Overclock.net › Forums › AMD › AMD CPUs › Brisbane 3600 help me oc this!!!
New Posts  All Forums:Forum Nav:

Brisbane 3600 help me oc this!!! - Page 4

post #31 of 114
The BIOS should be reflecting 80% of the full load in windows.
    
CPUMotherboardGraphicsRAM
X4 965 ASUS M4A79 Deluxe 9800GTx2 2x2G OCZ Reapers 
Hard DriveOptical DriveOSMonitor
500G WD Black LiteOn CD/DVD R/W Win7 64 22'' ws Acer AL2223W 
KeyboardPowerMouse
MS KU462 Natural SS DA750 MS 5 button 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
X4 965 ASUS M4A79 Deluxe 9800GTx2 2x2G OCZ Reapers 
Hard DriveOptical DriveOSMonitor
500G WD Black LiteOn CD/DVD R/W Win7 64 22'' ws Acer AL2223W 
KeyboardPowerMouse
MS KU462 Natural SS DA750 MS 5 button 
  hide details  
Reply
post #32 of 114
You have the fan on the 9500 towards the front of the case so it blows out the back right?Either your brisbane is just reporting bad readings or their is bad heat transfer between the CPU and the cooler.When I lapped my CPU and cooler it made little difference in the idle temps but was 8c cooler under load.I would lap the cooler just to rule it out.It's very easy and doesn't take long.
GAMER
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 750 Intel DP55KG Gigabyte HD6950 2GB 880/1375 1536 shaders stock v 4 GB DDR3-1333 HyperX 
Hard DriveOptical DriveOSMonitor
1 TB Blue Ray Windows 7 HP 64 3-22" LCD's 1680x1050=5040x1050 Eyefinity 
PowerCase
Corsair HX650 CM Storm Sniper 
  hide details  
Reply
GAMER
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 750 Intel DP55KG Gigabyte HD6950 2GB 880/1375 1536 shaders stock v 4 GB DDR3-1333 HyperX 
Hard DriveOptical DriveOSMonitor
1 TB Blue Ray Windows 7 HP 64 3-22" LCD's 1680x1050=5040x1050 Eyefinity 
PowerCase
Corsair HX650 CM Storm Sniper 
  hide details  
Reply
post #33 of 114
Here's my experience with it:

1. DO NOT CHANGE THE MULITPLIER- I have had nothing but problems anytime I changed the multi no matter what other settings were applied.

2. Set your HT multi to 3x

3. Set your RAM lowest it can go and put the voltage to the specified volts....or 2.1 which is the safe zone for most ddr2

4. set your VCore to 1.35 - 1.5

5. download latest bios if needed.

My motherboard maxes at 290 FSB and I use 1.35 rock solid vcore for my cpu at that FSB. Which is 2.74ghz My cpu could go higher with a better board.
New Rig 2/14/08
(13 items)
 
  
CPUMotherboardGraphicsRAM
e6400 GIGABYTE GA-P35-DS3L Radeon HD3850 512mb 2x1gig G.Skill 6400 
Hard DriveMonitorPower
WD 160gig Acer 22" Ws Sunbeam 550w 
  hide details  
Reply
New Rig 2/14/08
(13 items)
 
  
CPUMotherboardGraphicsRAM
e6400 GIGABYTE GA-P35-DS3L Radeon HD3850 512mb 2x1gig G.Skill 6400 
Hard DriveMonitorPower
WD 160gig Acer 22" Ws Sunbeam 550w 
  hide details  
Reply
post #34 of 114
Here are some settings I used but CPU's vary so you might need less or more vcore.Try with less first and increase to get it stable if you need.

X2 3600 Brisbane 9.5 Multiplier

FSB HT Multiplier CPU Speed CPU Voltage DDR2 800 Setting
200 x5 1.9Ghz 1.25/1.35v 400Mhz
211 x5 2.0Ghz 333Mhz
222 x4 2.1Ghz
232 x4 2.2Ghz
243 x4 2.3Ghz
253 x4 2.4Ghz
264 x4 2.5Ghz 266Mhz
274 x3 2.6Ghz
285 x3 2.7Ghz 1.35/1.40v
295 x3 2.8Ghz
306 x3 2.9Ghz 1.40/1.45v 200Mhz
316 x3 3.0Ghz 1.45/1.475v
327 x3 3.1Ghz ?
337 x3 3.2Ghz ?

