows 10 64 Pro 
MonitorPowerCase
Vizio 42inch lcd tv CORSAIR CMPSU-950TX Modded Rocketfish 
  hide details  
Reply
post #34 of 35
Thread Starter 
ahh, got it to 4GHz stable for 14 1/2 hours, temps have come up a bit, but I think thats probably more an attribute to the rise in Vcore for stability. I also know that I need to get a little more air in the case, I'll be working on a case mod for that.

Here is the proof

http://valid.x86-secret.com/show_oc?id=218267
    
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4GHz (445x9) on 1.325V (bios) | ASUS Rampage Formula x48 | | BIOS 0410 | Visiontek 4870 790/1100 | 2x2GB G.Skill PI @1069MHz | 1.9V | 5-5-5-15 2T | 
Hard DriveOptical DriveOSMonitor
Seagate 2x320GB 7200.10 in RAID 0 + 250GB 7200.10 Lite-On DVD+-R/RW DL Vista Ultimate x64 42" Aquous @ 1440 x 900 (1920 x 1080 is too small) 
KeyboardPowerCaseMouse
Logitech MX5500 Silverstone DA750 THE Rocketfish Logitech MX Revolution 
Mouse Pad
Neat one from Body Worlds exhibit 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4GHz (445x9) on 1.325V (bios) | ASUS Rampage Formula x48 | | BIOS 0410 | Visiontek 4870 790/1100 | 2x2GB G.Skill PI @1069MHz | 1.9V | 5-5-5-15 2T | 
Hard DriveOptical DriveOSMonitor
Seagate 2x320GB 7200.10 in RAID 0 + 250GB 7200.10 Lite-On DVD+-R/RW DL Vista Ultimate x64 42" Aquous @ 1440 x 900 (1920 x 1080 is too small) 
KeyboardPowerCaseMouse
Logitech MX5500 Silverstone DA750 THE Rocketfish Logitech MX Revolution 
Mouse Pad
Neat one from Body Worlds exhibit 
  hide details  
Reply
post #35 of 35
nice congrats im sure you can go higher
Coeus
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 940 Msi 970a-g46 2x xfx 7970 G Skill NQ PC1333 4x2 
Hard DriveOptical DriveOSMonitor
Seagate 7200.9 160gb need Windows 10 64bit Sharp 32inch 
Power
Thermaltake 1350 
  hide details  
Reply
Coeus
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 940 Msi 970a-g46 2x xfx 7970 G Skill NQ PC1333 4x2 
Hard DriveOptical DriveOSMonitor
Seagate 7200.9 160gb need Windows 10 64bit Sharp 32inch 
Power
Thermaltake 1350 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Any tips on a PD940 (New Build)