Overclock.net › Forums › Software, Programming and Coding › Operating Systems › Linux, Unix › PerlMon - CPU-z like program for linux
New Posts  All Forums:Forum Nav:

PerlMon - CPU-z like program for linux - Page 37

post #361 of 376
Quote:
Originally Posted by GodofGrunts View Post
I hate this motherboad to be honest. It flakes out like crazy and I haven't tried to do lm-sensors
flakes out like crazy on what?

This mobo overclocks beautifully for me(I run 24/7 4.10Ghz 1.5v, NB2800 1.35v on Air).. no clue where you see a flake out

Even on Linux it works fine for me.. its just the sensors that don't work, at least the one I cared about reading "the cores temps" that is accurate(1 core reading is enough for me, since through windows all my cores run the same) - since I always run above 4Ghz I need to pay attention to only that... but I wished it detected everything rpms, voltages.. and all voltages through linux.. on windows side it detects everything & works awesome.

Eitherway as for the Linux OS running it.... works perfectly fine, lan, video(video editing), audio(also works fine on audio studio recording), even my CF(obviously ATI sucks on gaming on linux side, Nvidia is much more supported on linux) & every upgrade seems fine.... Even on OSX as well(my CF works Full QE/CI/CL on 10.6.4, wifi, Lan, sound, etc... just about everything)... so can you explain to me where does this Motherboard flakes out for you?

Let's not forget this board supports the SLI Nvidia patching... so its not ATI crossfireX only compatible.. after patching you can even 3-way SLI

Only board I hate since IT DOES FLAKE OUT is the 890 version which came out horribly bad... defective from factory, ton's have died on very simple overclocks, stuff getting fried, other had many ram issues(even using compatible rams), BSOD randomly even on stock settings & as well having issues of not letting them install an OS.. all sorts of issues happened on that board.. not even RMA solved them. If you go to the club you will read posts of people just giving up on that msi board and switching to the crosshair & some even going back to the 790 version.

So compared that board to the 790 version we both have... ours is beautiful So, I ask... why do you hate this board "I hate this motherboad to be honest. It flakes out like crazy"?
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
post #362 of 376
Quote:
Originally Posted by sendblink23 View Post
flakes out like crazy on what?

This mobo overclocks beautifully for me(I run 24/7 4.10Ghz 1.5v, NB2800 1.35v on Air).. no clue where you see a flake out

Even on Linux it works fine for me.. its just the sensors that don't work, at least the one I cared about reading "the cores temps" that is accurate(1 core reading is enough for me, since through windows all my cores run the same) - since I always run above 4Ghz I need to pay attention to only that... but I wished it detected everything rpms, voltages.. and all voltages through linux.. on windows side it detects everything & works awesome.

Eitherway as for the Linux OS running it.... works perfectly fine, lan, video(video editing), audio(also works fine on audio studio recording), even my CF(obviously ATI sucks on gaming on linux side, Nvidia is much more supported on linux) & every upgrade seems fine.... Even on OSX as well(my CF works Full QE/CI/CL on 10.6.4, wifi, Lan, sound, etc... just about everything)... so can you explain to me where does this Motherboard flakes out for you?

Let's not forget this board supports the SLI Nvidia patching... so its not ATI crossfireX only compatible.. after patching you can even 3-way SLI

Only board I hate since IT DOES FLAKE OUT is the 890 version which came out horribly bad... defective from factory, ton's have died on very simple overclocks, stuff getting fried, other had many ram issues(even using compatible rams), BSOD randomly even on stock settings & as well having issues of not letting them install an OS.. all sorts of issues happened on that board.. not even RMA solved them. If you go to the club you will read posts of people just giving up on that msi board and switching to the crosshair & some even going back to the 790 version.