Sorry I copy and pasted from notepad and it screwed up.
GAMER
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 750 Intel DP55KG Gigabyte HD6950 2GB 880/1375 1536 shaders stock v 4 GB DDR3-1333 HyperX 
Hard DriveOptical DriveOSMonitor
1 TB Blue Ray Windows 7 HP 64 3-22" LCD's 1680x1050=5040x1050 Eyefinity 
PowerCase
Corsair HX650 CM Storm Sniper 
  hide details  
Reply
GAMER
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 750 Intel DP55KG Gigabyte HD6950 2GB 880/1375 1536 shaders stock v 4 GB DDR3-1333 HyperX 
Hard DriveOptical DriveOSMonitor
1 TB Blue Ray Windows 7 HP 64 3-22" LCD's 1680x1050=5040x1050 Eyefinity 
PowerCase
Corsair HX650 CM Storm Sniper 
  hide details  
Reply
post #35 of 114
Which Gskill do you have?You should manualy set the memory voltage and timings.
GAMER
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 750 Intel DP55KG Gigabyte HD6950 2GB 880/1375 1536 shaders stock v 4 GB DDR3-1333 HyperX 
Hard DriveOptical DriveOSMonitor
1 TB Blue Ray Windows 7 HP 64 3-22" LCD's 1680x1050=5040x1050 Eyefinity 
PowerCase
Corsair HX650 CM Storm Sniper 
  hide details  
Reply
GAMER
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 750 Intel DP55KG Gigabyte HD6950 2GB 880/1375 1536 shaders stock v 4 GB DDR3-1333 HyperX 
Hard DriveOptical DriveOSMonitor
1 TB Blue Ray Windows 7 HP 64 3-22" LCD's 1680x1050=5040x1050 Eyefinity 
PowerCase
Corsair HX650 CM Storm Sniper 
  hide details  
Reply
post #36 of 114
Thread Starter 
Ok, Ok... right now i have the side panel open and i installed another 120mm fan just inside the empty drine bays about 3in in front of the 9500 and there is little difference in temps. The first temp in speedfan hovers at 39c which i know is high but isn't the core temp i should be most concerned with? Should i try to drop down my core voltage by the next setting and see if this will boot and see if it makes a difference in my temps? I want to be up there with you pros at 2.9/3.0 overclocks. Is there anything else i can try?
My CM sniper
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.8ghz @ 1.4v. ASRock Z68 EXTREME4 GEN3 EVGA gtx470 SC GSKILL SNIPER DDR3 1600 2X4 9.9.9.24 
Hard DriveOptical DriveOSMonitor
CRUCIAL 64GB SSD 1-VR300 4X F3 1TB SAMSUNG 22X SATA DVD BURNER WINDOWZ 7 64BIT 23'' ACER P235H WS 
KeyboardPowerCaseMouse
LOGITECH G15 V 2007 CORSAIR TX750 CM STORM SNIPER/ MODDED OCZ DOMINATRIX 
Mouse PadAudio
ALL OVER THE TABLE ON BOARD 
  hide details  
Reply
My CM sniper
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.8ghz @ 1.4v. ASRock Z68 EXTREME4 GEN3 EVGA gtx470 SC GSKILL SNIPER DDR3 1600 2X4 9.9.9.24 
Hard DriveOptical DriveOSMonitor
CRUCIAL 64GB SSD 1-VR300 4X F3 1TB SAMSUNG 22X SATA DVD BURNER WINDOWZ 7 64BIT 23'' ACER P235H WS 
KeyboardPowerCaseMouse
LOGITECH G15 V 2007 CORSAIR TX750 CM STORM SNIPER/ MODDED OCZ DOMINATRIX 
Mouse PadAudio
ALL OVER THE TABLE ON BOARD 
  hide details  
Reply
post #37 of 114
Thread Starter 
Ok, Ok... right now i have the side panel open and i installed another 120mm fan just inside the empty drine bays about 3in in front of the 9500 and there is little difference in temps. The first temp in speedfan hovers at 39c which i know is high but isn't the core temp i should be most concerned with? Should i try to drop down my core voltage by the next setting and see if this will boot and see if it makes a difference in my temps? I want to be up there with you pros at 2.9/3.0 overclocks. Is there anything else i can try?
My CM sniper
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.8ghz @ 1.4v. ASRock Z68 EXTREME4 GEN3 EVGA gtx470 SC GSKILL SNIPER DDR3 1600 2X4 9.9.9.24 
Hard DriveOptical DriveOSMonitor
CRUCIAL 64GB SSD 1-VR300 4X F3 1TB SAMSUNG 22X SATA DVD BURNER WINDOWZ 7 64BIT 23'' ACER P235H WS 
KeyboardPowerCaseMouse
LOGITECH G15 V 2007 CORSAIR TX750 CM STORM SNIPER/ MODDED OCZ DOMINATRIX 
Mouse PadAudio
ALL OVER THE TABLE ON BOARD 
  hide details  
Reply
My CM sniper
