Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte GA-P35-DS3L Thread
New Posts  All Forums:Forum Nav:

Gigabyte GA-P35-DS3L Thread - Page 323

post #3221 of 4644
Quote:
Originally Posted by Guide_Timothy View Post
I know SGT Spike posted alot at the begining , he is great and full of suggestions however i havnt seen him post anything recently but i'm sure others can help you out here
Tim,


Thanks! will be getting a new mobo to oc my 6300 I do hope someone is willing to help. Might need all the help I can get
post #3222 of 4644
Guys,

I am thinking of getting Gigabyte GA-P35-DS3L in 2 weeks to OC my e6300. I would just like to ask the experts out there if my system can handle OCing the e6300, I got kingston DDR2 800 (Im worried that my RAM wont be OCable)


I would just like to post my system details from dxdiag.

------------------
System Information
------------------
Time of this report: 8/13/2008, 14:31:10
Machine name: MUNZ
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp.060411-1541)
Language: English (Regional Setting: English)
System Manufacturer: INTEL_
System Model: DQ965GF_
BIOS: Default System BIOS
Processor: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz (2 CPUs)
Memory: 3062MB RAM
Page File: 868MB used, 4078MB available
Windows Dir: C:\\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode

------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: ATI Radeon HD 4800 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor (0x9440)
DAC type: Internal DAC(400MHz)
Device Key: Enum\\PCI\\VEN_1002&DEV_9440&SUBSYS_05021002&REV_0 0
Display Memory: 512.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6833 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 7/4/2008 11:23:45, 309248 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 7/4/2008 14:33:33, 3230720 bytes
Device Identifier: {D7B71EE2-D700-11CF-0369-0825A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x9440
SubSys ID: 0x05021002
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
post #3223 of 4644
You should have no problem in overclocking your e6300 cpu w/the Gigabyte p35-ds3l motherboard. I have the e6400 cpu overclocked to 3.20ghz with the Gigabyte p35-ds3r motherboard which is just the raid version of the ds3 series. You may want to invest in a aftermarket heatsink fan to overclock. It would be helpful if you posted your computer system specs. Which Kingston ddr800 ram do you have?
Q9550 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Yorkfield Q9550 E0 @ 3.66ghz Gigabyte EP45-UD3P rev.1.0 Gigabyte ATI HD 4350 4gb (2x2gb) Mushkin DDR2-1066 
Hard DriveOptical DriveOSMonitor
WD 36gb Raptor, Seagate 320gb & 500gb Sata HD's Pioneer 216, Benq 1640, LG H62L XP Pro SP3 Samsung 23 inch lcd tv 
PowerCase
Corsair 650HW CM 590 
  hide details  
Reply
Q9550 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Yorkfield Q9550 E0 @ 3.66ghz Gigabyte EP45-UD3P rev.1.0 Gigabyte ATI HD 4350 4gb (2x2gb) Mushkin DDR2-1066 
Hard DriveOptical DriveOSMonitor
WD 36gb Raptor, Seagate 320gb & 500gb Sata HD's Pioneer 216, Benq 1640, LG H62L XP Pro SP3 Samsung 23 inch lcd tv 
PowerCase
Corsair 650HW CM 590 
  hide details  
Reply
post #3224 of 4644
Quote:
Originally Posted by hawaiian_geek View Post
You should have no problem in overclocking your e6300 cpu w/the Gigabyte p35-ds3l motherboard. I have the e6400 cpu overclocked to 3.20ghz with the Gigabyte p35-ds3r motherboard which is just the raid version of the ds3 series. You may want to invest in a aftermarket heatsink fan to overclock. It would be helpful if you posted your computer system specs. Which Kingston ddr800 ram do you have?
Nice to hear!

KVR800D2N6/2G

here is a link to the specs, I dont understand much of it though
http://www.valueram.com/datasheets/KVR800D2N6_2G.pdf


here are the specs of my Kingston.

