Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte GA-P35-DS3L Thread
New Posts  All Forums:Forum Nav:

Gigabyte GA-P35-DS3L Thread - Page 182

post #1811 of 4644
Johonm333

E2140@3560mhz, 445FSB, 1.48volts
Boiled In Water
(13 items)
 
  
CPUMotherboardGraphicsRAM
AthII x4 630 @ 3.6/2.7ghz 1.4v Gigabyte 890GPA-UD3H rev1.0 Gigabyte GTX 550 ti 1gb 1000/2000/2400 G.Skill DDR3 1600mhz 2x2gb 1.5v 
Hard DriveOptical DriveOSMonitor
2x1TB RAID0 WDFALS+Seagate LG DVD+RW Lightscribe Windows 7 Ultimate x64 21.5" Asus 5ms 1080p 
PowerCase
Corsair CMPSU-850TX Antec 300 
  hide details  
Reply
Boiled In Water
(13 items)
 
  
CPUMotherboardGraphicsRAM
AthII x4 630 @ 3.6/2.7ghz 1.4v Gigabyte 890GPA-UD3H rev1.0 Gigabyte GTX 550 ti 1gb 1000/2000/2400 G.Skill DDR3 1600mhz 2x2gb 1.5v 
Hard DriveOptical DriveOSMonitor
2x1TB RAID0 WDFALS+Seagate LG DVD+RW Lightscribe Windows 7 Ultimate x64 21.5" Asus 5ms 1080p 
PowerCase
Corsair CMPSU-850TX Antec 300 
  hide details  
Reply
post #1812 of 4644
Quote:
Originally Posted by homestyle View Post
It probably is not making good contact with the chip.
Trust me its making contact.

On Full Load its Not Hot hot but i can keep my hand on it without it burning,warmish is the best word.

Ive got a Nvidia Chipset behind me and i tell u know those are the ones that get hot.

The P35 Chipset (Northbridge) only uses 16watts. (Thermal Design Power)

The X38 chip runs quite a bit hotter and it uses 26.5 watts
post #1813 of 4644
Can someone help me with a E4600 and Corsair TWIN2X2048-6400C4
give me some settings for around 3ghz .....stock cooling right now
Derek's System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athon II x4 620 ASUS M4A88TD-V EVO/USB3 Zotac 9600GSO CORSAIR XMS3 8GB CMX8GX3M2A1333C9 
Hard DriveOptical DriveOSMonitor
2X 1TB and 160gb Main Drive Pioneer DVD/RW DL DVR-112D ATA Windows 7 Ult 64 2 x ASUS MS236H 1080P 
PowerCase
OCZ StealthXStream OCZ600SXS 600W COOLER MASTER ELITE 335 
  hide details  
Reply
Derek's System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athon II x4 620 ASUS M4A88TD-V EVO/USB3 Zotac 9600GSO CORSAIR XMS3 8GB CMX8GX3M2A1333C9 
Hard DriveOptical DriveOSMonitor
2X 1TB and 160gb Main Drive Pioneer DVD/RW DL DVR-112D ATA Windows 7 Ult 64 2 x ASUS MS236H 1080P 
PowerCase
OCZ StealthXStream OCZ600SXS 600W COOLER MASTER ELITE 335 
  hide details  
Reply
post #1814 of 4644
Quote:
Originally Posted by Dblake View Post
Can someone help me with a E4600 and Corsair TWIN2X2048-6400C4
give me some settings for around 3ghz .....stock cooling right now
Your chip has a 12x multiplier, and stock speed of 200 FSB. So, for 3 GHz, you need a 250 FSB (12 x 250 MHz = 3 GHz). You'll have to watch your vcore and raise it if your OC shows instability - but keep an eye on your temps as well.

