Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte GA-P35-DS3L Thread
New Posts  All Forums:Forum Nav:

Gigabyte GA-P35-DS3L Thread - Page 93

post #921 of 4644
Ok well I have got my Q6600 at 3.2ghz with MCH, DDR, and FSB at +0.1V. The vcore is 1.3V in the Bios. It has been stable for almost 2 hours now with P95. My core temps have reached a max of 62C. The current room temp is 73.2F. Does anything think keeping this setup would be unsafe for the CPU? I can't see the room getting much hotter than it is now in the summer so I think I might be good. I will try to lower the vcore if the current setup stays stable.
Frenzy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6600 G0 @ 3.2GHZ GA-P35-DS3L BFG 512MB 8800 GT OC 4 X 1GB G.Skills 
Hard DriveOptical DriveOSMonitor
Seagate 250GB SATA NEC DVD-RW Vista 64 Bit 17" LCD 
PowerCase
650W Cooler Master Pro Cooler Master Centurion 5 
  hide details  
Reply
Frenzy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6600 G0 @ 3.2GHZ GA-P35-DS3L BFG 512MB 8800 GT OC 4 X 1GB G.Skills 
Hard DriveOptical DriveOSMonitor
Seagate 250GB SATA NEC DVD-RW Vista 64 Bit 17" LCD 
PowerCase
650W Cooler Master Pro Cooler Master Centurion 5 
  hide details  
Reply
post #922 of 4644
62C is not too bad while stress testing, but what program are you using to get that temp?
Low Tide
(12 items)
 
  
CPUMotherboardGraphicsRAM
i5-3570K @ 4.7GHz Asus P8Z77-V Pro EVGA GTX 670 FTW 8GB G. Skill 2133MHz 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 256GB Prolimatech Megahalems Rev. C Windows X Samsung T240HD 
KeyboardPowerCaseAudio
Ducky DK9008G2 Red Corsair TX850W V1 Corsair Carbide 300R X-Fi XtremeGamer 
  hide details  
Reply
Low Tide
(12 items)
 
  
CPUMotherboardGraphicsRAM
i5-3570K @ 4.7GHz Asus P8Z77-V Pro EVGA GTX 670 FTW 8GB G. Skill 2133MHz 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 256GB Prolimatech Megahalems Rev. C Windows X Samsung T240HD 
KeyboardPowerCaseAudio
Ducky DK9008G2 Red Corsair TX850W V1 Corsair Carbide 300R X-Fi XtremeGamer 
  hide details  
Reply
post #923 of 4644
Quote:
Originally Posted by losttsol View Post
62C is not too bad while stress testing, but what program are you using to get that temp?
I'm using Prime95. The Small FFT test.
Frenzy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6600 G0 @ 3.2GHZ GA-P35-DS3L BFG 512MB 8800 GT OC 4 X 1GB G.Skills 
Hard DriveOptical DriveOSMonitor
Seagate 250GB SATA NEC DVD-RW Vista 64 Bit 17" LCD 
PowerCase
650W Cooler Master Pro Cooler Master Centurion 5 
  hide details  
Reply
Frenzy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6600 G0 @ 3.2GHZ GA-P35-DS3L BFG 512MB 8800 GT OC 4 X 1GB G.Skills 
Hard DriveOptical DriveOSMonitor
Seagate 250GB SATA NEC DVD-RW Vista 64 Bit 17" LCD 
PowerCase
650W Cooler Master Pro Cooler Master Centurion 5 
  hide details  
Reply
post #924 of 4644
Quote:
Originally Posted by losttsol View Post
62C is not too bad while stress testing, but what program are you using to get that temp?
What temps do you hit at 3.6ghz while stress testing?
Frenzy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6600 G0 @ 3.2GHZ GA-P35-DS3L BFG 512MB 8800 GT OC 4 X 1GB G.Skills 
Hard DriveOptical DriveOSMonitor
Seagate 250GB SATA NEC DVD-RW Vista 64 Bit 17" LCD 
PowerCase
650W Cooler Master Pro Cooler Master Centurion 5 
  hide details  
Reply
Frenzy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6600 G0 @ 3.2GHZ GA-P35-DS3L BFG 512MB 8800 GT OC 4 X 1GB G.Skills 
Hard DriveOptical DriveOSMonitor
Seagate 250GB SATA NEC DVD-RW Vista 64 Bit 17" LCD 
PowerCase
650W Cooler Master Pro Cooler Master Centurion 5 
  hide details  
Reply
post #925 of 4644
Hey all! I just finished fiddling around with my board and a Q6600 G0 yesterday. I'm running at 3.15GHZ, 1.36 Vcore, and I believe +1 to MCH and FSB. I'm at work, so I'm not 100% sure, but relatively sure.

