Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte GA-P35-DS3L Thread
New Posts  All Forums:Forum Nav:

Gigabyte GA-P35-DS3L Thread - Page 404

post #4031 of 4644
Quote:
Originally Posted by Mikecdm View Post
When I had this mb and a Q6600, to run at 3.6ghz, I needed to max the FSB and MCH voltage. I believe it's +3 on both of those options. If i lowered the multi to 8x and tried 400fsb, I still needed the same settings.
Hmm I see, I'll try upping them +1 and run prime.
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.6ghz (1.368v load) Gigabyte P67A-UD5 (B3 rev.) MSI GTX 1080 Ti Gaming X 2x4GB GSkill F3-1700CL9D-8GBXM 
Hard DriveCoolingOSMonitor
1TB 850 Pro SSD, 1TB Samsung F3, 1TB WD10EZEX Noctua NH-D14 Win7 Ultimate 64-bit Dell P2414H @ 72hz 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750w G2 HAF 932 "Dust Collection" Edition Logitech G402 Goliathus Control, Hien Mid, Puretrak Talent 
Audio
Xonar Essence ST + DT990pro 250ohm 
  hide details  
Reply
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.6ghz (1.368v load) Gigabyte P67A-UD5 (B3 rev.) MSI GTX 1080 Ti Gaming X 2x4GB GSkill F3-1700CL9D-8GBXM 
Hard DriveCoolingOSMonitor
1TB 850 Pro SSD, 1TB Samsung F3, 1TB WD10EZEX Noctua NH-D14 Win7 Ultimate 64-bit Dell P2414H @ 72hz 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750w G2 HAF 932 "Dust Collection" Edition Logitech G402 Goliathus Control, Hien Mid, Puretrak Talent 
Audio
Xonar Essence ST + DT990pro 250ohm 
  hide details  
Reply
post #4032 of 4644
Easyc turn down the memory from "turbo" to "standard" that should make a difference.
Edited by cory1234 - 3/18/10 at 9:12am
post #4033 of 4644
Quote:
Originally Posted by cory1234 View Post
Easyc turn down the memory from "turbo" to "standard" that should make a difference.
Will do, must have missed reading about changing that. Not too sure what it does, but anyway. I ran Prime last night (small fft test) I hadn't changed turbo to standard but all the workers were still going when I stopped it at 9hrs 40 min, I guess upping the FSB and GMCH +1 helped

I'll run a blend test while I'm at work with turbo changed to standard.
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.6ghz (1.368v load) Gigabyte P67A-UD5 (B3 rev.) MSI GTX 1080 Ti Gaming X 2x4GB GSkill F3-1700CL9D-8GBXM 
Hard DriveCoolingOSMonitor
1TB 850 Pro SSD, 1TB Samsung F3, 1TB WD10EZEX Noctua NH-D14 Win7 Ultimate 64-bit Dell P2414H @ 72hz 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750w G2 HAF 932 "Dust Collection" Edition Logitech G402 Goliathus Control, Hien Mid, Puretrak Talent 
Audio
Xonar Essence ST + DT990pro 250ohm 
  hide details  
Reply
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.6ghz (1.368v load) Gigabyte P67A-UD5 (B3 rev.) MSI GTX 1080 Ti Gaming X 2x4GB GSkill F3-1700CL9D-8GBXM 
Hard DriveCoolingOSMonitor
1TB 850 Pro SSD, 1TB Samsung F3, 1TB WD10EZEX Noctua NH-D14 Win7 Ultimate 64-bit Dell P2414H @ 72hz 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750w G2 HAF 932 "Dust Collection" Edition Logitech G402 Goliathus Control, Hien Mid, Puretrak Talent 
Audio
Xonar Essence ST + DT990pro 250ohm 
  hide details  
Reply
post #4034 of 4644
Quote:
Originally Posted by EasyC View Post
Will do, must have missed reading about changing that. Not too sure what it does, but anyway. I ran Prime last night (small fft test) I hadn't changed turbo to standard but all the workers were still going when I stopped it at 9hrs 40 min, I guess upping the FSB and GMCH +1 helped

