Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte GA-P35-DS3L Thread
New Posts  All Forums:Forum Nav:

Gigabyte GA-P35-DS3L Thread - Page 333

post #3321 of 4644
Quote:
Originally Posted by Skydawg View Post
Has anyone found a solution to having to unplug external usb devices to get the board to boot?

Thanks,
John
Mine will boot fine with a usb device. I've even booted off of usb devices.

Quote:
Originally Posted by jaz View Post
Is there a way to tell what bios i have? My board is still sitting on the bench, waiting to be installed. I don't want to install the board only to find it won't play nice with the e8400 like i read some people have had to use older intel cpu's to get system up and running to get bios update for e8400.

No input about mosfets cooling? Nobody is having problems with these overheating like i read on so many other mobo's?
CPU-Z will tell you the bios revision.
WC ftw!
(13 items)
 
  
CPUMotherboardGraphicsRAM
C2D E7200 @ 3.51ghz 1.17v Lapped Gigabyte EP35-DS3L, HR-05 on nb Palit 8800gt 8gb G.Skill @ 1000mhz 2.1v 
Hard DriveOptical DriveOSMonitor
2x7200.12 500gb RAID, 2xWD5000AAKS Asus DRW-1814BLT SATA CLFSx64, W7x64 SCEPTRE 22" 1680x1050 
KeyboardPowerCaseMouse
Logitech Media Corsair HX520 Modular Antec P182 Gunmetal Logitech G7 Laser Cordless 
Mouse Pad
none 
  hide details  
Reply
WC ftw!
(13 items)
 
  
CPUMotherboardGraphicsRAM
C2D E7200 @ 3.51ghz 1.17v Lapped Gigabyte EP35-DS3L, HR-05 on nb Palit 8800gt 8gb G.Skill @ 1000mhz 2.1v 
Hard DriveOptical DriveOSMonitor
2x7200.12 500gb RAID, 2xWD5000AAKS Asus DRW-1814BLT SATA CLFSx64, W7x64 SCEPTRE 22" 1680x1050 
KeyboardPowerCaseMouse
Logitech Media Corsair HX520 Modular Antec P182 Gunmetal Logitech G7 Laser Cordless 
Mouse Pad
none 
  hide details  
Reply
post #3322 of 4644
if you got a rev 2.0 board you wont need to touch the bios to get a 45nm chip running
The old tower
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 Q811A @ 4.005Ghz and now a Q6600 @ 3.6 GA-P35-DS3L MSI 8800GT 750/1875/1017 4gb Corsair Dominator 
OSPowerCase
Vista Ult. 64 VX550 CM690 (Rocketfish Soon) 
  hide details  
Reply
The old tower
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 Q811A @ 4.005Ghz and now a Q6600 @ 3.6 GA-P35-DS3L MSI 8800GT 750/1875/1017 4gb Corsair Dominator 
OSPowerCase
Vista Ult. 64 VX550 CM690 (Rocketfish Soon) 
  hide details  
Reply
post #3323 of 4644
My board is a revision 1.0. I read most of the reviews on newegg about the boards good and bad points. I too, had to hammer the cpu holder to get it straight, cuz it was bent, and was putting way to much pressure on the chip.

Some people say their boards ran just fine with the bios that came with it, others said they had to flash bios with an older intel chip to get the board to reckognize the cpu. My hs bracket is the last thing I'm waiting for and it's due today. So i have to write down all my programs si i can remember what to re-install, save my saved games from far cry, blah blah blah...God, i hope everything works ok...lol.

Still nobody has issues with mosfet cooling? I found some really nice small copper mosfet hs's and one person said they decreased the temps by about 5c. I don't know if that's worth putting something on there as i have 4 120mm fans on side panel blowing in motherboard. Plus the top and rear exaust fans pull air directly over them, so i would think that would help.
thanks for the replies.
Edited by jaz - 9/25/08 at 10:22am
my addiction
(16 items)
 
  
CPUMotherboardGraphicsRAM
2500k@4.5ghz (1.250vcore) idle 28c/load 56c Asus p8p67 pro Rev 3.1 Bios 1850 evga gtx gigabyte 670 2X4gb crucial xms3 1333 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 640GB Sammy sh-s223q/lite-on sohw-1693s noctua d-14 Win 7 Pro 64bit 
MonitorKeyboardPowerCase
Sammy T240 Belkin split ergonomic (black) OCZ 800w eliteXstream Cm Stacker 830 evo (black) 
MouseMouse PadAudioOther
Razor red Diamondback and razor blue plasma razor goliathius mat logtech z5300 and akg k141 monitor cans creative musicxtreme 
  hide details  
Reply
my addiction
(16 items)
 
