Originally Posted by BlackOmega
That seems more like a CPU limitation. Lower your multiplier some more drop RAM divider all the way down and see how high you can get the board to post.
Also, what are you using to read your temps? If I could get 42*c under full load Id be super happy. Download coretemp
and run that. Tell me what your load temps are then.
Yeah I have core temp which is why I say 42C is high(hmm not 42....)
Core temp:47, 58
...under dual stress prime(hmm thats...not good
) I think I need to get some airflow in my case...
As for chip limitations. I guess it is possible, but burn had a few different chips in here and I don't think he ever got stable over 333 even with a low multiplier. When I bought it he tried running 350x6 I think it was and it didn't finish super PI 8M. I have booted my opteron at 350 x 9 (got into windows and stressed for about 30 min before it failed). I guess I just need to try some serious experimenting. Maybe put my 3000+ in here and lower the multiplier to see whats up. Under water at the 350 and about 1.5 vcore?.......my core temps were under 55, but they were still different by about 10C.
Looking at Smartguardian reminded me of how how my PWM IC gets.....over 60C it turns red. I thin I looked it up and found that that is typical?