I ran memtest for about half an hour with no errors and Orthos for 9 hours with no cores failing, so it's 100% stable and that makes me feel great! My max temps were 55-56 using CoreTemp. I'd push it farther, but it seemed unstable at higher speeds. I'd have to raise the vcore among other settings of course. I also know 56 is a really good temp for a Q6600, so I'm not sure I should try to push it over that. Any way, I'm so happy with this mobo!!
OG's Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 @ 3.54 ASUS RAMPAGE EXTREME ASUS 4870 1GB's in CF 8 GB OCZ DDR3-1600 
Hard DriveOptical DriveOSMonitor
2X500 GB Seagate Barracuda, 1X WD 1TB BLACK Lite On 20X DVD RW etc Vista Ultimate x64 Dual 22" (Acer and Dell) 
PowerCaseMouse
700 Watt OCZ GameXSteam Damier Xaser V Logitech G9 
  hide details  
Reply
OG's Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 @ 3.54 ASUS RAMPAGE EXTREME ASUS 4870 1GB's in CF 8 GB OCZ DDR3-1600 
Hard DriveOptical DriveOSMonitor
2X500 GB Seagate Barracuda, 1X WD 1TB BLACK Lite On 20X DVD RW etc Vista Ultimate x64 Dual 22" (Acer and Dell) 
PowerCaseMouse
700 Watt OCZ GameXSteam Damier Xaser V Logitech G9 
  hide details  
Reply
post #926 of 4644
Quote:
Originally Posted by YK The OG View Post
Hey all! I just finished fiddling around with my board and a Q6600 G0 yesterday. I'm running at 3.15GHZ, 1.36 Vcore, and I believe +1 to MCH and FSB. I'm at work, so I'm not 100% sure, but relatively sure.

I ran memtest for about half an hour with no errors and Orthos for 9 hours with no cores failing, so it's 100% stable and that makes me feel great! My max temps were 55-56 using CoreTemp. I'd push it farther, but it seemed unstable at higher speeds. I'd have to raise the vcore among other settings of course. I also know 56 is a really good temp for a Q6600, so I'm not sure I should try to push it over that. Any way, I'm so happy with this mobo!!
Did you lap your Ultra 120 Extreme? I did not lap mine. I have the same setup and I get much higher temps than you at 3.0GHZ. I hit 62C at 3.2GHZ. I hit 60C at 3.0GHZ. Maybe your case is just better at keeping everything cooler than my Coolermaster Centurion 5. I have one 80mm intake fan and one 120mm exhaust plus the cpu fan blowing north through the heatsink into the power supply

Another note: I ran Prime95 for 2 hours at 3.2ghz with a vcore of 1.3V with no errors. I have FSB +0.1V and MCH +0.1V. I bet you could go lower on your vcore. I know 2 hours doesn't compare with the 9 hours of Orthos but you could possible do some tweaking. Well, if I had your temps I probably wouldn't bother actually
Frenzy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6600 G0 @ 3.2GHZ GA-P35-DS3L BFG 512MB 8800 GT OC 4 X 1GB G.Skills 
Hard DriveOptical DriveOSMonitor
Seagate 250GB SATA NEC DVD-RW Vista 64 Bit 17" LCD 
PowerCase
650W Cooler Master Pro Cooler Master Centurion 5 
  hide details  
Reply
Frenzy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6600 G0 @ 3.2GHZ GA-P35-DS3L BFG 512MB 8800 GT OC 4 X 1GB G.Skills 
Hard DriveOptical DriveOSMonitor
Seagate 250GB SATA NEC DVD-RW Vista 64 Bit 17" LCD 
PowerCase
650W Cooler Master Pro Cooler Master Centurion 5 
  hide details  
Reply
post #927 of 4644
Quote:
Originally Posted by frenzee77 View Post
What temps do you hit at 3.6ghz while stress testing?
What are your idle/load temps? I'm curious because I have the same setup as you do, and currently at 3.4ghz. 25c idle 50c max load I have obtained at 1.36vcore. Not sure if thats about right for this cooler... So please let me know what your idle/load temps are so I can see if my temps are about right...