So compared that board to the 790 version we both have... ours is beautiful So, I ask... why do you hate this board "I hate this motherboad to be honest. It flakes out like crazy"?
This is not the thread for this, but long story short:
Both Nics have gone out, on board sound has gone out, board won't overclock pass 200 mhz, if my mouse and keyboard are plugged in at the same time it freezes at post, new sound card causes blue screen/kernel panic if I plug my mic in. Worse board I've ever owned.
Damit
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II x4 965 Black MSI 790FX-GD70 Asus ATI 5850 4x2 GBs RipJaw DDR3 1066 MHz 
Hard DriveOptical DriveOSMonitor
RAID 0 500 GB WD Black Lite-On Blue Ray, Samsung DVD Arch Linux/Ubuntu 10.04 25.5" Samsung 
KeyboardPowerCaseMouse
PS2 by Compaq 750 Watt COOLER MASTER Elite RC-332-KKN1-GP Death Adder 
Mouse Pad
Custom 
  hide details  
Reply
Damit
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II x4 965 Black MSI 790FX-GD70 Asus ATI 5850 4x2 GBs RipJaw DDR3 1066 MHz 
Hard DriveOptical DriveOSMonitor
RAID 0 500 GB WD Black Lite-On Blue Ray, Samsung DVD Arch Linux/Ubuntu 10.04 25.5" Samsung 
KeyboardPowerCaseMouse
PS2 by Compaq 750 Watt COOLER MASTER Elite RC-332-KKN1-GP Death Adder 
Mouse Pad
Custom 
  hide details  
Reply
post #363 of 376
I am planning on overclocking my cpu, but i need the cpu temps first, unfortunately i have failed to find anything that is able to read the cpu temps, i know that it's there, because my BIOS reads it just fine. I also know my hard drive has a temp monitor in it as well, but i can't get anything to pick it up either. However I am getting some errors when I execute it, here is what i get when i run perlmon:

iab@iab-desktop:~/Desktop/PerlMon-0.2.0$ perlmon -n
################################################## ############################
Start
################################################## ############################

PerlMon: version 0.2.0

The PerlMon report tool.

This program is used to view hardware information and Operating System
settings.

Copyright (c) 2007, 2008 Michael John <perlmon.linux@gmail.com>

PerlMon is Licence under the GNU General Public License.
This program comes with ABSOLUTELY NO WARRANTY.

Use of uninitialized value $_[1] in substitution (s///) at /usr/local/share/perl/5.10.1/PerlMon/WMDE.pm line 91.
Warning: something's wrong at /usr/local/share/perl/5.10.1/PerlMon/Sensors.pm line 66.
################################################## ############################
Operating System Info
################################################## ############################
iab @ iab-desktop
Uptime: 3 days 3 hours 26 minutes

OS: GNU/Linux
Distro: Ubuntu 10.04 (lucid)
WM: compiz 0.8.4
DE: GNOME nautilus 2.30.1

Window Theme:
Color Scheme:
Icon set:
Font:

Kernel release: 2.6.32-24-generic
Kernel version: #43-Ubuntu SMP Thu Sep 16 14:17:33 UTC 2010

################################################## ############################
CPU Info
################################################## ############################
CPU Vendor: GenuineIntel
CPU Model: Intel(R) Xeon(TM) CPU 2.40GHz
CPU Arch: i686
CPU Family: 15
CPU Model : 2
CPU Stepping: 7
Instructions : mmx, sse, sse2

CPU speed: 2399.733
CPU L1: 12K + 12K
CPU L2: 512 KB

################################################## ############################
Memory and Swap Info
################################################## ############################
Total Memory: 2013 MB
Used Memory: 1871 MB
Free Memory: 142 MB
Total Swap: 4766 MB
Used Swap: 224 MB
Free Swap: 4542 MB
Swappiness: 60

################################################## ############################
Hard Drive Info
################################################## ############################
/dev/sda2 mounted at / Type: ext2 Total size: 454G
none mounted at /dev Type: devtmpfs Total size: 1003M
none mounted at /var/lib/ureadahead/debugfs Type: debugfs Total size: 454G

################################################## ############################
Monitor Info
################################################## ############################
Resolution: 1024 x 768
Refresh Rate: 86 Hz
Depth: 24
Color: TrueColor

################################################## ############################
GPU Info
################################################## ############################
Number of GPUs: 1
Name: GeForce 8400 GS
Video RAM: 512 MB
Core Temp: 40 C
Ambient Temp: Unknown C
Clocks: 567 , 333
Twin view: Off
Nvidia Driver Version: 195.36.24
Nvidia Control Version: 1.22
OpenGL Version: 3.2.0


################################################## ############################
Sensors
################################################## ############################
CPU voltage: Unknown
+3.3V: Unknown
+5V: Unknown
+12V: Unknown
-12V: Unknown
-5V: Unknown
Fan1: 0 RPM
Fan2: 0 RPM
Fan3: 4017 RPM
Mainboard temp: Unknown
CPU temp: Unknown C
Other temp: Unknown C