Also, would it be possible to increase FSB w/o having to tweak the RAM? (i'm kinda new at this so forgive me if im wrong) When running 1:1 FSB:RAM ratio (400Hz) do I still have to increase voltage / tweak the "6-6-6-18" thing of the RAM? I dont think increasing voltage is possble for my ram. It says max Voltage is 1.8V which I think is the default one.

Another thing is can I OC having the Vcore set at default? I seem to have read somewhere that they were able to OC at stock voltage.


System Specs:
e6300 on DQ965GF
ATI HD4870
3GB Ram (1G DDR2 533 which i will remove once I change MOBO)(2GB DDR2800)


I just want to make sure I can OC given all i have now before I go buy the MOBO.


Thanks!
post #3225 of 4644
It's not only the mobo tweaking that will get you to overclock a cpu but the ram as well. I've read it was not best to use Value Ram if one is overclocking a cpu. It may be best to buy better ram than what you have. You could just try using it to see how far you can overclock your e6300. I use Crucial Ballistic ddr2-800 in one system and Corsair XMS ddr2-800 in another.

I'm sure other members will post their thoughts on your questions. I just got into overclocking a few months ago. I've learned a lot from this forum site from other members. You'll probably have to up the vcore if your overclock is not stable. I can't remember at the moment if my e6400 system has the vcore at stock or not. I'm fixing a friends computer right now so I can't check it.

I say order the mobo because you won't know until you install your components whether or not it will overclock to higher speeds. It may be best to order better ram preferably one that is 2.1 or 2.2 volts. Just my 2 cents!

Edit: Okay my e6400 system has vcore set at normal setting/default.
Edited by hawaiian_geek - 8/17/08 at 1:00am
Q9550 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Yorkfield Q9550 E0 @ 3.66ghz Gigabyte EP45-UD3P rev.1.0 Gigabyte ATI HD 4350 4gb (2x2gb) Mushkin DDR2-1066 
Hard DriveOptical DriveOSMonitor
WD 36gb Raptor, Seagate 320gb & 500gb Sata HD's Pioneer 216, Benq 1640, LG H62L XP Pro SP3 Samsung 23 inch lcd tv 
PowerCase
Corsair 650HW CM 590 
  hide details  
Reply
Q9550 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Yorkfield Q9550 E0 @ 3.66ghz Gigabyte EP45-UD3P rev.1.0 Gigabyte ATI HD 4350 4gb (2x2gb) Mushkin DDR2-1066 
Hard DriveOptical DriveOSMonitor
WD 36gb Raptor, Seagate 320gb & 500gb Sata HD's Pioneer 216, Benq 1640, LG H62L XP Pro SP3 Samsung 23 inch lcd tv 
PowerCase
Corsair 650HW CM 590 
  hide details  
Reply
post #3226 of 4644
Quote:
Originally Posted by hawaiian_geek View Post
It's not only the mobo tweaking that will get you to overclock a cpu but the ram as well. I've read it was not best to use Value Ram if one is overclocking a cpu. It may be best to buy better ram than what you have. You could just try using it to see how far you can overclock your e6300. I use Crucial Ballistic ddr2-800 in one system and Corsair XMS ddr2-800 in another.

I'm sure other members will post their thoughts on your questions. I just got into overclocking a few months ago. I've learned a lot from this forum site from other members. You'll probably have to up the vcore if your overclock is not stable. I can't remember at the moment if my e6400 system has the vcore at stock or not. I'm fixing a friends computer right now so I can't check it.

I say order the mobo because you won't know until you install your components whether or not it will overclock to higher speeds. It may be best to order better ram preferably one that is 2.1 or 2.2 volts. Just my 2 cents!