NOTE: I have a lapped based on my heatsink.
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
q6600 (1.2125 VID) @ 3.7 1.37vcore DFI x38 Dark Visiontek 4870's Crossfired 4GB DDR2-800 GSkill 
Hard DriveOptical DriveOSMonitor
2 x 640gb WD Raid Sony Blu-Ray Writer Windows 7 64bit 32" Sharp Aquos 1080p HDTV 
KeyboardPowerCaseMouse
Razer Lycos BFG 800 watt Antec 900 Razer DeathAdder 
Mouse Pad
Razer eXactMat 
  hide details  
Reply
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
q6600 (1.2125 VID) @ 3.7 1.37vcore DFI x38 Dark Visiontek 4870's Crossfired 4GB DDR2-800 GSkill 
Hard DriveOptical DriveOSMonitor
2 x 640gb WD Raid Sony Blu-Ray Writer Windows 7 64bit 32" Sharp Aquos 1080p HDTV 
KeyboardPowerCaseMouse
Razer Lycos BFG 800 watt Antec 900 Razer DeathAdder 
Mouse Pad
Razer eXactMat 
  hide details  
Reply
post #928 of 4644
Quote:
Originally Posted by slaney30 View Post
What are your idle/load temps? I'm curious because I have the same setup as you do, and currently at 3.4ghz. 25c idle 50c max load I have obtained at 1.36vcore. Not sure if thats about right for this cooler... So please let me know what your idle/load temps are so I can see if my temps are about right...

NOTE: I have a lapped based on my heatsink.
Not to rudely interject, but that sounds like it's working perfectly.
Current System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Gigabyte EP43-UD3L PNY GTX 260 Core 216 G.Skill DDR2 1000 2x2gb 
Hard DriveOptical DriveOSMonitor
Western Digital SATA 500GB Liteon DVD-RW DL 20x (x2) Microsoft Vista 64bit LG 23" LED + Acer 19" LCD 
KeyboardPowerCaseMouse
Logitech G15 Rosewill RP550-2 Coolermaster 690 Logitech G500 
  hide details  
Reply
Current System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Gigabyte EP43-UD3L PNY GTX 260 Core 216 G.Skill DDR2 1000 2x2gb 
Hard DriveOptical DriveOSMonitor
Western Digital SATA 500GB Liteon DVD-RW DL 20x (x2) Microsoft Vista 64bit LG 23" LED + Acer 19" LCD 
KeyboardPowerCaseMouse
Logitech G15 Rosewill RP550-2 Coolermaster 690 Logitech G500 
  hide details  
Reply
post #929 of 4644
Quote:
Originally Posted by NP2H View Post
Could be your memory for sure - if you can get up again, run a memtest on the sticks individually. Also, feel them when it shuts down and see if they're hot to the touch. Changing the configuration in BIOS could cause them to overheat.

Other thoughts: could be your power supply. People have had problems with the one you're using. Do you have another you could try?
thanks NP2H good tip ...it was my ram...ordered some G.SKILL 4GB(2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1000 from the egg fixed it right up thanks again
post #930 of 4644
Quote:
Originally Posted by NP2H View Post
Not to rudely interject, but that sounds like it's working perfectly.
No thats cool, I didnt know what to expect with a quad core and temps on a 120 ultra extreme. I just was curious what others load temps were like and at what voltage they were at...
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
q6600 (1.2125 VID) @ 3.7 1.37vcore DFI x38 Dark Visiontek 4870's Crossfired 4GB DDR2-800 GSkill 
Hard DriveOptical DriveOSMonitor
2 x 640gb WD Raid Sony Blu-Ray Writer Windows 7 64bit 32" Sharp Aquos 1080p HDTV 
KeyboardPowerCaseMouse
Razer Lycos BFG 800 watt Antec 900 Razer DeathAdder 
Mouse Pad
Razer eXactMat 
  hide details  
Reply
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
q6600 (1.2125 VID) @ 3.7 1.37vcore DFI x38 Dark Visiontek 4870's Crossfired 4GB DDR2-800 GSkill 
Hard DriveOptical DriveOSMonitor
2 x 640gb WD Raid Sony Blu-Ray Writer Windows 7 64bit 32" Sharp Aquos 1080p HDTV 
KeyboardPowerCaseMouse
Razer Lycos BFG 800 watt Antec 900 Razer DeathAdder 
Mouse Pad
Razer eXactMat 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte GA-P35-DS3L Thread