Overclock.net › Forums › Intel › Intel CPUs › Need Help Overclocking A E6600 C2d
New Posts  All Forums:Forum Nav:

Need Help Overclocking A E6600 C2d - Page 4

post #31 of 45
Thread Starter 
i run at 22C idle and 32C full load but i was able to get my system to 3.15Ghz and i cnt get highter. it pisses me off
Lurking Ninja
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 3849B203 4.0GHz/1.164 Evga X58 Classified E759/Koolance X58/BIX 120 TRI SLI GTX 285s.** 6GB 3x2 OCZ Gold 1600mhz 
Hard DriveOptical DriveOSMonitor
2x WD3200AAKS (RAID0), 1tb AALS Samsumg Wrigtmaster Sb 204/182 Windows 7 Ultimate X64 Gateway HD2401 24" 
KeyboardPowerCaseMouse
Logitech G15 V1 Corsair HX1000W Modded Rocketfish Logitech MX Revolution 
Mouse Pad
soft cotton? 
  hide details  
Reply
Lurking Ninja
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 3849B203 4.0GHz/1.164 Evga X58 Classified E759/Koolance X58/BIX 120 TRI SLI GTX 285s.** 6GB 3x2 OCZ Gold 1600mhz 
Hard DriveOptical DriveOSMonitor
2x WD3200AAKS (RAID0), 1tb AALS Samsumg Wrigtmaster Sb 204/182 Windows 7 Ultimate X64 Gateway HD2401 24" 
KeyboardPowerCaseMouse
Logitech G15 V1 Corsair HX1000W Modded Rocketfish Logitech MX Revolution 
Mouse Pad
soft cotton? 
  hide details  
Reply
post #32 of 45
My e6600 OC's to 3537MHz @ 9x 393MHz w/1572MHz FSB @ 1.376Vcore With
Gigabyte P35-DS3R mobo/1Gb Corsair DDR2 5400C4 mem @ 491.3MHz/1.89v.
With these settings I Idle @ 16ºC and Load @ 24ºC on Everest/Core Temp.

Gotten her to 3.6Gb unstable.

My BIOS settings include:

Under Advanced BIOS features:
Limit CPUID Max. to 3.............Disabled
CPU Enhanced Halt (C1E)........Disabled
CPU Thermal Monitor 2(TM2)....Disabled
CPU EIST Function.................Disabled

Under MB Intelligent Tweaker(M.I.T.):
C.I.A.2............................Disabled
CPU HostClock Control........Enabled
With all memory and voltage set to manual.

I know your mobos BIOS settings are listed differently,
but hopefully this helps.
  
Reply
  
Reply
post #33 of 45
Quote:
Originally Posted by G|F.E.A.D|Killa View Post
ok i tried setting my ram to sync mode and took my FSB to 400 which put me at 3.6 and ram at 800. it booted up to the windows load screen and then restarted itself. and tah being said could it be my OS. i get the blue screen of death alot. my OS is windows XP media center 2005. (THOUGHT IT WOULD BE COOL TO HAVE. I WAS WRONG IT SUCKS)
You may need more CPU and NorthBridge vCore. Check your motherboard's built in volt monitor (via BIOS) to make sure that there is 1.55v going to both the CPU and NorthBridge.
post #34 of 45
3.6 guys!! hold up for specx
post #35 of 45
Quote:
Originally Posted by Dryadsoul View Post
My e6600 OC's to 3537MHz @ 9x 393MHz w/1572MHz FSB @ 1.376Vcore With
Gigabyte P35-DS3R mobo/1Gb Corsair DDR2 5400C4 mem @ 491.3MHz/1.89v.
With these settings I Idle @ 16ºC and Load @ 24ºC on Everest/Core Temp.

Gotten her to 3.6Gb unstable.