I'll run a blend test while I'm at work with turbo changed to standard.
Blend test ran fine for 7hrs. I guess now I'll try backing off my vcore a bit and get my FSB to 400.
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.6ghz (1.368v load) Gigabyte P67A-UD5 (B3 rev.) MSI GTX 1080 Ti Gaming X 2x4GB GSkill F3-1700CL9D-8GBXM 
Hard DriveCoolingOSMonitor
1TB 850 Pro SSD, 1TB Samsung F3, 1TB WD10EZEX Noctua NH-D14 Win7 Ultimate 64-bit Dell P2414H @ 72hz 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750w G2 HAF 932 "Dust Collection" Edition Logitech G402 Goliathus Control, Hien Mid, Puretrak Talent 
Audio
Xonar Essence ST + DT990pro 250ohm 
  hide details  
Reply
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.6ghz (1.368v load) Gigabyte P67A-UD5 (B3 rev.) MSI GTX 1080 Ti Gaming X 2x4GB GSkill F3-1700CL9D-8GBXM 
Hard DriveCoolingOSMonitor
1TB 850 Pro SSD, 1TB Samsung F3, 1TB WD10EZEX Noctua NH-D14 Win7 Ultimate 64-bit Dell P2414H @ 72hz 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750w G2 HAF 932 "Dust Collection" Edition Logitech G402 Goliathus Control, Hien Mid, Puretrak Talent 
Audio
Xonar Essence ST + DT990pro 250ohm 
  hide details  
Reply
post #4035 of 4644
Well I seem to be stable at 380 FSB, but at 390....its unstable again. Not sure if upping the vcore will help anymore, would giving the DDR2 OverVoltage +1 help? I was hoping having the GMCH and FSB +1 would have gotten me to 400 FSB, but it wasn't to be
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.6ghz (1.368v load) Gigabyte P67A-UD5 (B3 rev.) MSI GTX 1080 Ti Gaming X 2x4GB GSkill F3-1700CL9D-8GBXM 
Hard DriveCoolingOSMonitor
1TB 850 Pro SSD, 1TB Samsung F3, 1TB WD10EZEX Noctua NH-D14 Win7 Ultimate 64-bit Dell P2414H @ 72hz 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750w G2 HAF 932 "Dust Collection" Edition Logitech G402 Goliathus Control, Hien Mid, Puretrak Talent 
Audio
Xonar Essence ST + DT990pro 250ohm 
  hide details  
Reply
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.6ghz (1.368v load) Gigabyte P67A-UD5 (B3 rev.) MSI GTX 1080 Ti Gaming X 2x4GB GSkill F3-1700CL9D-8GBXM 
Hard DriveCoolingOSMonitor
1TB 850 Pro SSD, 1TB Samsung F3, 1TB WD10EZEX Noctua NH-D14 Win7 Ultimate 64-bit Dell P2414H @ 72hz 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750w G2 HAF 932 "Dust Collection" Edition Logitech G402 Goliathus Control, Hien Mid, Puretrak Talent 
Audio
Xonar Essence ST + DT990pro 250ohm 
  hide details  
Reply
post #4036 of 4644
Quote:
Originally Posted by EasyC View Post
Well I seem to be stable at 380 FSB, but at 390....its unstable again. Not sure if upping the vcore will help anymore, would giving the DDR2 OverVoltage +1 help? I was hoping having the GMCH and FSB +1 would have gotten me to 400 FSB, but it wasn't to be
Is your ram rated for 2.1v? If so you want to put +3 on your ram.
For 3.6ghz your probably going to need +3 on both the fsb, and gmch.
post #4037 of 4644
--
Edited by PapaSmurf - 3/22/10 at 8:09pm
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
post #4038 of 4644
Quote:
Originally Posted by EasyC View Post
Well I seem to be stable at 380 FSB, but at 390....its unstable again. Not sure if upping the vcore will help anymore, would giving the DDR2 OverVoltage +1 help? I was hoping having the GMCH and FSB +1 would have gotten me to 400 FSB, but it wasn't to be
There is a vdroop on the ram side of these mb's too. What i did was to set the mem volts, reboot and check the actual mem voltage in the bios hardware monitor. If it was low(and it was), i would just up it a bit more to get the desired volts. This was for the super talent ram that i use, corsair may be different. I had to add .6 to my ram to get it right, and it didnt hurt anything. Also you might want to add a bit more vcore and try to boot at a higher frequency. Sometimes the 'walls' are just in a certain fsb range. I tried the pencil mod and got nothing from it except a mb full of graphite dust. You might have to get really close to your max vcore to achieve a higher overclock.
Edited by jcharlesr75 - 3/20/10 at 12:05pm
The Beast Deux
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-5820k 4.4Ghz GA-X99-Gaming 5 Zotac AMP! GTX-470 G.Skill DDR4-2133 4X4Gb 
Hard DriveOptical DriveCoolingOS
Samsung 950 Pro M.2 256Gb Sony Optiarc DVD-R+ Corsair H-100i Windows 10 Pro 
MonitorKeyboardPowerCase
View Sonic 22.5" LED Microsoft Wireless Desktop 2000 Antec True Power New 750 CoolerMaster HAF-932 
MouseAudio
Microsoft Wireless Desktop 2000 Creative Sound Core 3D 
  hide details  
Reply
The Beast Deux
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-5820k 4.4Ghz GA-X99-Gaming 5 Zotac AMP! GTX-470 G.Skill DDR4-2133 4X4Gb 
Hard DriveOptical DriveCoolingOS
Samsung 950 Pro M.2 256Gb Sony Optiarc DVD-R+ Corsair H-100i Windows 10 Pro 
MonitorKeyboardPowerCase
View Sonic 22.5" LED Microsoft Wireless Desktop 2000 Antec True Power New 750 CoolerMaster HAF-932 
MouseAudio
Microsoft Wireless Desktop 2000 Creative Sound Core 3D 
  hide details  
Reply
post #4039 of 4644
Quote:
Originally Posted by cory1234 View Post
Is your ram rated for 2.1v? If so you want to put +3 on your ram.
For 3.6ghz your probably going to need +3 on both the fsb, and gmch.
Yep it's rated for 2.1v, but I'm only trying to get to 3.2ghz.