it also doesn't seem to be picking up any of my fans except for my right-most RAM fan, the other fan on that cpu it doesn't pick up. it also isn't picking up my 10k rpm cpu fans. It does at the very least pick up my GPU temp, but that doesn't do me much good, because that doesn't like to be overclocked at all. It's also only picking up 1 of my 2 monitors, though that may be because they're seperate X sessions.
Dual Xeon Server
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel(R) Xeon(TM) CPU 2.40GHz Tyan S2722-533 GeForce 8400 GS 2GB Crucial 
Hard DriveOptical DriveOSMonitor
500 GB Seagate Barricuda 52x DVD Ubuntu 10.04 32-Bit 1 emachines CRT & 1 Compaq CRT 
Power
500 Watt RocketFish 
  hide details  
Reply
Dual Xeon Server
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel(R) Xeon(TM) CPU 2.40GHz Tyan S2722-533 GeForce 8400 GS 2GB Crucial 
Hard DriveOptical DriveOSMonitor
500 GB Seagate Barricuda 52x DVD Ubuntu 10.04 32-Bit 1 emachines CRT & 1 Compaq CRT 
Power
500 Watt RocketFish 
  hide details  
Reply
post #364 of 376
blah you need to install lm_sensors. Start /usr/bin/sensors and since it is the first time it has been run, it will prompt you with a series of questions.

Just answer y to the probe questions, and the rest is pretty evident. After all of the questions you will have a working sensors.conf.

You need to make the daemon start at boot time as well if you don't want to have to start it manually each time.
Acpi may have already detected sensors, which you can find in:
Code:
/proc/acpi/thermal_zone
My laptop has one sensor that is detected by a kernel module, while my desktop has none.
PWNzershreck
(15 items)
 
  
CPUMotherboardGraphicsRAM
4930K @ 4.6 GHz ASUS Rampage IV Black Edition Trifire 290X 16 GB Corsair Vengeance 1600C9 
Hard DriveOptical DriveCoolingOS
2x Samsung 840 Pro  ASUS DVD-RW SATA Koolance 380i & 2x HW Labs 480GTX Arch Linux x86_64, Windows 7 x64 
MonitorKeyboardPowerCase
3x ASUS VS278Q Eyefinity Ducky Corsair AX1200i Caselabs STH10 
MouseMouse PadAudio
Logitech G500 Func 1030 ASUS Xonar Essence STX 
  hide details  
Reply
PWNzershreck
(15 items)
 
  
CPUMotherboardGraphicsRAM
4930K @ 4.6 GHz ASUS Rampage IV Black Edition Trifire 290X 16 GB Corsair Vengeance 1600C9 
Hard DriveOptical DriveCoolingOS
2x Samsung 840 Pro  ASUS DVD-RW SATA Koolance 380i & 2x HW Labs 480GTX Arch Linux x86_64, Windows 7 x64 
MonitorKeyboardPowerCase
3x ASUS VS278Q Eyefinity Ducky Corsair AX1200i Caselabs STH10 
MouseMouse PadAudio
Logitech G500 Func 1030 ASUS Xonar Essence STX 
  hide details  
Reply
post #365 of 376
i already have the lm-sensors installed, and i have run it, yet i still get that....
Dual Xeon Server
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel(R) Xeon(TM) CPU 2.40GHz Tyan S2722-533 GeForce 8400 GS 2GB Crucial 
Hard DriveOptical DriveOSMonitor
500 GB Seagate Barricuda 52x DVD Ubuntu 10.04 32-Bit 1 emachines CRT & 1 Compaq CRT 
Power
500 Watt RocketFish 
  hide details  
Reply
Dual Xeon Server
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel(R) Xeon(TM) CPU 2.40GHz Tyan S2722-533 GeForce 8400 GS 2GB Crucial 
Hard DriveOptical DriveOSMonitor
500 GB Seagate Barricuda 52x DVD Ubuntu 10.04 32-Bit 1 emachines CRT & 1 Compaq CRT 
Power
500 Watt RocketFish 
  hide details  
Reply
post #366 of 376
Quote:
Originally Posted by blah38621 View Post
i already have the lm-sensors installed, and i have run it, yet i still get that....
You went through all of the configuration prompts and answered yes to all of the probe questions? If so then I would try uninstalling the package, deleting all of the remaining conf files, then running it again.

Then again I guess it's possible that both lm_sensors and the kernel don't support any of the sensors on your motherboard.....