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.8ghz @ 1.4v. ASRock Z68 EXTREME4 GEN3 EVGA gtx470 SC GSKILL SNIPER DDR3 1600 2X4 9.9.9.24 
Hard DriveOptical DriveOSMonitor
CRUCIAL 64GB SSD 1-VR300 4X F3 1TB SAMSUNG 22X SATA DVD BURNER WINDOWZ 7 64BIT 23'' ACER P235H WS 
KeyboardPowerCaseMouse
LOGITECH G15 V 2007 CORSAIR TX750 CM STORM SNIPER/ MODDED OCZ DOMINATRIX 
Mouse PadAudio
ALL OVER THE TABLE ON BOARD 
  hide details  
Reply
post #38 of 114
Thread Starter 
Ok, i now have the side panel off and installed a 120mm fan just inside a couple of the bay drives with the air flow twards the 9500 and i'm ideling at 39c. I also did the finger test! I put my finger on one or two of the heat pipes and the base of the HS and they are cool to the touch not hot at all. They should at least be warm right? Well a guess i'm on myway to pckits.com for some supplies. BTW is it possible to have as5 that might be old and may not be any good and wont cool the cpu?
My CM sniper
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.8ghz @ 1.4v. ASRock Z68 EXTREME4 GEN3 EVGA gtx470 SC GSKILL SNIPER DDR3 1600 2X4 9.9.9.24 
Hard DriveOptical DriveOSMonitor
CRUCIAL 64GB SSD 1-VR300 4X F3 1TB SAMSUNG 22X SATA DVD BURNER WINDOWZ 7 64BIT 23'' ACER P235H WS 
KeyboardPowerCaseMouse
LOGITECH G15 V 2007 CORSAIR TX750 CM STORM SNIPER/ MODDED OCZ DOMINATRIX 
Mouse PadAudio
ALL OVER THE TABLE ON BOARD 
  hide details  
Reply
My CM sniper
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.8ghz @ 1.4v. ASRock Z68 EXTREME4 GEN3 EVGA gtx470 SC GSKILL SNIPER DDR3 1600 2X4 9.9.9.24 
Hard DriveOptical DriveOSMonitor
CRUCIAL 64GB SSD 1-VR300 4X F3 1TB SAMSUNG 22X SATA DVD BURNER WINDOWZ 7 64BIT 23'' ACER P235H WS 
KeyboardPowerCaseMouse
LOGITECH G15 V 2007 CORSAIR TX750 CM STORM SNIPER/ MODDED OCZ DOMINATRIX 
Mouse PadAudio
ALL OVER THE TABLE ON BOARD 
  hide details  
Reply
post #39 of 114
I had mine at 1.3v until about 2.7Ghz but CPU's vary.Your temps shouldn't rise much until you start upping the voltage.You can also find wet-dry sandpaper at a good hardware or auto parts.I got 400-600-1000 and 1500 grit from my local hardware.
GAMER
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 750 Intel DP55KG Gigabyte HD6950 2GB 880/1375 1536 shaders stock v 4 GB DDR3-1333 HyperX 
Hard DriveOptical DriveOSMonitor
1 TB Blue Ray Windows 7 HP 64 3-22" LCD's 1680x1050=5040x1050 Eyefinity 
PowerCase
Corsair HX650 CM Storm Sniper 
  hide details  
Reply
GAMER
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 750 Intel DP55KG Gigabyte HD6950 2GB 880/1375 1536 shaders stock v 4 GB DDR3-1333 HyperX 
Hard DriveOptical DriveOSMonitor
1 TB Blue Ray Windows 7 HP 64 3-22" LCD's 1680x1050=5040x1050 Eyefinity 
PowerCase
Corsair HX650 CM Storm Sniper 
  hide details  
Reply
post #40 of 114
Thread Starter 
I have 2gb of gskill ddr2 pc26400 5 5 5 15 2t factory, i have not touched them yet as i'm not quite sure. Right now in my advanced voltage control settings are all set to auto, and my dram configuration is mem clock freq ddr2 667, tcl-auto, trcd-auto, trp-auto, tras-auto, 2t and voltage 1.95.
My CM sniper
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.8ghz @ 1.4v. ASRock Z68 EXTREME4 GEN3 EVGA gtx470 SC GSKILL SNIPER DDR3 1600 2X4 9.9.9.24 
Hard DriveOptical DriveOSMonitor
CRUCIAL 64GB SSD 1-VR300 4X F3 1TB SAMSUNG 22X SATA DVD BURNER WINDOWZ 7 64BIT 23'' ACER P235H WS 
KeyboardPowerCaseMouse
LOGITECH G15 V 2007 CORSAIR TX750 CM STORM SNIPER/ MODDED OCZ DOMINATRIX 
Mouse PadAudio
ALL OVER THE TABLE ON BOARD 
  hide details  
Reply
My CM sniper
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.8ghz @ 1.4v. ASRock Z68 EXTREME4 GEN3 EVGA gtx470 SC GSKILL SNIPER DDR3 1600 2X4 9.9.9.24 
Hard DriveOptical DriveOSMonitor
CRUCIAL 64GB SSD 1-VR300 4X F3 1TB SAMSUNG 22X SATA DVD BURNER WINDOWZ 7 64BIT 23'' ACER P235H WS 
KeyboardPowerCaseMouse
LOGITECH G15 V 2007 CORSAIR TX750 CM STORM SNIPER/ MODDED OCZ DOMINATRIX 
Mouse PadAudio
ALL OVER THE TABLE ON BOARD 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Brisbane 3600 help me oc this!!!