Quote:
Originally Posted by PapaSmurf View Post
If you have the C4 version of Corsair ram it REQUIRES 2.1vcore to run at 4-4-4 timings. If you haven't upped the vcore to +3 yet you are seriously undervolting that ram and it will NEVER run at it's rated timings at it's rated speed without it.
Yeah it's Cas 4, but my timings running at 5-5-5-18. I should have changed that in my sig, I haven't tried tightening them to their "tested latency (4-4-4-12)."

Quote:
Originally Posted by jcharlesr75 View Post
There is a vdroop on the ram side of these mb's too. What i did was to set the mem volts, reboot and check the actual mem voltage in the bios hardware monitor. If it was low(and it was), i would just up it a bit more to get the desired volts. This was for the super talent ram that i use, corsair may be different. I had to add .6 to my ram to get it right, and it didnt hurt anything. Also you might want to add a bit more vcore and try to boot at a higher frequency. Sometimes the 'walls' are just in a certain fsb range. I tried the pencil mod and got nothing from it except a mb full of graphite dust. You might have to get really close to your max vcore to achieve a higher overclock.
I could try a slightly higher vcore but it's starting to get towards the temp boundaries of the Q6600 (65c during prime).
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.6ghz (1.368v load) Gigabyte P67A-UD5 (B3 rev.) MSI GTX 1080 Ti Gaming X 2x4GB GSkill F3-1700CL9D-8GBXM 
Hard DriveCoolingOSMonitor
1TB 850 Pro SSD, 1TB Samsung F3, 1TB WD10EZEX Noctua NH-D14 Win7 Ultimate 64-bit Dell P2414H @ 72hz 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750w G2 HAF 932 "Dust Collection" Edition Logitech G402 Goliathus Control, Hien Mid, Puretrak Talent 
Audio
Xonar Essence ST + DT990pro 250ohm 
  hide details  
Reply
It's a computer
(15 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.6ghz (1.368v load) Gigabyte P67A-UD5 (B3 rev.) MSI GTX 1080 Ti Gaming X 2x4GB GSkill F3-1700CL9D-8GBXM 
Hard DriveCoolingOSMonitor
1TB 850 Pro SSD, 1TB Samsung F3, 1TB WD10EZEX Noctua NH-D14 Win7 Ultimate 64-bit Dell P2414H @ 72hz 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750w G2 HAF 932 "Dust Collection" Edition Logitech G402 Goliathus Control, Hien Mid, Puretrak Talent 
Audio
Xonar Essence ST + DT990pro 250ohm 
  hide details  
Reply
post #4040 of 4644
--
Edited by PapaSmurf - 3/22/10 at 8:09pm
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte GA-P35-DS3L Thread