So I was wrong about two points, shame on me. What do you have to say about my other points?
This really is a waste of time, has nothing to do with OP. But you can take the plexi off or you could use the grill type cover that comes with it. But I am pretty sure those fans are there to blow air onto the gfx cards and mobo (as I have stated several times before). While doing smoke tests the case is a wind tunnel I would put it up against the wind tunnel (ie antec 900). Also I bet just about everybody that purchases a 900 dollar case would probably purchase new fans with better dba ratings anyways as coolermaster isnt known for extremely quiet fans. I checked it out the paint on the case costs at least 120 an ounce, think minimum 6 colors at about an ounce a piece plus primer and about 5 clears on top. I bet in paint alone they spent 250 dollars. Imagine total time put into the actual painting of the case (paint time, sand time, wait time) 8 to 10 hours. If you were fairly skilled what would you charge for hourly wage???
I make about 18 dollars an hour as a service tech, if I could paint like that I would charge probably about 40 an hour. I just said 40 and my buddy started laughing hysterically and he said try double so lets say 60 now lets say you only work for 4 of those 8 hours (60 x 4 = 240) plus paint that equals 590 plus a 250 case = 840 plus free shipping and a warranty (shipping costs if werent free was 130 fed ex) makes 900 not seem so high huh???