  
CPUMotherboardGraphicsRAM
2500k@4.5ghz (1.250vcore) idle 28c/load 56c Asus p8p67 pro Rev 3.1 Bios 1850 evga gtx gigabyte 670 2X4gb crucial xms3 1333 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 640GB Sammy sh-s223q/lite-on sohw-1693s noctua d-14 Win 7 Pro 64bit 
MonitorKeyboardPowerCase
Sammy T240 Belkin split ergonomic (black) OCZ 800w eliteXstream Cm Stacker 830 evo (black) 
MouseMouse PadAudioOther
Razor red Diamondback and razor blue plasma razor goliathius mat logtech z5300 and akg k141 monitor cans creative musicxtreme 
  hide details  
Reply
post #3324 of 4644
my mofsets are fine right now because of the airflow in the cm690, but when i transfer over to my rocketfish i definitely will stick some ramsinks on the mofsets because of the lack of airflow in a wc'd case.
The old tower
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 Q811A @ 4.005Ghz and now a Q6600 @ 3.6 GA-P35-DS3L MSI 8800GT 750/1875/1017 4gb Corsair Dominator 
OSPowerCase
Vista Ult. 64 VX550 CM690 (Rocketfish Soon) 
  hide details  
Reply
The old tower
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 Q811A @ 4.005Ghz and now a Q6600 @ 3.6 GA-P35-DS3L MSI 8800GT 750/1875/1017 4gb Corsair Dominator 
OSPowerCase
Vista Ult. 64 VX550 CM690 (Rocketfish Soon) 
  hide details  
Reply
post #3325 of 4644
Csquared, did you have to straighten out your cpu bracket like i and a few others from newegg reviews said? Some didn't say what revision mobo they had. Good to know the mosfets stay pretty cool even oc'ed as much as you are. I plan on oc'ing my new vcard also. Thanks for the info.
my addiction
(16 items)
 
  
CPUMotherboardGraphicsRAM
2500k@4.5ghz (1.250vcore) idle 28c/load 56c Asus p8p67 pro Rev 3.1 Bios 1850 evga gtx gigabyte 670 2X4gb crucial xms3 1333 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 640GB Sammy sh-s223q/lite-on sohw-1693s noctua d-14 Win 7 Pro 64bit 
MonitorKeyboardPowerCase
Sammy T240 Belkin split ergonomic (black) OCZ 800w eliteXstream Cm Stacker 830 evo (black) 
MouseMouse PadAudioOther
Razor red Diamondback and razor blue plasma razor goliathius mat logtech z5300 and akg k141 monitor cans creative musicxtreme 
  hide details  
Reply
my addiction
(16 items)
 
  
CPUMotherboardGraphicsRAM
2500k@4.5ghz (1.250vcore) idle 28c/load 56c Asus p8p67 pro Rev 3.1 Bios 1850 evga gtx gigabyte 670 2X4gb crucial xms3 1333 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 640GB Sammy sh-s223q/lite-on sohw-1693s noctua d-14 Win 7 Pro 64bit 
MonitorKeyboardPowerCase
Sammy T240 Belkin split ergonomic (black) OCZ 800w eliteXstream Cm Stacker 830 evo (black) 
MouseMouse PadAudioOther
Razor red Diamondback and razor blue plasma razor goliathius mat logtech z5300 and akg k141 monitor cans creative musicxtreme 
  hide details  
Reply
post #3326 of 4644
no i did not, mine came perfectly straight with my rev 2.0 board
The old tower
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 Q811A @ 4.005Ghz and now a Q6600 @ 3.6 GA-P35-DS3L MSI 8800GT 750/1875/1017 4gb Corsair Dominator 
OSPowerCase
Vista Ult. 64 VX550 CM690 (Rocketfish Soon) 
  hide details  
Reply
The old tower
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 Q811A @ 4.005Ghz and now a Q6600 @ 3.6 GA-P35-DS3L MSI 8800GT 750/1875/1017 4gb Corsair Dominator 
OSPowerCase
Vista Ult. 64 VX550 CM690 (Rocketfish Soon) 
  hide details  
Reply
post #3327 of 4644
Csquared, here is where i saw the mosfets hs's. Lotsa other goodies for cheap too. thanks for your help.
my addiction
(16 items)
 