AFAIK your CPU should always be able to report temps though.....as long as you have the newer Intel and AMD ones that have embedded sensors in the die. I'm not sure what CPU you have because your system specs aren't filled out.
PWNzershreck
(15 items)
 
  
CPUMotherboardGraphicsRAM
4930K @ 4.6 GHz ASUS Rampage IV Black Edition Trifire 290X 16 GB Corsair Vengeance 1600C9 
Hard DriveOptical DriveCoolingOS
2x Samsung 840 Pro  ASUS DVD-RW SATA Koolance 380i & 2x HW Labs 480GTX Arch Linux x86_64, Windows 7 x64 
MonitorKeyboardPowerCase
3x ASUS VS278Q Eyefinity Ducky Corsair AX1200i Caselabs STH10 
MouseMouse PadAudio
Logitech G500 Func 1030 ASUS Xonar Essence STX 
  hide details  
Reply
PWNzershreck
(15 items)
 
  
CPUMotherboardGraphicsRAM
4930K @ 4.6 GHz ASUS Rampage IV Black Edition Trifire 290X 16 GB Corsair Vengeance 1600C9 
Hard DriveOptical DriveCoolingOS
2x Samsung 840 Pro  ASUS DVD-RW SATA Koolance 380i & 2x HW Labs 480GTX Arch Linux x86_64, Windows 7 x64 
MonitorKeyboardPowerCase
3x ASUS VS278Q Eyefinity Ducky Corsair AX1200i Caselabs STH10 
MouseMouse PadAudio
Logitech G500 Func 1030 ASUS Xonar Essence STX 
  hide details  
Reply
post #367 of 376
it's now filled out, at least as much as i know about it is, i bought the case, board, cpu's, an 8 drive sata raid array card, a sound card, 2gb of ram, and a remote access card, for $75. (admittedly it came with no screws or wires other than the case led's to the board, but it was an old server to begin with) and although I bought the speakers, I bought them almost 10 years ago, and no longer have the box for them. Why would I need the box you ask? Why it's because other than the power and volume labels, the only other label on it is Multimedia Speaker System, and that's not very helpful )
Edited by blah38621 - 10/2/10 at 5:12pm
Dual Xeon Server
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel(R) Xeon(TM) CPU 2.40GHz Tyan S2722-533 GeForce 8400 GS 2GB Crucial 
Hard DriveOptical DriveOSMonitor
500 GB Seagate Barricuda 52x DVD Ubuntu 10.04 32-Bit 1 emachines CRT & 1 Compaq CRT 
Power
500 Watt RocketFish 
  hide details  
Reply
Dual Xeon Server
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel(R) Xeon(TM) CPU 2.40GHz Tyan S2722-533 GeForce 8400 GS 2GB Crucial 
Hard DriveOptical DriveOSMonitor
500 GB Seagate Barricuda 52x DVD Ubuntu 10.04 32-Bit 1 emachines CRT & 1 Compaq CRT 
Power
500 Watt RocketFish 
  hide details  
Reply
post #368 of 376
Hey! I'm getting also that "Can't locate etc. etc." error message, but it says can't locate "warnings.***" or something.... Please can you help me?

EDIT:

Quote:
Can't locate ./settings/Settings.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at HD.pm line 24.
Compilation failed in require at perlmon line 30.
BEGIN failed--compilation aborted at perlmon line 30.
dave@p4-2600:~/PerlMon-0.1.0$

similar that above but files that can't locate are "warnings.pm"
OS: Linux Ubuntu 7.04
and Perlmon version 0.2.0

plz help !
Edited by arseScratcha - 5/15/11 at 5:14am
post #369 of 376
I'm having trouble uninstalling PerlMon.
How can I do that?
00s
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon64 X2 5400+ @3.0Ghz 'Brisbane' G2 Foxconn VSCOM A6VMX (AMD690V) MSI Radeon HD4850 512Mb @715/1045 2x2Gb DDR2 Crucial Ballistix 
Hard DriveOptical DriveOSMonitor
2x 500Gb WD Blue RAID0 LG DVDRW Win7 x64 AOC LM722 1280x1024 
KeyboardPowerCaseMouse
A4Tech X7 G800 Corsair VX450 Akasa X2 Freedom MS Intellimouse 1.1 Black 
Mouse Pad
Everglide Titan 
  hide details  
Reply
00s
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon64 X2 5400+ @3.0Ghz 'Brisbane' G2 Foxconn VSCOM A6VMX (AMD690V) MSI Radeon HD4850 512Mb @715/1045 2x2Gb DDR2 Crucial Ballistix 
Hard DriveOptical DriveOSMonitor
2x 500Gb WD Blue RAID0 LG DVDRW Win7 x64 AOC LM722 1280x1024 
KeyboardPowerCaseMouse
A4Tech X7 G800 Corsair VX450 Akasa X2 Freedom MS Intellimouse 1.1 Black 
Mouse Pad
Everglide Titan 
  hide details  
Reply
post #370 of 376
I don't see any download links in the post, where the link from first post redirects. Am I doing something wrong? Where can I download latest version of PerlMon? Please help!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Linux, Unix
Overclock.net › Forums › Software, Programming and Coding › Operating Systems › Linux, Unix › PerlMon - CPU-z like program for linux