My BIOS settings include:

Under Advanced BIOS features:
Limit CPUID Max. to 3.............Disabled
CPU Enhanced Halt (C1E)........Disabled
CPU Thermal Monitor 2(TM2)....Disabled
CPU EIST Function.................Disabled

Under MB Intelligent Tweaker(M.I.T.):
C.I.A.2............................Disabled
CPU HostClock Control........Enabled
With all memory and voltage set to manual.

I know your mobos BIOS settings are listed differently,
but hopefully this helps.

wow, your specs are close to mine.... but i NEED 1.455 core volts to pass orthos at 3.55

i have booted at 3.8, and run a couple benches, but with a v core of 1.575.... my chip is certainly vcore hungry!
GiNNz!'Z Rig!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @4.02 Ghz Asus P5Q-Turbo BFG GTX 295 OCZ 4GB DDR2 Platinum 800 Mghz 
Hard DriveOptical DriveOSMonitor
2- WD 1000 gig sata II /750 gig external LG 16X lightscribe Windows 7 3 - 19" Dell LCD's/Matrox Triple head2go 
KeyboardPowerCaseMouse
Logitech G-15 Corsair 750 W Cooler Master HAF932 Logicteh Wireless 
Mouse Pad
foam! 
  hide details  
Reply
GiNNz!'Z Rig!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @4.02 Ghz Asus P5Q-Turbo BFG GTX 295 OCZ 4GB DDR2 Platinum 800 Mghz 
Hard DriveOptical DriveOSMonitor
2- WD 1000 gig sata II /750 gig external LG 16X lightscribe Windows 7 3 - 19" Dell LCD's/Matrox Triple head2go 
KeyboardPowerCaseMouse
Logitech G-15 Corsair 750 W Cooler Master HAF932 Logicteh Wireless 
Mouse Pad
foam! 
  hide details  
Reply
post #36 of 45
Quote:
i have booted at 3.8, and run a couple benches, but with a v core of 1.575.... my chip is certainly vcore hungry!
Thats not bad...I need 1.58vcore to be stable at 3.85ghz...[e6700]
post #37 of 45
Quote:
Originally Posted by G|F.E.A.D|Killa View Post
and my cpu voltage is at 1.37 still stock
Hi there,

I can't see anywhere in this thread where you've mentioned going above 1.37vcore (or I have missed it - very tired). If that's the case, getting to 3Ghz on stock voltage is pretty good going, my guess would be up the volts and try again.
Anubis
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500k 3.30GHz (Sandybridge) Socke... Asus P8P67 Intel P67 (Socket 1155) DDR3 Motherb... MSI GeForce GTX 970 Gaming Edition 4096MB GDDR5... 4GB OCZ 
Hard DriveOSMonitorPower
256GB Vertex 4 SATA 6Gb/s 2.5" Solid State Drive Windows 7 Ultimate AOC 27" WLED 2560x1440 VGA DVI-D HDMI DP SuperFlower Golden Green HX 750W "80 Plus Gold"... 
Case
Antec 900 
  hide details  
Reply
Anubis
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500k 3.30GHz (Sandybridge) Socke... Asus P8P67 Intel P67 (Socket 1155) DDR3 Motherb... MSI GeForce GTX 970 Gaming Edition 4096MB GDDR5... 4GB OCZ 
Hard DriveOSMonitorPower
256GB Vertex 4 SATA 6Gb/s 2.5" Solid State Drive Windows 7 Ultimate AOC 27" WLED 2560x1440 VGA DVI-D HDMI DP SuperFlower Golden Green HX 750W "80 Plus Gold"... 
Case
Antec 900 
  hide details  
Reply
post #38 of 45
Thread Starter 
ok i have uped my voltage and still no go. stuck at only 3.15GHz. i got it to poat and load into windows at 3.6 with vcore at 1.55 but i went to run 3dmark06 and she restarted. verysad.
Lurking Ninja
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 3849B203 4.0GHz/1.164 Evga X58 Classified E759/Koolance X58/BIX 120 TRI SLI GTX 285s.** 6GB 3x2 OCZ Gold 1600mhz 
Hard DriveOptical DriveOSMonitor
2x WD3200AAKS (RAID0), 1tb AALS Samsumg Wrigtmaster Sb 204/182 Windows 7 Ultimate X64 Gateway HD2401 24" 
KeyboardPowerCaseMouse
Logitech G15 V1 Corsair HX1000W Modded Rocketfish Logitech MX Revolution 
Mouse Pad
soft cotton? 
  hide details  
Reply
Lurking Ninja
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 3849B203 4.0GHz/1.164 Evga X58 Classified E759/Koolance X58/BIX 120 TRI SLI GTX 285s.** 6GB 3x2 OCZ Gold 1600mhz 
Hard DriveOptical DriveOSMonitor
2x WD3200AAKS (RAID0), 1tb AALS Samsumg Wrigtmaster Sb 204/182 Windows 7 Ultimate X64 Gateway HD2401 24" 
KeyboardPowerCaseMouse
Logitech G15 V1 Corsair HX1000W Modded Rocketfish Logitech MX Revolution 
Mouse Pad
soft cotton? 
  hide details  
Reply
post #39 of 45
Quote:
Originally Posted by G|F.E.A.D|Killa View Post
ok i have uped my voltage and still no go. stuck at only 3.15GHz. i got it to poat and load into windows at 3.6 with vcore at 1.55 but i went to run 3dmark06 and she restarted. verysad.
Are you not happy with 3.15?