Edit: Okay my e6400 system has vcore set at normal setting/default.
Hawaiian,


Thanks for the advice. I might get the mobo, I'm just worried that I buy it and not be able to OC it right away (wait until I can buy a better ram) I'm kind of in a credit crunch right now. Can anyone tell me how one Ocs the ram? I once tried to change the (6-6-6-18) setting to (4-4-4-12) all else unchanged and the computer just beeps and does not boot ( as if the ram is not inserted correctly) so I reset the mobo and set it back to default. I just dont want to spend 5000php+ and not get what i want. (Is it safe to say that RAM is the only thing holding me back at the moment)?
post #3227 of 4644
I got mine at 3.0 right now w/the stock volts for folding..
    
CPUMotherboardGraphicsRAM
i5 2500k 4.5 @1.374 Asock P67 Extreme4 gen3 Galaxy GTX560Ti 448 cores G.Skill Ripjaws 2X4 2133 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 256gb Samsung F3 1tb Asus DVD/CD RW sata Mega Shadow 
OSMonitorKeyboardPower
Win 7 Ult. X64 LG W2361V CM Quickfire pro browns. Corsair HX 850 
CaseMouseMouse PadAudio
CM Storm Trooper.. G500 Allsop Diamond pad Creative X-FI Fatality 
Audio
Klipsch Pro Media  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5 2500k 4.5 @1.374 Asock P67 Extreme4 gen3 Galaxy GTX560Ti 448 cores G.Skill Ripjaws 2X4 2133 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 256gb Samsung F3 1tb Asus DVD/CD RW sata Mega Shadow 
OSMonitorKeyboardPower
Win 7 Ult. X64 LG W2361V CM Quickfire pro browns. Corsair HX 850 
CaseMouseMouse PadAudio
CM Storm Trooper.. G500 Allsop Diamond pad Creative X-FI Fatality 
Audio
Klipsch Pro Media  
  hide details  
Reply
post #3228 of 4644
Quote:
Originally Posted by CudaBoy71 View Post
I got mine at 3.0 right now w/the stock volts for folding..
e6300? really!? cool!! hope you can help me when I get my new MOBO. hehehe
post #3229 of 4644
guys im sorry to keep on posting and posting about every little thing i find on the net but am I understanding this right?

" will start with some general recommendations/knowledge, and finish up with the how-to.

Okay, so you’re in BIOS, you’ve made a few minor tweaks, as recommended. Now get to the menu that contains CPU freq., CPU voltage, Spread Spectrum, AGP voltage, etc etc. Your stock bus speed is already set. If it is grayed out, find the option to change from ‘auto’ to ‘manual’ that will give you access to such things as CPU freq., CPU voltage, etc. RAM speed may be listed in a different menu (normally Advanced Chipset
Features), so first things first, make sure it is set accordingly. If you have RAM that is rated to run on a faster bus than your CPU (i.e. a 533 mhz FSB CPU in conjunction with DDR400 RAM), awesome, you have headroom. You still want to set it to 1:1 operation, as this will offer the best performance. The exception, of course, is if your CPU is rated to run on a faster bus then your RAM. If this is the case, then set RAM speed accordingly.""


This is taken from a guide and I think a reliable one. So given my circumstances, e6300 (fsb of 1066) (1066/4=266.5) , ram is 2GB DDR2 800 (400Mhz) Can i just set the ratio to 1:1 and use stock voltage to get 2.6Ghz (note: This a value RAM) (NO TWEAKING OF RAM)

I'll be happy with 2.6Ghz for now until I can get better RAM
post #3230 of 4644
Guys,

Okay I've just realized that Im not going for the MOBO just yet. I'm thinking q6600 then maybe later, as im studying OC'ing ill be saving up for a new mobo then practice it on (my soon to be old e6300) LOL. I cant risk buying a new mobo to fry everything up. Any last ideas? This would surely not bottleneck my 4870 right? I mean even in games not yet optimized for quads? Coz i have no other processor option (hopefully i see Q6700 somewhere here). What are your thoughts also on the life span of q6600 in terms of gaming? I actually want the system to be ready for warhammer online comming this sept, Soon starcraft2, diablo3 and FALLOUT3 woot woot!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte GA-P35-DS3L Thread