Originally Posted by antesignani
i suppose youre right..im going to RMA my dimms just to be safe though.
Its completely normal to have to run 2.35v with some 4x1GB kits of ram. So you are wasting your time by RMAing them.
Make sure you have a fan on the ram through.
I run 2.2v on my 4GB on my ram, but anything above 1066 requires 2.3, and I'd assume 1200 would require more.
4GB DDR2 1200Mhz is a bit much for any board. I recommend either setting it to 1066 or even lower when running 4GB. Boards are having a tough time with 4GB. Even after RMA you will experience the same thing.