Check the temps at 1.55 volts
Workoholic
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K P8Z68-V PRO NVIDIA GeForce GTX 570 G.Skill 
Hard DriveOptical DriveOSMonitor
Intel 520 Series ASUS DVD+RW Windows 7 Ultimate 20.1" Samsung 
KeyboardPowerCaseMouse
Logitech G15 Corsair 620 Modular Lian Li V1020B G9x 
Mouse Pad
Custom Cloth Pad 
  hide details  
Reply
Workoholic
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600K P8Z68-V PRO NVIDIA GeForce GTX 570 G.Skill 
Hard DriveOptical DriveOSMonitor
Intel 520 Series ASUS DVD+RW Windows 7 Ultimate 20.1" Samsung 
KeyboardPowerCaseMouse
Logitech G15 Corsair 620 Modular Lian Li V1020B G9x 
Mouse Pad
Custom Cloth Pad 
  hide details  
Reply
post #40 of 45
I only managed to get 3.06Ghz on 1.46V (set), 1.42 (read). Not all chips are created equal, unfortunately.

Temps were hitting 58C under load, that was with a mediocre cooler. I'll try again tomorrow once I've installed the Tuniq Tower that should be arriving.
Anubis
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500k 3.30GHz (Sandybridge) Socke... Asus P8P67 Intel P67 (Socket 1155) DDR3 Motherb... MSI GeForce GTX 970 Gaming Edition 4096MB GDDR5... 4GB OCZ 
Hard DriveOSMonitorPower
256GB Vertex 4 SATA 6Gb/s 2.5" Solid State Drive Windows 7 Ultimate AOC 27" WLED 2560x1440 VGA DVI-D HDMI DP SuperFlower Golden Green HX 750W "80 Plus Gold"... 
Case
Antec 900 
  hide details  
Reply
Anubis
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-2500k 3.30GHz (Sandybridge) Socke... Asus P8P67 Intel P67 (Socket 1155) DDR3 Motherb... MSI GeForce GTX 970 Gaming Edition 4096MB GDDR5... 4GB OCZ 
Hard DriveOSMonitorPower
256GB Vertex 4 SATA 6Gb/s 2.5" Solid State Drive Windows 7 Ultimate AOC 27" WLED 2560x1440 VGA DVI-D HDMI DP SuperFlower Golden Green HX 750W "80 Plus Gold"... 
Case
Antec 900 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Need Help Overclocking A E6600 C2d