However, have you read any overclocking guides or read through all or most of this thread? If not, I suggest you do that first. Get the various software programs to test your stability/monitor your OC. Go slowly, raising your FSB a bit at a time: don't jump right to 3 GHz.
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6750 @ 3.6 GHz 1.46875 vcore Gigabyte P35 DS3L Rev. 2 EVGA 8800 GT Mushkin HP PC6400 DDR2 @ 900MHz 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA2; Seagate 160 GB SATA Pioneer DVR-212D Windows XP SP2 Samsung SyncMaster 940B 
PowerCase
PC P&C Silencer 750W Antec Nine Hundred 
  hide details  
Reply
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6750 @ 3.6 GHz 1.46875 vcore Gigabyte P35 DS3L Rev. 2 EVGA 8800 GT Mushkin HP PC6400 DDR2 @ 900MHz 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA2; Seagate 160 GB SATA Pioneer DVR-212D Windows XP SP2 Samsung SyncMaster 940B 
PowerCase
PC P&C Silencer 750W Antec Nine Hundred 
  hide details  
Reply
post #1815 of 4644
yeah i have little experience. i have read a good amount of info on it and use cpuz for monitoring. i have a IR heat gun for second temp reading besides bios.
i think 3ghz is not to hard on the e4600. but whats max vcore i would want to go to?
thanks
Derek's System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athon II x4 620 ASUS M4A88TD-V EVO/USB3 Zotac 9600GSO CORSAIR XMS3 8GB CMX8GX3M2A1333C9 
Hard DriveOptical DriveOSMonitor
2X 1TB and 160gb Main Drive Pioneer DVD/RW DL DVR-112D ATA Windows 7 Ult 64 2 x ASUS MS236H 1080P 
PowerCase
OCZ StealthXStream OCZ600SXS 600W COOLER MASTER ELITE 335 
  hide details  
Reply
Derek's System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athon II x4 620 ASUS M4A88TD-V EVO/USB3 Zotac 9600GSO CORSAIR XMS3 8GB CMX8GX3M2A1333C9 
Hard DriveOptical DriveOSMonitor
2X 1TB and 160gb Main Drive Pioneer DVD/RW DL DVR-112D ATA Windows 7 Ult 64 2 x ASUS MS236H 1080P 
PowerCase
OCZ StealthXStream OCZ600SXS 600W COOLER MASTER ELITE 335 
  hide details  
Reply
post #1816 of 4644
Well, it's rated for 1.162V-1.312V, so I wouldn't go above that.
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6750 @ 3.6 GHz 1.46875 vcore Gigabyte P35 DS3L Rev. 2 EVGA 8800 GT Mushkin HP PC6400 DDR2 @ 900MHz 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA2; Seagate 160 GB SATA Pioneer DVR-212D Windows XP SP2 Samsung SyncMaster 940B 
PowerCase
PC P&C Silencer 750W Antec Nine Hundred 
  hide details  
Reply
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6750 @ 3.6 GHz 1.46875 vcore Gigabyte P35 DS3L Rev. 2 EVGA 8800 GT Mushkin HP PC6400 DDR2 @ 900MHz 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA2; Seagate 160 GB SATA Pioneer DVR-212D Windows XP SP2 Samsung SyncMaster 940B 
PowerCase
PC P&C Silencer 750W Antec Nine Hundred 
  hide details  
Reply
post #1817 of 4644
should i do anything with ram? or the bfg 8600gt 256mb?
Derek's System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athon II x4 620 ASUS M4A88TD-V EVO/USB3 Zotac 9600GSO CORSAIR XMS3 8GB CMX8GX3M2A1333C9 
Hard DriveOptical DriveOSMonitor
2X 1TB and 160gb Main Drive Pioneer DVD/RW DL DVR-112D ATA Windows 7 Ult 64 2 x ASUS MS236H 1080P 
PowerCase
OCZ StealthXStream OCZ600SXS 600W COOLER MASTER ELITE 335 
  hide details  
Reply
Derek's System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athon II x4 620 ASUS M4A88TD-V EVO/USB3 Zotac 9600GSO CORSAIR XMS3 8GB CMX8GX3M2A1333C9 
Hard DriveOptical DriveOSMonitor
2X 1TB and 160gb Main Drive Pioneer DVD/RW DL DVR-112D ATA Windows 7 Ult 64 2 x ASUS MS236H 1080P 
PowerCase
OCZ StealthXStream OCZ600SXS 600W COOLER MASTER ELITE 335 
  hide details  
Reply
post #1818 of 4644
Quote:
Originally Posted by Dblake View Post
should i do anything with ram? or the bfg 8600gt 256mb?
At only a 250 FSB, your RAM's only going to be running at 500 MHz at a 1:1 ratio, so you may want to set a higher multiplier on that to get it closer to its rated speed (you can leave it on Auto, but I think setting it manually is probably a better option). As for the graphics card, you don't need to do anything, but overclocking it is always an option, I guess, but I've not overclocked video cards before, so I can't advise you on that.
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6750 @ 3.6 GHz 1.46875 vcore Gigabyte P35 DS3L Rev. 2 EVGA 8800 GT Mushkin HP PC6400 DDR2 @ 900MHz 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA2; Seagate 160 GB SATA Pioneer DVR-212D Windows XP SP2 Samsung SyncMaster 940B 
PowerCase
PC P&C Silencer 750W Antec Nine Hundred 
  hide details  
Reply
My Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6750 @ 3.6 GHz 1.46875 vcore Gigabyte P35 DS3L Rev. 2 EVGA 8800 GT Mushkin HP PC6400 DDR2 @ 900MHz 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA2; Seagate 160 GB SATA Pioneer DVR-212D Windows XP SP2 Samsung SyncMaster 940B 
PowerCase
PC P&C Silencer 750W Antec Nine Hundred 
  hide details  
Reply
post #1819 of 4644
Hi everyone,

Ive just got this board set up with a Q6600 go stepping processor and 2GB (2x1GB) G.Skill 6400 HK series (4-4-3-5) RAMbut im having a few problems overclocking.
Im new to overclocking but i know a little bit. Im using the F6 BIOS with all default settings apart from the ram voltage which i set to 2.1V, and i disabled CPU EIST Function. Ive raied the FSB so my ram is now running at 940MHz and CPU is at 2.8GHz per core i also manually set the ram timmings to 4-4-3-5 as they were set by the bios to 5-5-5-15, the problem is that if i try to go any higher on the FSB windows will not boot or it just freezes up so i wanted to know if i need to raise the voltage on the FSB and/or the (G)MCH voltage, i tried rasing the cpu voltage by 0.1 to 1.4 but it still would not boot. I know this board and cpu are capable of going much hight than 2.8GHz per core as ive seen peoples on the internet at 3.6GHz, also everest ultimate edition says my DRAM:FSB ratio is 12:8 should that not be 1:1 and if so how would i go about changing it ? I would like to get this processor to 3GHz and i would like a bit more out of the RAM as ive heard that it is superb at overclocking, if anyone can give me some tips on timmings voltages ect to improve my system performance and help me get better overclock speeds it would be real appreciated.

