Originally Posted by blitz6804
Epic typos... those should 9.X, not 4.X.
As to your power strip: check the joules rating for surges before you do that. You might start having amperage overdraw putting that many PCs on one breaker.
Originally Posted by thlnk3r
BlackOmega, check the rating on the powerstrip to see if it can handle it. More than likely you'll be fine. What you need to worry about is what else is on that same circuit in your home. Three systems running full load will draw at least 2.5 - 3 amps if not more. Are these going to be folders?
The power strip I bought was rated highly for power going through it. Hell it has ~4AWG power wire (possibly larger).
I believe it was rated @ 110amps. Basically the highest power handling capacity they had in the store.
Only 2 of the rigs are going to be folding 24/7. The 3rd, my sig rig, is primarily for gaming, perusing the net and watching movies. But I believe that it will have the highest power draw of all the rigs simply due to the amount of hardware inside it.
I suppose the worst that can happen is I trip a breaker.
Well, I'm about to start modding the second ultra-D. It appears that it does have epoxy over the pins. I'll take pics, hopefully they'll turn out better than the ones of my NB cooler. Once I'm done I'll be able to see if lapping it really helps or not since the boards will in essence be identical other than the CPU.
Pio, sorry to hear about your loss.
those parts together should've fetched at least double that, if not triple.
Hope you find a job soon.