Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte GA-P35-DS3L Thread
New Posts  All Forums:Forum Nav:

Gigabyte GA-P35-DS3L Thread - Page 407

post #4061 of 4644
Quote:
Originally Posted by Greensystemsgo View Post
My ram is holding me back now. OEM HP 667mhz is currently overclocked to 8xxmhz something. gotta admit its not bad for this ram.

Gonna buy some better ram before continuing as i had to pull the dual 533mhz ram just to oc to 2.4ghz. Hoping for 3.0 stable once i get a megahalem for my q6600 and stick its rosewill on the E6300.
Are you running a 2x Multiplier on your RAM? If not, you should be... At 2x you can get 333FSB which is 3GHZ without over clocking your RAM. Your looking for a 1:1 ratio with your ram. 333 will give you that and get you 3GHz.
Edited by Avacado - 4/10/10 at 9:43pm
Sky
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 *Lapped* @ 3.24GHz Gigabyte P35 DS3L Rev 2.0 EVGA GTX 465 G Skill 2x2GB PC2 8000 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA Sony W/ LightScribe DVD+RW XP LG 32" HDTV 
KeyboardPowerCaseMouse
Microsoft OCZ600SXS Antec 900 Microsoft Intelli Point 
Mouse Pad
Memory Foam Pad 
  hide details  
Reply
Sky
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 *Lapped* @ 3.24GHz Gigabyte P35 DS3L Rev 2.0 EVGA GTX 465 G Skill 2x2GB PC2 8000 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA Sony W/ LightScribe DVD+RW XP LG 32" HDTV 
KeyboardPowerCaseMouse
Microsoft OCZ600SXS Antec 900 Microsoft Intelli Point 
Mouse Pad
Memory Foam Pad 
  hide details  
Reply
post #4062 of 4644
Quote:
Originally Posted by dragonisko View Post
1066, set 400 fsb, saved and named it, at the moment no reset, but cant get it stable
SPD - 2.0
vcore - 1.2685
ram - +0.2
fsb - +0.1
(G)MCH - +0.1

Your RAM can handle a lot more, try upping your FSB and dropping your multiplier. and 0.3 on your RAM = 2.1V
Sky
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 *Lapped* @ 3.24GHz Gigabyte P35 DS3L Rev 2.0 EVGA GTX 465 G Skill 2x2GB PC2 8000 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA Sony W/ LightScribe DVD+RW XP LG 32" HDTV 
KeyboardPowerCaseMouse
Microsoft OCZ600SXS Antec 900 Microsoft Intelli Point 
Mouse Pad
Memory Foam Pad 
  hide details  
Reply
Sky
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 *Lapped* @ 3.24GHz Gigabyte P35 DS3L Rev 2.0 EVGA GTX 465 G Skill 2x2GB PC2 8000 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA Sony W/ LightScribe DVD+RW XP LG 32" HDTV 
KeyboardPowerCaseMouse
Microsoft OCZ600SXS Antec 900 Microsoft Intelli Point 
Mouse Pad
Memory Foam Pad 
  hide details  
Reply
post #4063 of 4644
SPD - 2.5
vcore - 1.28
ram - +0.2
fsb - +0.2
(G)MCH - +0.1

at last stable, nut im confused about vcore, it isnt to high ? setting in bios are coorctly, means is 1.28 is 1.28 or maybe that board undervolt
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k ASRock P67 PRO 3 B3 Sapphire Radeon HD7950 Kingston 8192MB 1866MHz HyperX Predator CL9 (2x... 
Hard DriveHard DriveCoolingOS
HDD SAMSUNG 500GB HD502IJ OCZ 128GB 2,5 SATA SSD Vertex 4 Scythe Ninja 3 rev.B Windows 7 Ultimate x64 
MonitorPower
Samsung 23" F2380 Tagan TG600-U33 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k ASRock P67 PRO 3 B3 Sapphire Radeon HD7950 Kingston 8192MB 1866MHz HyperX Predator CL9 (2x... 
Hard DriveHard DriveCoolingOS
HDD SAMSUNG 500GB HD502IJ OCZ 128GB 2,5 SATA SSD Vertex 4 Scythe Ninja 3 rev.B Windows 7 Ultimate x64 
MonitorPower
Samsung 23" F2380 Tagan TG600-U33 
  hide details  
Reply
post #4064 of 4644
Quote:
Originally Posted by dragonisko View Post
SPD - 2.5
vcore - 1.28
ram - +0.2
fsb - +0.2
(G)MCH - +0.1