Thanks

Gaming Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6600 G0 @ 3.5GHz Gigabyte GA-P35-DS3L EVGA GTX 260 Core 216 Superclocked Edition 4GB G.Skill DDR2 PC2-6400 HK 4-4-3-5 @ 940MHz 
Hard DriveOSMonitorKeyboard
WD6401AALS 640GB Black + Samsung F3 1TB Windows 7 Ultimate 64Bit Samsung SM2253BW 22" 1680x1050 Microsoft Digital Media 3000 
PowerCaseMouse
Corsair AX750 CoolerMaster 690 NVIDIA Edition Microsoft Laser Mouse 6000 
  hide details  
Reply
Gaming Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6600 G0 @ 3.5GHz Gigabyte GA-P35-DS3L EVGA GTX 260 Core 216 Superclocked Edition 4GB G.Skill DDR2 PC2-6400 HK 4-4-3-5 @ 940MHz 
Hard DriveOSMonitorKeyboard
WD6401AALS 640GB Black + Samsung F3 1TB Windows 7 Ultimate 64Bit Samsung SM2253BW 22" 1680x1050 Microsoft Digital Media 3000 
PowerCaseMouse
Corsair AX750 CoolerMaster 690 NVIDIA Edition Microsoft Laser Mouse 6000 
  hide details  
Reply
post #1820 of 4644
Quote:
Originally Posted by wiggy2k7 View Post
Hi everyone,

Ive just got this board set up with a Q6600 go stepping processor and 2GB (2x1GB) G.Skill 6400 HK series (4-4-3-5) RAMbut im having a few problems overclocking.
Im new to overclocking but i know a little bit. Im using the F6 BIOS with all default settings apart from the ram voltage which i set to 2.1V, and i disabled CPU EIST Function. Ive raied the FSB so my ram is now running at 940MHz and CPU is at 2.8GHz per core i also manually set the ram timmings to 4-4-3-5 as they were set by the bios to 5-5-5-15, the problem is that if i try to go any higher on the FSB windows will not boot or it just freezes up so i wanted to know if i need to raise the voltage on the FSB and/or the (G)MCH voltage, i tried rasing the cpu voltage by 0.1 to 1.4 but it still would not boot. I know this board and cpu are capable of going much hight than 2.8GHz per core as ive seen peoples on the internet at 3.6GHz, also everest ultimate edition says my DRAM:FSB ratio is 12:8 should that not be 1:1 and if so how would i go about changing it ? I would like to get this processor to 3GHz and i would like a bit more out of the RAM as ive heard that it is superb at overclocking, if anyone can give me some tips on timmings voltages ect to improve my system performance and help me get better overclock speeds it would be real appreciated.

Thanks

Could you please post a Core Temp picture? It'd help if we at least knew the VID of your CPU.

For instance, the only thing I did to get it to 3.0 GHz was to set "CPU Host Frequency (MHz)" to 333. All voltages are set to "Normal", except for the "DDR2 OverVoltage Control", pretty much like you did. Remember to also set "PCI Express Frequency (MHz)" to 100, just to be safe. Oh, and of course disable both Thermal Monitor and EIST. I left C1E enabled, since that didn't affect my performance or stability, and it reduces heat and load on my CPU when it is idle.

Good luck!
Current
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q6600 Gigabyte GA-P35-DS3L (rev. 2.0) eVGA GeForce 8800GT 512 MB G.Skill PC2-6400 2GBPK 
Hard DriveOSMonitorKeyboard
2x1 Hitachi Deskstar P7K500 500 GB Windows 7 Ultimate x86 LG L1753T 17" Microsoft Natural Ergonomic 4000 
PowerCaseMouse
Seasonic M12 600W Thermaltake Tsunami VA3000BWA Logitech G5 (edition 2007) 
  hide details  
Reply
Current
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q6600 Gigabyte GA-P35-DS3L (rev. 2.0) eVGA GeForce 8800GT 512 MB G.Skill PC2-6400 2GBPK 
Hard DriveOSMonitorKeyboard
2x1 Hitachi Deskstar P7K500 500 GB Windows 7 Ultimate x86 LG L1753T 17" Microsoft Natural Ergonomic 4000 
PowerCaseMouse
Seasonic M12 600W Thermaltake Tsunami VA3000BWA Logitech G5 (edition 2007) 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte GA-P35-DS3L Thread