  
CPUMotherboardGraphicsRAM
2500k@4.5ghz (1.250vcore) idle 28c/load 56c Asus p8p67 pro Rev 3.1 Bios 1850 evga gtx gigabyte 670 2X4gb crucial xms3 1333 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 640GB Sammy sh-s223q/lite-on sohw-1693s noctua d-14 Win 7 Pro 64bit 
MonitorKeyboardPowerCase
Sammy T240 Belkin split ergonomic (black) OCZ 800w eliteXstream Cm Stacker 830 evo (black) 
MouseMouse PadAudioOther
Razor red Diamondback and razor blue plasma razor goliathius mat logtech z5300 and akg k141 monitor cans creative musicxtreme 
  hide details  
Reply
my addiction
(16 items)
 
  
CPUMotherboardGraphicsRAM
2500k@4.5ghz (1.250vcore) idle 28c/load 56c Asus p8p67 pro Rev 3.1 Bios 1850 evga gtx gigabyte 670 2X4gb crucial xms3 1333 
Hard DriveOptical DriveCoolingOS
WD Caviar Black 640GB Sammy sh-s223q/lite-on sohw-1693s noctua d-14 Win 7 Pro 64bit 
MonitorKeyboardPowerCase
Sammy T240 Belkin split ergonomic (black) OCZ 800w eliteXstream Cm Stacker 830 evo (black) 
MouseMouse PadAudioOther
Razor red Diamondback and razor blue plasma razor goliathius mat logtech z5300 and akg k141 monitor cans creative musicxtreme 
  hide details  
Reply
post #3328 of 4644
Got a good one here. Has anyone had problems with their cd-roms not being bootable? This is a recent thing for me as i went to change my linux distro and it wont boot from the cd at all. I tried a known good windows cd, my cd is the first boot device and the drive itself works fine(just watched a dvd on it last night). The only thing i can think of is some kind of bios issue. Im sure it could be the drive, but i have never had one fail that way before.
The Beast Deux
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-5820k 4.4Ghz GA-X99-Gaming 5 Zotac AMP! GTX-470 G.Skill DDR4-2133 4X4Gb 
Hard DriveOptical DriveCoolingOS
Samsung 950 Pro M.2 256Gb Sony Optiarc DVD-R+ Corsair H-100i Windows 10 Pro 
MonitorKeyboardPowerCase
View Sonic 22.5" LED Microsoft Wireless Desktop 2000 Antec True Power New 750 CoolerMaster HAF-932 
MouseAudio
Microsoft Wireless Desktop 2000 Creative Sound Core 3D 
  hide details  
Reply
The Beast Deux
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-5820k 4.4Ghz GA-X99-Gaming 5 Zotac AMP! GTX-470 G.Skill DDR4-2133 4X4Gb 
Hard DriveOptical DriveCoolingOS
Samsung 950 Pro M.2 256Gb Sony Optiarc DVD-R+ Corsair H-100i Windows 10 Pro 
MonitorKeyboardPowerCase
View Sonic 22.5" LED Microsoft Wireless Desktop 2000 Antec True Power New 750 CoolerMaster HAF-932 
MouseAudio
Microsoft Wireless Desktop 2000 Creative Sound Core 3D 
  hide details  
Reply
post #3329 of 4644
hi all. im having issues OCing my new E8400 E0. im glad i found this thread.

a few of my threads for reference:
http://www.overclock.net/intel-cpus/...0-e0-4ghz.html
and
http://www.overclock.net/intel-cpus/...-e8400-e0.html

i think im being limited by my memory, but im not sure. its gskill ddr2 800. i want to be stable at 445x9 or 500x8, whatever is best for 4ghz. i can get into windows no problem, but prime/orthos/occt fail after a few mins. i took it to 3.6ghz (400x9) right away without changing any voltages. (besides the usual) and it was 2 hours orthos stable. but anything up from there, i havent found the right settings to keep it stable.
Quad Virgin
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4158mhz/1.296v 462*9 GIGABYTE EP45-UD3R EVGA GTX 570 SC @ 797/975/1594 2x2gb Mushkin DDR2 1066 2.0v 5-5-5-15 
Hard DriveOSMonitorPower
Crucial M4 64 Vista Ultimate x64 ASUS MK241 24in 1920x1200 Corsair HX620 
Case
COOLER MASTER CM690 
  hide details  
Reply
Quad Virgin
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4158mhz/1.296v 462*9 GIGABYTE EP45-UD3R EVGA GTX 570 SC @ 797/975/1594 2x2gb Mushkin DDR2 1066 2.0v 5-5-5-15 
Hard DriveOSMonitorPower
Crucial M4 64 Vista Ultimate x64 ASUS MK241 24in 1920x1200 Corsair HX620 
Case
COOLER MASTER CM690 
  hide details  
Reply
post #3330 of 4644
does anyone know how to set the link width on the pci-e bus on these boards?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte GA-P35-DS3L Thread