at last stable, nut im confused about vcore, it isnt to high ? setting in bios are coorctly, means is 1.28 is 1.28 or maybe that board undervolt
1.28V is fine. I think the max is 1.375V or around there for 45nm Wolfdale. You're fine. I hate the same board for my E6750. It's a great board. I even did the pencil mod, which made a big difference with higher voltages.
Number Cruncher
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 2700k @ 4.6 1.3V Gigabyte Z68XP UD4 MSI TF3 7950 3GB G. Skill 4x4GB Ripjaw Zs 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 256GB 2 - WD 750 GB Black WD 320GB Blue Lite-On DVD Drive 
CoolingOSMonitorPower
Corsair H80 Win 7 Pro x64 Acer P243w Corsair 750W TX 
CaseAudio
Lian Li PC-A71F Audioengine A2/Audioengine D1 DAC 
  hide details  
Reply
Number Cruncher
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 2700k @ 4.6 1.3V Gigabyte Z68XP UD4 MSI TF3 7950 3GB G. Skill 4x4GB Ripjaw Zs 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 256GB 2 - WD 750 GB Black WD 320GB Blue Lite-On DVD Drive 
CoolingOSMonitorPower
Corsair H80 Win 7 Pro x64 Acer P243w Corsair 750W TX 
CaseAudio
Lian Li PC-A71F Audioengine A2/Audioengine D1 DAC 
  hide details  
Reply
post #4065 of 4644
hey guys I have this same board the gigabyte GA-p35-ds3l and have a E4600 chip, I've been trying to get over 3.2 and am having a difficult time getting it higher, I've done the usual thats asked here pci=100 auto on the vga, i can actually get it to boot up under win7 at 3.4 on stock v-core but is unstable, I cannot seem to raise the core voltage for some reason, what settings are you all using on the e4600 , I have ozc ddr26400, the nvidia geforce 9600 gt, and the zulman fan 9500I think, am I trying to get to much out of this chip????
any help is appreciated. thanks
post #4066 of 4644
Quote:
Originally Posted by dragonisko View Post
SPD - 2.5
vcore - 1.28
ram - +0.2
fsb - +0.2
(G)MCH - +0.1

at last stable, nut im confused about vcore, it isnt to high ? setting in bios are coorctly, means is 1.28 is 1.28 or maybe that board undervolt
It's called Vdroop, and this board is notorious for it. Check your CPU-Z Vcore as to what you set it in BIOS.
Sky
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 *Lapped* @ 3.24GHz Gigabyte P35 DS3L Rev 2.0 EVGA GTX 465 G Skill 2x2GB PC2 8000 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA Sony W/ LightScribe DVD+RW XP LG 32" HDTV 
KeyboardPowerCaseMouse
Microsoft OCZ600SXS Antec 900 Microsoft Intelli Point 
Mouse Pad
Memory Foam Pad 
  hide details  
Reply
Sky
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 *Lapped* @ 3.24GHz Gigabyte P35 DS3L Rev 2.0 EVGA GTX 465 G Skill 2x2GB PC2 8000 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA Sony W/ LightScribe DVD+RW XP LG 32" HDTV 
KeyboardPowerCaseMouse
Microsoft OCZ600SXS Antec 900 Microsoft Intelli Point 
Mouse Pad
Memory Foam Pad 
  hide details  
Reply
post #4067 of 4644
Quote:
Originally Posted by dalephill2 View Post
hey guys I have this same board the gigabyte GA-p35-ds3l and have a E4600 chip, I've been trying to get over 3.2 and am having a difficult time getting it higher, I've done the usual thats asked here pci=100 auto on the vga, i can actually get it to boot up under win7 at 3.4 on stock v-core but is unstable, I cannot seem to raise the core voltage for some reason, what settings are you all using on the e4600 , I have ozc ddr26400, the nvidia geforce 9600 gt, and the zulman fan 9500I think, am I trying to get to much out of this chip????
any help is appreciated. thanks

