TAT may not work on some motherboards
There are still other programs than TAT to give you temps. Two programs that I recommend after TAT are CoreTemp 0.94 (0.95 is very buggy) and EVEREST 2007 Beta. I don't recommend SpeedFan due to it's whacky detections. @_@ You may download it if you want.CoreTemp 0.94
- Just open and you'll see the temps.EVEREST 2007 Beta
Download EVEREST > Install > Open Everest and select Computer on the left > Find and select Sensors. You'll see --
CPU - Do not look at this temp.
CPU #1 / Core #2 - Look at this temp.
CPU #2 / Core #2 - Look at this temp.
One of the majority programs that we use to check our loads temps and CPU stability is Orthos
Download > Install > Select Stress CPU with Gromics > Start
Orthos is recommended to run at least 8 hours without errors. If your temps gets too high, stop the process.
Do not exceed 60C load.