What do you mean by "I can't seem to raise the Vcore"? When in BIOS you are hitting Alt+F1 to enable the expanded O/C Menu?
Sky
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 *Lapped* @ 3.24GHz Gigabyte P35 DS3L Rev 2.0 EVGA GTX 465 G Skill 2x2GB PC2 8000 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA Sony W/ LightScribe DVD+RW XP LG 32" HDTV 
KeyboardPowerCaseMouse
Microsoft OCZ600SXS Antec 900 Microsoft Intelli Point 
Mouse Pad
Memory Foam Pad 
  hide details  
Reply
Sky
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 *Lapped* @ 3.24GHz Gigabyte P35 DS3L Rev 2.0 EVGA GTX 465 G Skill 2x2GB PC2 8000 
Hard DriveOptical DriveOSMonitor
WD 250 GB SATA Sony W/ LightScribe DVD+RW XP LG 32" HDTV 
KeyboardPowerCaseMouse
Microsoft OCZ600SXS Antec 900 Microsoft Intelli Point 
Mouse Pad
Memory Foam Pad 
  hide details  
Reply
post #4068 of 4644
if you ,mean the bios menu yeah I can get to it no problem, once in the OCmenu I'll take it off auto to manual and proceed to try and raise it and it just resets itself when it tries to boot up. if thats ur question, any other info you need or pics just let me know thanks
post #4069 of 4644
Did you press F10 to save and quit?
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q9400@ 3.2GHz [400x8] Gigabyte P35-DS3L PNY GTX 295 Single PCB 2x2GB G.Skill @800MHz 4-3-3-8 
Hard DriveOSMonitorKeyboard
Crucial M4 128GB Windows 7 Utimate 64-bit Samsung P2350 Ducky DK9008 G2 
CaseMouseAudio
Lian Li PC-K62 Logitech G9 Laser Asus Xonar Essence STX 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q9400@ 3.2GHz [400x8] Gigabyte P35-DS3L PNY GTX 295 Single PCB 2x2GB G.Skill @800MHz 4-3-3-8 
Hard DriveOSMonitorKeyboard
Crucial M4 128GB Windows 7 Utimate 64-bit Samsung P2350 Ducky DK9008 G2 
CaseMouseAudio
Lian Li PC-K62 Logitech G9 Laser Asus Xonar Essence STX 
  hide details  
Reply
post #4070 of 4644
Quote:
It's called Vdroop, and this board is notorious for it. Check your CPU-Z Vcore as to what you set it in BIOS.
in cpu-z
energy save is 1.232
normal 1.248

in bios i have 1.28, so bios or the cpu-z showing correctly ?
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k ASRock P67 PRO 3 B3 Sapphire Radeon HD7950 Kingston 8192MB 1866MHz HyperX Predator CL9 (2x... 
Hard DriveHard DriveCoolingOS
HDD SAMSUNG 500GB HD502IJ OCZ 128GB 2,5 SATA SSD Vertex 4 Scythe Ninja 3 rev.B Windows 7 Ultimate x64 
MonitorPower
Samsung 23" F2380 Tagan TG600-U33 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k ASRock P67 PRO 3 B3 Sapphire Radeon HD7950 Kingston 8192MB 1866MHz HyperX Predator CL9 (2x... 
Hard DriveHard DriveCoolingOS
HDD SAMSUNG 500GB HD502IJ OCZ 128GB 2,5 SATA SSD Vertex 4 Scythe Ninja 3 rev.B Windows 7 Ultimate x64 
MonitorPower
Samsung 23" F2380 Tagan TG600-U33 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte GA-P35-DS3L Thread